Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Fluid Mechanics: Questions 51–100

Civil Engineering · Hydraulics & Fluid Mechanics

50 questions, each with the answer and a worked solution. Sections: Hydrostatic Pressure & Manometry (5), Buoyancy & Floatation (10) and Fluid Kinematics & Dynamics (35).

Practice interactively and track your score →

Hydrostatic Pressure & Manometry

Question 1

Archimedes' principle states that a body immersed in a fluid experiences an upward buoyant force equal to the

  1. weight of the body itself
  2. weight of the fluid displaced by the body
  3. volume of the body
  4. pressure at the bottom of the body
Show answer & solution

Answer: (B) weight of the fluid displaced by the body

Archimedes' principle: buoyant force equals the weight of fluid displaced by the submerged body.

Question 2

The point through which the buoyant force acts on a submerged or floating body is called the

  1. center of gravity
  2. center of buoyancy, i.e. the centroid of the displaced fluid volume
  3. metacenter
  4. center of pressure
Show answer & solution

Answer: (B) center of buoyancy, i.e. the centroid of the displaced fluid volume

The center of buoyancy is the centroid of the volume of fluid displaced by the body.

Question 3

For a body totally immersed in a fluid, stability depends on the relative position of its center of buoyancy and its

  1. metacenter, which coincides with the center of buoyancy for a fully submerged body
  2. center of gravity directly, since the metacenter coincides with the center of buoyancy
  3. center of pressure
  4. waterline
Show answer & solution

Answer: (B) center of gravity directly, since the metacenter coincides with the center of buoyancy

For a fully submerged body, the metacenter and center of buoyancy coincide, so stability depends directly on center of gravity vs. center of buoyancy.

Question 4

A submarine, when fully submerged, achieves stable equilibrium mainly by ensuring its center of gravity is

  1. above the center of buoyancy
  2. below the center of buoyancy
  3. exactly coincident with the center of buoyancy
  4. irrelevant to stability
Show answer & solution

Answer: (B) below the center of buoyancy

A submerged body is stable when its center of gravity lies below its center of buoyancy.

Question 5

A "drowned" or submerged weir is one in which

  1. the downstream water level is below the crest of the weir
  2. the downstream water level is above the crest of the weir, affecting the discharge
  3. there is no flow over the weir
  4. the weir has no crest at all
Show answer & solution

Answer: (B) the downstream water level is above the crest of the weir, affecting the discharge

A drowned weir has its downstream water level above the crest, which reduces the effective head and requires a modified discharge formula.

Buoyancy & Floatation

Question 6

A body floats in a fluid when its weight is

  1. greater than the buoyant force at full submersion
  2. equal to the buoyant force of the fluid it displaces
  3. less than the buoyant force at any submersion
  4. equal to zero
Show answer & solution

Answer: (B) equal to the buoyant force of the fluid it displaces

Flotation equilibrium requires the body's weight to exactly balance the buoyant force of the displaced fluid.

Question 7

The metacenter of a floating body is defined as the point of intersection of the

  1. vertical line through the center of buoyancy in the tilted position, with the original vertical line through the center of buoyancy
  2. center of gravity and center of buoyancy in the upright position only
  3. waterline and the hull
  4. keel and the deck
Show answer & solution

Answer: (A) vertical line through the center of buoyancy in the tilted position, with the original vertical line through the center of buoyancy

The metacenter is found geometrically from how the line of buoyant force shifts as the body is slightly tilted.

Question 8

The distance between the metacenter and the center of gravity of a floating body is called the

  1. metacentric radius
  2. metacentric height
  3. center of buoyancy
  4. freeboard
Show answer & solution

Answer: (B) metacentric height

Metacentric height (GM) is the key stability parameter for a floating body.

Question 9

A floating body is said to be in stable equilibrium if its metacenter lies

  1. below its center of gravity
  2. above its center of gravity
  3. exactly at its center of gravity
  4. at its center of buoyancy
Show answer & solution

Answer: (B) above its center of gravity

A metacenter above the center of gravity produces a righting moment when the body is tilted, giving stability.

Question 10

A floating body is said to be in unstable equilibrium if its metacenter lies

  1. above its center of gravity
  2. below its center of gravity
  3. exactly at its center of gravity
  4. at the waterline
Show answer & solution

Answer: (B) below its center of gravity

A metacenter below the center of gravity produces an overturning moment when tilted, causing instability.

Question 11

A floating body is in neutral equilibrium if its metacenter

  1. lies above its center of gravity
  2. lies below its center of gravity
  3. coincides with its center of gravity
  4. does not exist
Show answer & solution

Answer: (C) coincides with its center of gravity

When metacenter and center of gravity coincide, there is neither a righting nor overturning tendency.

Question 12

A larger metacentric height in a ship generally provides

  1. less stability but a smoother, slower roll
  2. greater stability but a faster, less comfortable roll
  3. no effect on stability
  4. reduced buoyancy
Show answer & solution

Answer: (B) greater stability but a faster, less comfortable roll

A larger GM increases the righting moment (more stable) but also increases the natural rolling frequency, giving a stiffer, quicker roll.

Question 13

The experimental determination of the metacentric height of a floating vessel is commonly done using a

  1. hydrometer test
  2. inclining (heeling) experiment, using a known shifted weight and the resulting angle of tilt
  3. venturimeter
  4. pitot tube test
Show answer & solution

Answer: (B) inclining (heeling) experiment, using a known shifted weight and the resulting angle of tilt

The inclining experiment measures the tilt angle from a known moment to back-calculate GM.

Question 14

If the weight of a floating body exceeds the maximum possible buoyant force (at full submersion), the body will

  1. float partially submerged
  2. sink
  3. remain at the surface regardless
  4. rise out of the liquid entirely
Show answer & solution

Answer: (B) sink

If even full submersion cannot generate enough buoyant force to balance the weight, the body sinks.

Question 15

The metacentric radius (BM) of a floating body is given by the ratio of the

  1. moment of inertia of the waterline plane about its longitudinal axis, to the volume of fluid displaced
  2. weight of the body to the volume displaced
  3. center of gravity to center of buoyancy distance
  4. total depth to the beam of the vessel
Show answer & solution

Answer: (A) moment of inertia of the waterline plane about its longitudinal axis, to the volume of fluid displaced

BM = I (moment of inertia of the waterplane area) / V (volume of fluid displaced).

Fluid Kinematics & Dynamics

Question 16

Fluid kinematics deals with the study of fluid motion

  1. together with the forces causing it
  2. without considering the forces causing it, focusing on velocity and acceleration
  3. only for static fluids
  4. only for compressible fluids
Show answer & solution

Answer: (B) without considering the forces causing it, focusing on velocity and acceleration

Kinematics describes motion geometrically, independent of the forces producing it.

Question 17

A streamline is defined as an imaginary line such that

  1. the tangent at any point gives the direction of the velocity at that point
  2. it always represents the actual path of a fluid particle over time, even in unsteady flow
  3. fluid crosses it freely
  4. it always coincides with a solid boundary
Show answer & solution

Answer: (A) the tangent at any point gives the direction of the velocity at that point

A streamline is, by definition, everywhere tangent to the local velocity vector at a given instant.

Question 18

Laminar flow is characterized by fluid particles moving

  1. in a random, chaotic manner
  2. in smooth, parallel layers with no mixing between layers
  3. always at very high velocity
  4. only in open channels
Show answer & solution

Answer: (B) in smooth, parallel layers with no mixing between layers

Laminar flow is orderly, with fluid moving in distinct, non-mixing layers.

Question 19

Turbulent flow is characterized by

  1. smooth, orderly, parallel motion of fluid particles
  2. irregular, chaotic fluctuations and mixing of fluid particles
  3. zero velocity
  4. constant velocity throughout the cross-section
Show answer & solution

Answer: (B) irregular, chaotic fluctuations and mixing of fluid particles

Turbulence involves random velocity fluctuations and active mixing across the flow.

Question 20

The continuity equation for a one-dimensional, steady, incompressible flow is expressed as

  1. A1V1 = A2V2
  2. P1 = P2
  3. A1 + A2 = constant
  4. V1 = V2 always
Show answer & solution

Answer: (A) A1V1 = A2V2

Mass conservation for incompressible flow requires the volumetric flow rate (AV) to be constant along a streamtube.

Question 21

The continuity equation is fundamentally a statement of the principle of conservation of

  1. energy
  2. mass
  3. momentum
  4. force
Show answer & solution

Answer: (B) mass

Continuity expresses that mass entering a control volume equals mass leaving it, under steady conditions.

Question 22

The velocity potential function exists only for

  1. rotational flow
  2. irrotational flow
  3. turbulent flow only
  4. compressible flow only
Show answer & solution

Answer: (B) irrotational flow

A velocity potential can be defined only when the flow is irrotational.

Question 23

The stream function is a mathematical tool used to describe

  1. two-dimensional (or axisymmetric) flow, automatically satisfying the continuity equation
  2. only three-dimensional compressible flow
  3. only static fluids
  4. only turbulent flow
Show answer & solution

Answer: (A) two-dimensional (or axisymmetric) flow, automatically satisfying the continuity equation

The stream function is defined for 2D (or axisymmetric) flow and automatically satisfies continuity.

Question 24

Equipotential lines and streamlines in a flow net, for irrotational flow, generally intersect at

  1. 0° (parallel to each other)
  2. 90° (orthogonal to each other)
  3. 45°
  4. an arbitrary, unrelated angle
Show answer & solution

Answer: (B) 90° (orthogonal to each other)

For irrotational flow, streamlines and equipotential lines form an orthogonal grid.

Question 25

A flow net is a graphical representation used to study

  1. streamlines and equipotential lines together, for two-dimensional irrotational flow
  2. only pressure variation with depth
  3. only viscosity effects
  4. only turbulence intensity
Show answer & solution

Answer: (A) streamlines and equipotential lines together, for two-dimensional irrotational flow

A flow net visualizes the orthogonal grid of streamlines and equipotential lines for 2D irrotational flow analysis.

Question 26

The acceleration of a fluid particle in general (unsteady, non-uniform) flow consists of

  1. only a local (temporal) component
  2. only a convective (spatial) component
  3. both local and convective components
  4. neither component, since acceleration is always zero in fluids
Show answer & solution

Answer: (C) both local and convective components

Total (material) acceleration in general flow includes both the local (time-varying) and convective (position-varying) parts.

Question 27

Bernoulli's equation is derived from Euler's equation by integrating along a

  1. streamline, for steady, incompressible, and inviscid (frictionless) flow
  2. random path, regardless of flow conditions
  3. a closed loop only
  4. any arbitrary curve, without restriction
Show answer & solution

Answer: (A) streamline, for steady, incompressible, and inviscid (frictionless) flow

Bernoulli's equation results from integrating Euler's equation along a streamline under these specific assumptions.

Question 28

Bernoulli's equation expresses the conservation of

  1. mass
  2. total mechanical energy per unit weight along a streamline (pressure, kinetic, and potential energy heads)
  3. momentum only
  4. force only
Show answer & solution

Answer: (B) total mechanical energy per unit weight along a streamline (pressure, kinetic, and potential energy heads)

Bernoulli's principle is an energy-conservation statement combining pressure, velocity, and elevation heads.

Question 29

Bernoulli's equation, in terms of head, is expressed as

  1. p/ρg + V²/2g + z = constant
  2. p + V + z = constant
  3. p/ρg × V²/2g × z = constant
  4. p - V - z = constant
Show answer & solution

Answer: (A) p/ρg + V²/2g + z = constant

This is the standard head form of Bernoulli's equation, summing pressure, velocity, and elevation heads.

Question 30

The term p/ρg in Bernoulli's equation represents the

  1. velocity head
  2. pressure head
  3. datum (elevation) head
  4. total head
Show answer & solution

Answer: (B) pressure head

p/ρg is the pressure head term in Bernoulli's equation.

Question 31

The term V²/2g in Bernoulli's equation represents the

  1. pressure head
  2. velocity (kinetic) head
  3. datum head
  4. total head
Show answer & solution

Answer: (B) velocity (kinetic) head

V²/2g is the velocity (kinetic energy) head term in Bernoulli's equation.

Question 32

The assumptions of Bernoulli's equation include that the fluid is

  1. compressible and viscous
  2. ideal (inviscid), incompressible, and the flow is steady along a streamline
  3. always turbulent
  4. always at rest
Show answer & solution

Answer: (B) ideal (inviscid), incompressible, and the flow is steady along a streamline

Bernoulli's equation strictly applies only under these idealized assumptions.

Question 33

In practice, a correction factor (coefficient of discharge or loss term) is applied to Bernoulli's equation for real fluids mainly to account for

  1. gravitational effects only
  2. energy losses due to friction and viscosity, absent in the ideal assumption
  3. changes in temperature only
  4. changes in density only
Show answer & solution

Answer: (B) energy losses due to friction and viscosity, absent in the ideal assumption

Real fluids experience frictional and viscous losses that the ideal Bernoulli equation does not capture, requiring empirical correction.

Question 34

The momentum equation for fluid flow is derived from Newton's second law and states that the net force on a fluid mass equals the

  1. rate of change of momentum of the fluid
  2. rate of change of pressure
  3. rate of change of kinetic energy
  4. rate of change of density
Show answer & solution

Answer: (A) rate of change of momentum of the fluid

The momentum equation is a direct application of F = rate of change of momentum, to a flowing fluid.

Question 35

The momentum equation is particularly useful for determining

  1. forces exerted by a flowing fluid on structures like pipe bends, nozzles, and vanes
  2. viscosity of the fluid
  3. surface tension effects only
  4. capillary rise only
Show answer & solution

Answer: (A) forces exerted by a flowing fluid on structures like pipe bends, nozzles, and vanes

Momentum analysis is the standard method for finding reaction forces on structures deflecting a flow.

Question 36

A venturimeter is a device based on the principle of Bernoulli's equation, used to measure

  1. pressure only
  2. the rate of flow (discharge) through a pipe
  3. viscosity
  4. density
Show answer & solution

Answer: (B) the rate of flow (discharge) through a pipe

A venturimeter converts the pressure drop at a constriction (via Bernoulli's principle) into a discharge measurement.

Question 37

In a venturimeter, the pressure difference used to calculate discharge is measured between the

  1. inlet (larger) section and the throat (constricted) section
  2. inlet and outlet sections only
  3. two ends of the diverging section
  4. atmosphere and the pipe
Show answer & solution

Answer: (A) inlet (larger) section and the throat (constricted) section

The pressure difference between the inlet and the throat, via Bernoulli's equation, gives the flow velocity and discharge.

Question 38

The coefficient of velocity (Cv) of an orifice is defined as the ratio of the

  1. actual velocity of the jet at vena contracta to the theoretical velocity
  2. theoretical velocity to actual velocity
  3. actual discharge to theoretical discharge
  4. area of jet to area of orifice
Show answer & solution

Answer: (A) actual velocity of the jet at vena contracta to the theoretical velocity

Cv = actual jet velocity / theoretical velocity (from Bernoulli's equation).

Question 39

The vena contracta is the section of a jet issuing from an orifice where the

  1. jet area is maximum
  2. jet cross-sectional area is minimum, just downstream of the orifice
  3. jet velocity is minimum
  4. jet pressure is maximum
Show answer & solution

Answer: (B) jet cross-sectional area is minimum, just downstream of the orifice

Streamline convergence causes the jet to narrow to a minimum area (the vena contracta) just past the orifice.

Question 40

Reynolds number is a dimensionless parameter used to determine whether a flow is

  1. compressible or incompressible
  2. laminar or turbulent
  3. steady or unsteady
  4. uniform or non-uniform
Show answer & solution

Answer: (B) laminar or turbulent

Reynolds number is the standard criterion distinguishing laminar from turbulent flow regimes.

Question 41

For flow through a circular pipe, the flow is generally considered laminar if the Reynolds number is

  1. less than about 2000
  2. between 2000 and 4000
  3. greater than 4000
  4. always infinite
Show answer & solution

Answer: (A) less than about 2000

Pipe flow is generally laminar below a Reynolds number of about 2000.

Question 42

For flow through a circular pipe, the flow is generally considered turbulent if the Reynolds number is

  1. less than 2000
  2. between 2000 and 4000 (transitional)
  3. greater than about 4000
  4. exactly 2000
Show answer & solution

Answer: (C) greater than about 4000

Pipe flow is generally fully turbulent above a Reynolds number of about 4000.

Question 43

For laminar flow through a circular pipe, the friction factor f is related to Reynolds number Re by

  1. f = 64/Re
  2. f = Re/64
  3. f = 16/Re
  4. f = 4/Re
Show answer & solution

Answer: (A) f = 64/Re

This is the classical laminar-flow friction factor relation, derived from the Hagen-Poiseuille solution.

Question 44

The Hagen-Poiseuille equation gives the relationship for

  1. turbulent flow through pipes
  2. laminar flow through a circular pipe, relating pressure drop to flow rate, viscosity, and pipe dimensions
  3. flow over weirs
  4. flow through open channels only
Show answer & solution

Answer: (B) laminar flow through a circular pipe, relating pressure drop to flow rate, viscosity, and pipe dimensions

Hagen-Poiseuille's equation is the exact analytical solution for fully developed laminar pipe flow.

Question 45

In laminar flow through a circular pipe, the velocity distribution across the cross-section is

  1. uniform
  2. parabolic, maximum at the center and zero at the pipe wall
  3. linear
  4. constant at all radii
Show answer & solution

Answer: (B) parabolic, maximum at the center and zero at the pipe wall

Laminar pipe flow has a parabolic velocity profile, per the Hagen-Poiseuille solution.

Question 46

The average velocity in laminar pipe flow is related to the maximum (centerline) velocity by

  1. average = maximum velocity
  2. average = half the maximum velocity
  3. average = twice the maximum velocity
  4. average = one-fourth the maximum velocity
Show answer & solution

Answer: (B) average = half the maximum velocity

For the parabolic laminar profile, the average velocity is exactly half the maximum (centerline) velocity.

Question 47

Loss of head due to sudden enlargement in a pipe is generally calculated using the

  1. Darcy-Weisbach equation directly
  2. Borda-Carnot equation, based on the momentum principle
  3. Bernoulli's equation alone, without any loss
  4. Manning's equation
Show answer & solution

Answer: (B) Borda-Carnot equation, based on the momentum principle

Sudden enlargement loss is derived from momentum and continuity, known as the Borda-Carnot loss formula.

Question 48

When several pipes of different diameters and lengths are connected end to end (in series), the total discharge through each pipe is

  1. different for each pipe
  2. the same throughout, while head losses add up
  3. always zero
  4. proportional to pipe diameter only
Show answer & solution

Answer: (B) the same throughout, while head losses add up

Series pipes carry the same continuity-driven discharge, while individual head losses sum to give the total loss.

Question 49

Water hammer in a pipeline is a phenomenon caused by

  1. steady, uniform flow
  2. the sudden closure (or opening) of a valve, causing a rapid change in velocity and a resulting pressure surge
  3. low fluid viscosity
  4. high atmospheric pressure
Show answer & solution

Answer: (B) the sudden closure (or opening) of a valve, causing a rapid change in velocity and a resulting pressure surge

Water hammer results from the rapid deceleration/acceleration of fluid, converting kinetic energy into a pressure wave.

Question 50

Kinematic similarity between a model and its prototype requires that

  1. corresponding linear dimensions are proportional
  2. the ratios of corresponding velocities and accelerations at corresponding points and times are the same
  3. only the forces are proportional
  4. only the pressures are equal
Show answer & solution

Answer: (B) the ratios of corresponding velocities and accelerations at corresponding points and times are the same

Kinematic similarity concerns matching the pattern of motion (velocities and accelerations), not just geometry.

Practice these 50 questions interactively →