SI units throughout. Take g = 9.81 m/s² and the density of water as 1000 kg/m³ wherever a value is needed.
Question 1
A block floats at rest first in water and then in mercury. Compared with water, the buoyant force on the block in mercury is
the same, but the submerged volume is smaller
larger, because mercury is denser
smaller, because less volume is submerged
the same, and the submerged volume is also the same
Show answer & solution
Answer: (A) the same, but the submerged volume is smaller
For a floating body buoyant force equals its weight in both liquids; the denser liquid needs less displaced volume.
Question 2
A rectangular wooden block of relative density 0.6 and height 0.5 m floats in water with its axis vertical. The depth of immersion is
0.30 m
0.40 m
0.50 m
0.60 m
Show answer & solution
Answer: (A) 0.30 m
Depth of immersion = relative density × height = 0.6 × 0.5 = 0.30 m.
Question 3
When a loaded ship passes from the sea into a freshwater river, it
rises higher because fresh water is less dense
sinks deeper while the buoyant force stays equal to its weight
sinks deeper because its weight increases
stays at the same draught because weight is unchanged
Show answer & solution
Answer: (B) sinks deeper while the buoyant force stays equal to its weight
Weight is constant, so the buoyant force is unchanged; lower density needs more displaced volume, so the draught increases.
Question 4
A solid sphere of diameter 0.5 m is held completely submerged in fresh water. The buoyant force on it is nearly
321 N
642 N
2568 N
5137 N
Show answer & solution
Answer: (B) 642 N
F = ρgV = 1000 × 9.81 × (π/6)(0.5)³ = 1000 × 9.81 × 0.06545 ≈ 642 N.
Question 5
An ice cube floats in a glass of water filled to the brim. When the ice melts completely, the water level
rises and water overflows the glass
remains unchanged and nothing overflows
falls slightly below the brim
first rises and then falls back
Show answer & solution
Answer: (B) remains unchanged and nothing overflows
Floating ice displaces water equal to its own weight, which is exactly the volume of water it forms on melting.
Question 6
A boat carrying a heavy stone floats in a small pond. If the stone is thrown into the pond, the pond water level
falls slightly
rises slightly
remains exactly the same
rises, then returns to the original level
Show answer & solution
Answer: (A) falls slightly
In the boat the stone displaces water equal to its weight; once sunk it displaces only its own (smaller) volume, so the level falls.
Question 7
A rectangular barge 12 m long and 6 m wide floats at a draught of 1.5 m. Its centre of gravity is 1.8 m from the keel, measured upward. The metacentric height for rolling is
0.20 m
0.95 m
2.00 m
3.05 m
Show answer & solution
Answer: (B) 0.95 m
BM = B²/(12d) = 36/18 = 2.00 m; BG = 1.8 − 0.75 = 1.05 m; GM = BM − BG = 0.95 m.
Question 8
For a floating body in which the centre of gravity G is higher than the centre of buoyancy B, the metacentric height is given by
GM = BM + BG
GM = BG − BM
GM = BM × BG
GM = BM − BG
Show answer & solution
Answer: (D) GM = BM − BG
The metacentre M is BM higher than B, and G is BG higher than B, so GM = BM − BG.
Question 9
A ship has a radius of gyration of 3.0 m about its longitudinal axis and a metacentric height of 0.9 m. Its time period of rolling is nearly
1.01 s
3.66 s
6.34 s
19.87 s
Show answer & solution
Answer: (C) 6.34 s
T = 2π√(k²/(g·GM)) = 2π√(9/(9.81×0.9)) ≈ 6.34 s.
Question 10
To find the metacentric radius BM for the rolling of a ship, the second moment of area I of the waterplane is taken about
the transverse centroidal axis of the waterplane
the keel line of the ship
the free surface of the water
the longitudinal centroidal axis of the waterplane
Show answer & solution
Answer: (D) the longitudinal centroidal axis of the waterplane
Rolling is rotation about the longitudinal axis, so I = (length × beam³)/12 about that centroidal axis is used in BM = I/V.
Question 11
If the metacentric height of a ship is increased to four times its value, its time period of rolling becomes
one-quarter of the original value
double the original value
four times the original value
half of the original value
Show answer & solution
Answer: (D) half of the original value
T = 2π√(k²/(g·GM)) varies as 1/√GM, so a fourfold GM halves the period.
Question 12
A tank of water is accelerated horizontally at 2.943 m/s². The slope (tan θ) of the free surface with the horizontal is
0.03
0.15
0.30
3.33
Show answer & solution
Answer: (C) 0.30
tan θ = a/g = 2.943/9.81 = 0.30.
Question 13
Placing heavy ballast low in the hull of a ship mainly serves to
lower the centre of gravity and increase the metacentric height
raise the centre of buoyancy to the metacentre
decrease the draught and the displaced volume
reduce the weight of water displaced by the hull
Show answer & solution
Answer: (A) lower the centre of gravity and increase the metacentric height
Ballast lowers G, reducing BG and so increasing GM = BM − BG; it also adds weight and so increases the draught.
Question 14
An open cylindrical tank of radius 0.5 m containing water is rotated about its vertical axis at 60 rpm. The water surface at the wall is higher than the vertex of the paraboloid by
0.01 m
0.13 m
0.25 m
0.50 m
Show answer & solution
Answer: (D) 0.50 m
ω = 2π(60)/60 = 6.283 rad/s; h = ω²r²/(2g) = 39.48 × 0.25/19.62 ≈ 0.50 m.
Question 15
The loss of stability caused by partly filled liquid tanks in a ship is called the free-surface effect, which
reduces the effective metacentric height
increases the effective metacentric height
raises the centre of buoyancy
lowers the centre of gravity of the ship
Show answer & solution
Answer: (A) reduces the effective metacentric height
Liquid shifting in a slack tank moves the effective centre of gravity upward, which reduces the effective GM.
Question 16
The free surface of a liquid rotating with constant angular velocity about a vertical axis, as a rigid body, takes the form of
a cone with its apex at the axis
a sphere centred on the axis
a plane inclined to the horizontal
a paraboloid of revolution
Show answer & solution
Answer: (D) a paraboloid of revolution
From dp = ρω²r dr − ρg dz the free surface is z = ω²r²/(2g), a paraboloid of revolution.
Question 17
A tank contains water to a depth of 2 m and is accelerated vertically upward at 3 m/s². The gauge pressure at the bottom is
12.81 kPa
13.62 kPa
19.62 kPa
25.62 kPa
Show answer & solution
Answer: (D) 25.62 kPa
p = ρ(g + a)h = 1000 × 12.81 × 2 = 25620 Pa = 25.62 kPa.
Question 18
In a liquid rotating as a forced vortex in an open vessel, at a fixed horizontal level the pressure
increases linearly with the radial distance
decreases with the square of the radial distance
increases with the square of the radial distance
is constant over the entire horizontal section
Show answer & solution
Answer: (C) increases with the square of the radial distance
Pressure p = ρgh + ρω²r²/2 at a given level, so it grows with r².
Question 19
A hydrometer of mass 30 g has a cylindrical stem of diameter 8 mm. It floats in water and is then placed in oil of relative density 0.8. The additional length of stem that sinks in the oil is nearly
3.7 cm
7.5 cm
14.9 cm
59.7 cm
Show answer & solution
Answer: (C) 14.9 cm
Extra volume = 30/0.8 − 30 = 7.5 cm³; stem area = π/4(0.8)² = 0.503 cm²; length = 7.5/0.503 ≈ 14.9 cm.
Question 20
A tank of liquid moving with constant horizontal acceleration has its free surface inclined such that the surface is
perpendicular to the resultant of gravity and the inertial force
parallel to the direction of acceleration
perpendicular to the direction of acceleration
perpendicular to the gravity vector alone
Show answer & solution
Answer: (A) perpendicular to the resultant of gravity and the inertial force
Isobars and the free surface are normal to the effective gravity vector g − a, giving tan θ = a/g.
Question 21
A hydrometer floats higher in a liquid of greater density because
its weight decreases in the denser liquid
the buoyant force becomes larger than its weight
a smaller volume must be displaced to balance its fixed weight
the stem volume shrinks in the denser liquid
Show answer & solution
Answer: (C) a smaller volume must be displaced to balance its fixed weight
Weight is constant and equals ρ·g·V displaced, so a larger ρ means a smaller submerged volume.
Question 22
Ice of density 917 kg/m³ floats in sea water of density 1025 kg/m³. The percentage of the ice volume that projects out of the water is nearly
8.3 %
10.5 %
89.5 %
91.7 %
Show answer & solution
Answer: (B) 10.5 %
Submerged fraction = 917/1025 = 0.895, so the exposed fraction = 1 − 0.895 ≈ 10.5%.
Question 23
A tall, slender homogeneous cylinder floating with its axis vertical is more likely to become unstable when its
height-to-diameter ratio is small
height-to-diameter ratio is large
diameter is large relative to height
it floats in a liquid that is perfectly calm
Show answer & solution
Answer: (B) height-to-diameter ratio is large
BM = D²/(16d) falls as the cylinder gets taller and thinner, so GM can become negative and the cylinder topples.
Question 24
A stone weighs 50 N in air and 30 N when fully immersed in water. The relative density of the stone is
0.60
1.67
2.50
3.33
Show answer & solution
Answer: (C) 2.50
Buoyant force = 50 − 30 = 20 N, so relative density = weight in air / buoyant force = 50/20 = 2.50.
Question 25
The Plimsoll load line marks on a ship's hull are provided mainly to
indicate the position of the centre of gravity of the hull
show the maximum safe speed in a given sea
measure the metacentric height while in service
limit loading for the different water densities and seasons encountered
Show answer & solution
Answer: (D) limit loading for the different water densities and seasons encountered
Load lines set the permissible draught for different water densities, because a ship floats deeper in fresh water than in sea water.
Question 26
To dive, a submarine admits water into its ballast tanks so that
its weight exceeds the buoyant force at the same displaced volume
its volume decreases below the surface
the buoyant force exceeds the weight
its centre of buoyancy drops below the hull
Show answer & solution
Answer: (A) its weight exceeds the buoyant force at the same displaced volume
Flooding the tanks increases weight while the displaced volume is unchanged, so W exceeds the buoyant force.
Question 27
A uniform solid cylinder of diameter 0.4 m, height 0.5 m and relative density 0.8 floats in water with its axis vertical. Its metacentric height is
−0.025 m
−0.017 m
0.025 m
0.075 m
Show answer & solution
Answer: (A) −0.025 m
Draught = 0.4 m; BM = D²/(16d) = 0.025 m; BG = 0.25 − 0.20 = 0.05 m; GM = 0.025 − 0.05 = −0.025 m (unstable).
Question 28
A block floats at the interface of oil lying over water, partly immersed in each liquid. The total buoyant force on the block equals
the weight of water displaced only
the weight of oil displaced only
the sum of the weights of oil and water displaced
the difference of the weights of oil and water displaced
Show answer & solution
Answer: (C) the sum of the weights of oil and water displaced
Each liquid exerts buoyancy equal to the weight of the portion it displaces; these add up to the weight of the block.
Question 29
A rectangular pontoon 8 m long and 4 m wide has a mass of 12 tonnes. Its draught in fresh water is
0.094 m
0.188 m
0.250 m
0.375 m
Show answer & solution
Answer: (D) 0.375 m
Draught = mass/(ρ × plan area) = 12000/(1000 × 32) = 0.375 m.
Question 30
The centre of buoyancy of a floating body coincides with
the centre of gravity of the whole body
the centroid of the displaced volume of liquid
the centroid of the waterplane area
the metacentre of the body
Show answer & solution
Answer: (B) the centroid of the displaced volume of liquid
The buoyant force acts through the centroid of the volume of liquid displaced by the body.
More Civil Engineering Hydraulics & Fluid Mechanics practice