Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Hydraulics & Fluid Mechanics: Fluid Kinematics & Dynamics

Civil Engineering · Hydraulics & Fluid Mechanics

35 questions, each with the answer and a worked solution. Notes on units and constants are at the top.

Practice interactively and track your score →

Units and constants

SI units throughout. Take g = 9.81 m/s² and the density of water as 1000 kg/m³ wherever a value is needed.

Question 1

In steady flow, the streamline, pathline and streakline through a given point are

  1. identical, because the velocity field at each point does not change with time
  2. identical only when the flow is uniform and the pressure is constant
  3. identical only when the flow is also rotational and the fluid is viscous
  4. different, because a pathline always crosses the local streamlines
Show answer & solution

Answer: (A) identical, because the velocity field at each point does not change with time

In steady flow the velocity at every point is time-independent, so all fluid particles passing a point follow the same curve, and the three lines coincide.

Question 2

Laminar flow in a circular pipe has a mean velocity of 2 m/s. Taking the kinetic energy correction factor α = 2, the true kinetic energy head per unit weight is

  1. 0.102 m
  2. 0.204 m
  3. 0.306 m
  4. 0.408 m
Show answer & solution

Answer: (D) 0.408 m

Head = αV²/2g = 2 × 4/(2 × 9.81) ≈ 0.408 m, twice the 0.204 m obtained from the mean velocity alone.

Question 3

A fluid rotates as a rigid body (solid-body rotation) at 4 rad/s. The circulation around a circle of radius 0.5 m centred on the axis of rotation is

  1. 6.28 m²/s
  2. 12.57 m²/s
  3. 25.13 m²/s
  4. 50.27 m²/s
Show answer & solution

Answer: (A) 6.28 m²/s

Γ = (ωr)(2πr) = 4 × 0.5 × 2π × 0.5 = 2π ≈ 6.28 m²/s, which equals vorticity (2ω) times the enclosed area.

Question 4

In a free vortex (irrotational vortex), the tangential velocity varies with radius r as

  1. directly proportional to r, so V/r remains constant
  2. independent of r, so V remains constant everywhere
  3. proportional to r², so V/r² remains constant
  4. inversely proportional to r, so V·r remains constant
Show answer & solution

Answer: (D) inversely proportional to r, so V·r remains constant

A free vortex has constant circulation, Γ = 2πrV, so V = Γ/(2πr) ∝ 1/r, and the flow is irrotational except at the centre.

Question 5

A water jet of 50 mm diameter and velocity 20 m/s strikes a single flat plate held normal to the jet, and the plate moves away in the direction of the jet at 5 m/s. The force on the plate is

  1. 196 N
  2. 442 N
  3. 589 N
  4. 785 N
Show answer & solution

Answer: (B) 442 N

For a single moving plate F = ρA(V − u)² = 1000 × 0.001963 × 15² ≈ 442 N.

Question 6

The force exerted by a fluid on a pipe bend is obtained by applying the momentum equation, which accounts for

  1. the change in kinetic energy flux and the friction loss in the bend
  2. the change in momentum flux and the pressure forces at the inlet and outlet
  3. the change in potential head and the weight of the pipe itself
  4. the change in volume flow and the viscous shear along the walls
Show answer & solution

Answer: (B) the change in momentum flux and the pressure forces at the inlet and outlet

The net external force on the water equals the rate of change of momentum, and includes pressure forces at both sections plus the bend reaction; the water exerts an equal and opposite force on the bend.

Question 7

In a flow net beneath a dam there are 4 flow channels and 12 equipotential drops. The head loss is 6 m and the soil permeability is 2 × 10⁻⁵ m/s. The seepage per metre length of dam is

  1. 4.0 × 10⁻⁵ m³/s
  2. 1.2 × 10⁻⁴ m³/s
  3. 3.6 × 10⁻⁴ m³/s
  4. 5.8 × 10⁻³ m³/s
Show answer & solution

Answer: (A) 4.0 × 10⁻⁵ m³/s

q = kH(Nf/Nd) = 2 × 10⁻⁵ × 6 × 4/12 = 4 × 10⁻⁵ m³/s per metre.

Question 8

Two streamlines in a steady flow cannot intersect because, at the intersection point,

  1. the fluid would need two different velocity directions at the same instant
  2. the flow would necessarily become turbulent with zero viscosity
  3. the continuity equation would give a negative discharge there
  4. the pressure would become infinite and the density would vanish
Show answer & solution

Answer: (A) the fluid would need two different velocity directions at the same instant

A streamline is tangent to the velocity vector; crossing lines would imply two velocity directions at one point, which is impossible.

Question 9

In an unsteady one-dimensional flow the velocity is u = 2xt (m/s), with x in metres and t in seconds. The total acceleration of a particle at x = 1 m and t = 2 s is

  1. 2 m/s²
  2. 16 m/s²
  3. 18 m/s²
  4. 36 m/s²
Show answer & solution

Answer: (C) 18 m/s²

a = ∂u/∂t + u ∂u/∂x = 2x + 4xt² = 2(1) + 4(1)(4) = 18 m/s².

Question 10

Compared with laminar flow, the correction factors α and β for turbulent flow in a pipe are

  1. exactly equal to zero, because eddies cancel the momentum flux
  2. much closer to unity, because the velocity profile is flatter
  3. equal to the Reynolds number, because inertia dominates
  4. much larger than 2, because the velocity profile is more peaked
Show answer & solution

Answer: (B) much closer to unity, because the velocity profile is flatter

The turbulent profile is nearly uniform across most of the section, so α is about 1.05 to 1.1 and β is about 1.02, which are close to 1.

Question 11

According to Stokes' theorem, the circulation around a closed curve in a flow field equals the

  1. surface integral of vorticity over the area enclosed by the curve
  2. line integral of pressure around the closed curve in the field
  3. surface integral of velocity over the area enclosed by the curve
  4. volume integral of density over the region enclosed by the curve
Show answer & solution

Answer: (A) surface integral of vorticity over the area enclosed by the curve

Stokes' theorem gives Γ = ∮V·ds = ∬ζ dA, so an irrotational flow has zero circulation around any closed curve not enclosing a singularity.

Question 12

In a flow with no pumps or turbines, the energy grade line is higher than the hydraulic grade line by a vertical distance equal to the

  1. pressure head p/γ at that section
  2. velocity head V²/2g at that section
  3. total friction head loss up to that section
  4. elevation head z measured from the datum
Show answer & solution

Answer: (B) velocity head V²/2g at that section

EGL = p/γ + z + V²/2g and HGL = p/γ + z, so the difference is the velocity head V²/2g.

Question 13

In a flow net, regions where the streamlines are closer together indicate

  1. a higher velocity, since the same flow passes through a narrower channel
  2. a lower velocity, since the pressure is greater in such channels
  3. zero velocity, since the fluid is trapped between streamlines
  4. unchanged velocity, since discharge is divided equally anyway
Show answer & solution

Answer: (A) a higher velocity, since the same flow passes through a narrower channel

Each flow channel carries the same discharge, so a narrower channel means a larger velocity.

Question 14

Water flows at 0.05 m³/s through a horizontal 90° bend of constant 100 mm diameter. Neglecting pressure forces and weight, the magnitude of the resultant force of the water on the bend is approximately

  1. 225 N
  2. 318 N
  3. 450 N
  4. 637 N
Show answer & solution

Answer: (C) 450 N

V = Q/A = 0.05/0.007854 = 6.37 m/s; F = √2 ρQV = 1.414 × 1000 × 0.05 × 6.37 ≈ 450 N.

Question 15

A flow has velocity potential φ = 2x² − 2y² (m²/s), with u = −∂φ/∂x and v = −∂φ/∂y. At the point (1 m, 2 m) the resultant velocity is

  1. 2.00 m/s
  2. 4.00 m/s
  3. 8.00 m/s
  4. 8.94 m/s
Show answer & solution

Answer: (D) 8.94 m/s

u = −4x = −4 m/s and v = 4y = 8 m/s, so V = √(16 + 64) = √80 ≈ 8.94 m/s.

Question 16

For a two-dimensional flow with u = 2y and v = 6x (in m/s, with x and y in metres), the angular velocity ωz of a fluid particle is

  1. 2 rad/s
  2. 4 rad/s
  3. 6 rad/s
  4. 8 rad/s
Show answer & solution

Answer: (A) 2 rad/s

ωz = ½(∂v/∂x − ∂u/∂y) = ½(6 − 2) = 2 rad/s.

Question 17

A pump lifts water at 0.1 m³/s and adds a head of 20 m to the flow. Ignoring pump inefficiency, the power delivered to the water is

  1. 1.96 kW
  2. 9.81 kW
  3. 19.62 kW
  4. 196.2 kW
Show answer & solution

Answer: (C) 19.62 kW

P = ρgQH = 1000 × 9.81 × 0.1 × 20 = 19 620 W ≈ 19.62 kW.

Question 18

A flow is steady but non-uniform. Which of the following statements about the acceleration of a fluid particle is correct?

  1. Both local and convective accelerations are zero
  2. The convective acceleration is zero but the local acceleration is not zero
  3. Both local and convective accelerations are non-zero
  4. The local acceleration is zero but the convective acceleration is not zero
Show answer & solution

Answer: (D) The local acceleration is zero but the convective acceleration is not zero

Steady flow means ∂V/∂t = 0 (no local acceleration); non-uniformity means velocity changes in space, so convective acceleration V·∇V is non-zero.

Question 19

In a correctly drawn flow net for isotropic seepage, the flow lines and equipotential lines

  1. intersect at right angles and form long rectangles of unit aspect
  2. intersect at 45° angles and form approximate curvilinear rhombi
  3. intersect at right angles and form approximate curvilinear squares
  4. never intersect, but run parallel to each other near boundaries
Show answer & solution

Answer: (C) intersect at right angles and form approximate curvilinear squares

Orthogonality and equal side lengths in each mesh (curvilinear squares) are the basic conditions for a flow net.

Question 20

At a stagnation point in an ideal fluid flow around a body, the

  1. velocity is maximum and the pressure is at its minimum
  2. velocity is the free-stream value and the pressure is atmospheric
  3. velocity and pressure are both equal to zero there
  4. velocity is zero and the pressure is at its maximum for the flow
Show answer & solution

Answer: (D) velocity is zero and the pressure is at its maximum for the flow

At a stagnation point V = 0, so Bernoulli's equation gives p₀ = p + ½ρV², the maximum (stagnation) pressure.

Question 21

For fully developed laminar flow in a circular pipe, the kinetic energy correction factor α and momentum correction factor β are, respectively,

  1. 1 and 1
  2. 2 and 4/3
  3. 4/3 and 2
  4. 1.5 and 1.1
Show answer & solution

Answer: (B) 2 and 4/3

With a parabolic velocity profile, α = 2 and β = 4/3; both equal 1 for a uniform velocity profile.

Question 22

Water flows horizontally through a frictionless nozzle section. The inlet pressure is 200 kPa where the velocity is 2 m/s, and the throat velocity is 8 m/s. The pressure at the throat is

  1. 140 kPa
  2. 170 kPa
  3. 188 kPa
  4. 230 kPa
Show answer & solution

Answer: (B) 170 kPa

p₂ = p₁ + ½ρ(V₁² − V₂²) = 200 000 + 500(4 − 64) = 170 000 Pa = 170 kPa.

Question 23

A pitot tube in an air stream (ρ = 1.2 kg/m³) records a difference of 600 Pa between stagnation and static pressures. The air velocity is

  1. 15.8 m/s
  2. 22.4 m/s
  3. 24.5 m/s
  4. 31.6 m/s
Show answer & solution

Answer: (D) 31.6 m/s

V = √(2Δp/ρ) = √(2 × 600/1.2) = √1000 ≈ 31.6 m/s.

Question 24

The stream function ψ satisfies Laplace's equation (∇²ψ = 0) when the two-dimensional flow is

  1. irrotational, since vorticity is proportional to ∇²ψ
  2. incompressible, since density is then constant everywhere in the field
  3. uniform, since velocity gradients are then zero throughout the domain
  4. steady, since time derivatives then vanish in the continuity equation
Show answer & solution

Answer: (A) irrotational, since vorticity is proportional to ∇²ψ

Vorticity ωz = −½∇²ψ, so ∇²ψ = 0 requires irrotational flow (the stream function already satisfies continuity for incompressible flow).

Question 25

A forced vortex, in which a fluid rotates as a rigid body, is an example of

  1. irrotational flow, whose tangential velocity is constant with radius
  2. rotational flow, whose tangential velocity is inversely proportional to radius
  3. irrotational flow, whose tangential velocity is inversely proportional to radius
  4. rotational flow, whose tangential velocity is directly proportional to radius
Show answer & solution

Answer: (D) rotational flow, whose tangential velocity is directly proportional to radius

In a forced vortex V = ωr with vorticity 2ω ≠ 0, so the flow is rotational.

Question 26

When a pump is installed between sections 1 and 2 in a pipeline, the energy equation including the pump head hp is written as

  1. p₁/γ + V₁²/2g + z₁ − hp = p₂/γ + V₂²/2g + z₂ − hL
  2. p₁/γ + V₁²/2g + z₁ = p₂/γ + V₂²/2g + z₂ + hp + hL
  3. p₁/γ + V₁²/2g + z₁ + hp = p₂/γ + V₂²/2g + z₂ + hL
  4. p₁/γ + V₁/2g + z₁ + hp = p₂/γ + V₂/2g + z₂ + hL
Show answer & solution

Answer: (C) p₁/γ + V₁²/2g + z₁ + hp = p₂/γ + V₂²/2g + z₂ + hL

A pump adds energy to the flow, so hp appears on the upstream side and the head losses hL on the downstream side of the energy equation.

Question 27

Water flows steadily through a pipe that reduces from 300 mm diameter to 150 mm diameter. If the velocity in the 300 mm section is 2 m/s, the velocity in the 150 mm section is

  1. 0.5 m/s
  2. 2 m/s
  3. 4 m/s
  4. 8 m/s
Show answer & solution

Answer: (D) 8 m/s

From continuity, A₁V₁ = A₂V₂, so V₂ = 2 × (300/150)² = 2 × 4 = 8 m/s.

Question 28

Which of the following two-dimensional velocity fields can represent a possible incompressible flow?

  1. u = x², v = y²
  2. u = 3x, v = 3y
  3. u = 3x, v = −3y
  4. u = 2x, v = y
Show answer & solution

Answer: (C) u = 3x, v = −3y

Continuity for incompressible flow requires ∂u/∂x + ∂v/∂y = 0; this holds only for u = 3x, v = −3y (3 − 3 = 0).

Question 29

A two-dimensional flow has stream function ψ = 2xy (m²/s). At the point (3 m, 2 m), the resultant velocity is

  1. 4.47 m/s
  2. 7.21 m/s
  3. 10.00 m/s
  4. 12.00 m/s
Show answer & solution

Answer: (B) 7.21 m/s

u = ∂ψ/∂y = 2x = 6 m/s and v = −∂ψ/∂x = −2y = −4 m/s, so V = √(36 + 16) = √52 ≈ 7.21 m/s.

Question 30

The velocity potential φ satisfies Laplace's equation (∇²φ = 0) when the flow is

  1. steady and rotational, which makes pressure vary linearly with depth
  2. rotational and compressible, which makes density vary with position
  3. irrotational and incompressible, which makes φ and the continuity equation consistent
  4. uniform and viscous, which makes shear stress proportional to strain
Show answer & solution

Answer: (C) irrotational and incompressible, which makes φ and the continuity equation consistent

Irrotationality allows V = ∇φ (or −∇φ), and substituting in the incompressible continuity equation ∇·V = 0 gives ∇²φ = 0.

Question 31

In a two-dimensional flow, the vorticity at a point is equal to

  1. twice the angular velocity of the fluid particle at that point
  2. the circulation per unit length of the nearest streamline
  3. the angular velocity of the particle multiplied by its radius
  4. half the angular velocity of the fluid particle at that point
Show answer & solution

Answer: (A) twice the angular velocity of the fluid particle at that point

Vorticity ζ = ∂v/∂x − ∂u/∂y = 2ωz, which is twice the rotation rate of the particle.

Question 32

A jet strikes a series of flat vanes mounted on a wheel so that the whole jet is always intercepted. Compared with a single moving plate, the mass of water striking the vanes per second is

  1. zero, because the jet is deflected away before reaching them
  2. only ρa(V − u), because the plate recedes from the jet
  3. the full jet discharge ρaV, because successive vanes use all of the flow
  4. only ρaV/2, because half of the flow is lost at the edges
Show answer & solution

Answer: (C) the full jet discharge ρaV, because successive vanes use all of the flow

For a series of vanes, no water is wasted, so the mass rate is ρaV and the force is ρaV(V − u), unlike a single plate, where only ρa(V − u) strikes.

Question 33

Bernoulli's equation can be applied between any two points in a flow field (not only along one streamline) when the flow is

  1. steady, compressible, viscous and irrotational
  2. steady, incompressible, inviscid and irrotational
  3. unsteady, incompressible, inviscid and rotational
  4. steady, incompressible, viscous and uniform
Show answer & solution

Answer: (B) steady, incompressible, inviscid and irrotational

For irrotational flow the Bernoulli constant is the same for all streamlines, so one equation holds throughout the flow field.

Question 34

A jet of water 50 mm in diameter with a velocity of 20 m/s strikes a stationary flat plate held normal to the jet. The force exerted on the plate is

  1. 393 N
  2. 785 N
  3. 1571 N
  4. 3142 N
Show answer & solution

Answer: (B) 785 N

F = ρAV² = 1000 × (π/4)(0.05)² × 20² = 1000 × 0.001963 × 400 ≈ 785 N.

Question 35

A streakline is best described as the

  1. line whose tangent gives the velocity direction at that instant
  2. curve joining points of equal velocity potential in the flow field
  3. locus at an instant of all particles that have passed through a fixed point
  4. path traced by one particular fluid particle over a period of time
Show answer & solution

Answer: (C) locus at an instant of all particles that have passed through a fixed point

Dye injected continuously at a fixed point forms a streakline, which joins all particles that have earlier passed through that point.

Practice these 35 questions interactively →