A rectangular channel of the most efficient section has a cross-sectional area of 18 m². The depth of flow is
Show answer & solution
Answer: (A) 3.00 m
For the best rectangle b = 2y, so A = 2y² = 18 gives y = 3 m (b = 6 m).
Civil Engineering · Hydraulics & Fluid Mechanics
30 questions, each with the answer and a worked solution. Notes on units and constants are at the top.
Practice interactively and track your score →SI units throughout. Take g = 9.81 m/s² and the density of water as 1000 kg/m³ wherever a value is needed.
A rectangular channel of the most efficient section has a cross-sectional area of 18 m². The depth of flow is
Answer: (A) 3.00 m
For the best rectangle b = 2y, so A = 2y² = 18 gives y = 3 m (b = 6 m).
In a rectangular channel carrying a discharge q per unit width, the critical depth is given by
Answer: (A) (q²/g)^(1/3)
At critical flow Fr = 1, i.e. q²/(g y³) = 1, so yc = (q²/g)^(1/3).
In Buckingham's π method the repeating variables selected must
Answer: (A) together contain all fundamental dimensions without forming a dimensionless group
The repeating set must collectively cover M, L and T and be dimensionally independent; the dependent variable should be kept out so it appears in one π term only.
A trapezoidal channel with side walls inclined at 60° to the horizontal is designed as the most economical section for a flow depth of 3 m. The bottom width is nearly
Answer: (B) 3.46 m
For the best trapezoid with 60° sides the section is half a regular hexagon, so b = 2y tan 30° = 2 × 3 × 0.577 ≈ 3.46 m.
At critical flow in a rectangular channel, the velocity head V²/2g equals
Answer: (A) half of the critical depth
At critical flow V² = g yc, so V²/2g = yc/2 and Emin = yc + yc/2 = 1.5 yc.
A rectangular channel 4 m wide carries water at a depth of 1.5 m. With Manning's n = 0.015 and bed slope 0.0004, the discharge under uniform flow is nearly
Answer: (B) 7.22 m³/s
A = 6 m², P = 4 + 3 = 7 m, R = 0.857 m; Q = (A/n)R^(2/3)S^(1/2) = (6/0.015)(0.902)(0.02) ≈ 7.22 m³/s.
For a given discharge, bed slope and channel section, increasing Manning's roughness coefficient n will cause the normal depth to
Answer: (C) increase
Q = (A/n)R^(2/3)S^(1/2); a larger n lowers conveyance at a given depth, so a greater depth is needed to pass the same Q.
Five variables describing a flow phenomenon involve the three fundamental dimensions M, L and T. According to the Buckingham π theorem, the number of independent dimensionless π terms is
Answer: (A) 2
Number of π terms = n − m = 5 − 3 = 2.
The most economical triangular channel section with equal side slopes has
Answer: (C) side slopes at 45° to the horizontal, giving a right-angled apex
Minimising the perimeter for a given area gives z = 1 (slopes 1H:1V), so each side is inclined at 45° and the apex angle is 90°.
An M3 profile on a mild slope is typically found
Answer: (B) just downstream of a sluice gate, where the depth is below the critical depth
M3 has y < yc < yn; the supercritical flow from a gate slowly deepens until it is terminated by a hydraulic jump.
Froude similarity is adopted for models of spillways because
Answer: (B) gravity is the dominant force governing the flow over the crest
Spillway flow is a free-surface flow driven by gravity, so the Froude number V/√(gL) is equated between model and prototype.
In a free vortex the tangential velocity at a radius of 2 m is 1 m/s. The tangential velocity at a radius of 0.5 m is
Answer: (D) 4.00 m/s
For a free vortex v·r is constant, so v = (1 × 2)/0.5 = 4 m/s.
A rectangular channel 4 m wide carries 12 m³/s. The critical depth of flow is nearly
Answer: (C) 0.97 m
q = 12/4 = 3 m²/s; yc = (q²/g)^(1/3) = (9/9.81)^(1/3) ≈ 0.97 m.
In the expression Fr = V/√(gA/T) for a channel of arbitrary cross-section, T denotes the
Answer: (D) top width of the water surface
The hydraulic depth is D = A/T with T the surface width; Fr = 1 when V = √(gD).
In an open channel the Chezy constant is 50 m^(1/2)/s, the hydraulic radius is 1.2 m and the bed slope is 1 in 2500. The mean velocity of uniform flow is
Answer: (C) 1.10 m/s
V = C√(RS) = 50 × √(1.2 × 0.0004) = 50 × 0.0219 ≈ 1.10 m/s.
Alternate depths in open channel flow are two depths that have
Answer: (A) the same specific energy for the same discharge
On the specific energy curve any E greater than Emin is shared by one subcritical and one supercritical depth, the alternate depths; equal specific force defines sequent depths.
Water flows at a mean velocity of 8 m/s and a depth of 2 m in a wide rectangular channel. The Froude number of the flow is nearly
Answer: (D) 1.81
Fr = V/√(gy) = 8/√(9.81 × 2) = 8/4.43 ≈ 1.81, so the flow is supercritical.
The depths before and after a hydraulic jump in a rectangular channel are 0.5 m and 2.0 m. The head loss in the jump is
Answer: (B) 0.84 m
ΔE = (y2 − y1)³/(4 y1 y2) = (1.5)³/(4 × 0.5 × 2.0) = 3.375/4 ≈ 0.84 m.
In a very wide rectangular channel, the hydraulic radius is approximately equal to
Answer: (B) the flow depth
R = by/(b + 2y) → y as b ≫ y, so the hydraulic radius approaches the flow depth.
A ship model is tested at a scale of 1:16 under Froude similarity. A model speed of 1.5 m/s corresponds to a prototype speed of
Answer: (B) 6.00 m/s
Vr = √Lr = 4, so Vp = 1.5 × 4 = 6 m/s.
Equating the Chezy and Manning formulas, the Chezy coefficient C can be written as
Answer: (D) C = R^(1/6)/n
Manning gives V = (1/n)R^(2/3)S^(1/2) and Chezy gives V = C R^(1/2)S^(1/2), so C = R^(1/6)/n.
A 1:5 scale model of a pipe bend is tested with the same fluid as the prototype. For Reynolds similarity the model velocity must be
Answer: (D) 5 times the prototype velocity
With the same ν, VmLm = VpLp, so Vm = Vp(Lp/Lm) = 5Vp.
In gradually varied flow, an M1 profile is characterised by
Answer: (A) y > yn > yc, as in the backwater upstream of a weir on a mild slope
M1 occurs on a mild slope where the depth exceeds both normal and critical depth, typically as backwater behind a control such as a dam or weir.
A spillway model is built to a geometric scale of 1:25 and operated with Froude similarity. A model discharge of 0.2 m³/s corresponds to a prototype discharge of
Answer: (D) 625 m³/s
Qr = Lr^2.5, so Qp = 0.2 × 25^2.5 = 0.2 × 3125 = 625 m³/s.
Which range of upstream Froude number produces a steady, well-balanced hydraulic jump with the best energy dissipation?
Answer: (D) 4.5 to 9.0
Fr1 between about 4.5 and 9 gives a stable, well-formed jump dissipating roughly 45–70% of the energy; lower values give undular, weak or oscillating jumps.
The Weber number is the ratio of
Answer: (C) inertia force to surface tension force
We = ρV²L/σ, which compares inertia with surface tension; it governs capillary waves, small weirs and droplet flow.
The Manning roughness coefficient n for a smooth, well-finished concrete-lined channel is typically about
Answer: (A) 0.013
Smooth concrete linings have n of roughly 0.012–0.015; earth and vegetated channels have much higher values.
Which statement correctly describes an S2 profile in gradually varied flow?
Answer: (D) It lies between the critical and normal depths on a steep slope and is a drawdown curve
On a steep slope (yn < yc), the S2 curve has yc > y > yn and the depth falls toward normal depth.
Water enters a hydraulic jump in a wide rectangular channel at a depth of 0.4 m and a velocity of 6 m/s. The sequent (conjugate) depth is nearly
Answer: (C) 1.53 m
Fr1 = 6/√(9.81 × 0.4) = 3.03; y2 = (y1/2)[√(1 + 8Fr1²) − 1] = 0.2 × (8.57 − 1) ≈ 1.53 m.
In a free vortex flow, the total energy per unit weight of the fluid
Answer: (C) is the same at all radii, since the flow is irrotational
A free vortex is irrotational with v·r = constant, so Bernoulli's constant is the same across all streamlines.