Density of a fluid is defined as its
Show answer & solution
Answer: (B) mass per unit volume
Density (mass density) = mass / volume.
Civil Engineering · Hydraulics & Fluid Mechanics
50 questions, each with the answer and a worked solution. Sections: Fluid Properties (36) and Hydrostatic Pressure & Manometry (14).
Practice interactively and track your score →Density of a fluid is defined as its
Answer: (B) mass per unit volume
Density (mass density) = mass / volume.
Specific weight of a fluid is defined as its
Answer: (B) weight per unit volume
Specific weight = weight / volume = ρg.
Specific gravity of a fluid is the ratio of its density to the density of
Answer: (C) water at 4°C
Specific gravity is conventionally referenced to water at 4°C, its maximum-density state.
The SI unit of density is
Answer: (B) kg/m³
Density has units of mass/volume, i.e. kg/m³.
The SI unit of specific weight is
Answer: (B) N/m³
Specific weight is a force per unit volume, i.e. N/m³.
Viscosity of a fluid is a measure of its
Answer: (B) resistance to relative motion between adjacent fluid layers (internal friction)
Viscosity quantifies internal friction resisting relative sliding between fluid layers.
Newton's law of viscosity states that shear stress is
Answer: (B) directly proportional to the velocity gradient (rate of shear strain)
τ = μ(du/dy): shear stress is directly proportional to the velocity gradient.
The SI unit of dynamic (absolute) viscosity is
Answer: (B) N-s/m² (Pa·s)
Dynamic viscosity has units of Pa·s, equivalently N-s/m².
Kinematic viscosity is defined as the ratio of
Answer: (A) dynamic viscosity to density
Kinematic viscosity ν = μ/ρ.
The SI unit of kinematic viscosity is
Answer: (B) m²/s
Kinematic viscosity has units of area/time, i.e. m²/s.
A fluid that obeys Newton's law of viscosity (shear stress directly proportional to velocity gradient) is called a
Answer: (B) Newtonian fluid
Fluids following the linear τ ∝ (du/dy) relationship are termed Newtonian fluids.
An ideal fluid is one that is
Answer: (A) incompressible and has zero viscosity
The idealized fluid model assumes zero viscosity and incompressibility for simplified analysis.
Viscosity of a liquid, in general, with increasing temperature
Answer: (B) decreases
Liquid viscosity typically decreases as temperature rises, due to weaker intermolecular cohesion.
Viscosity of a gas, in general, with increasing temperature
Answer: (A) increases
Gas viscosity increases with temperature, since it arises mainly from molecular momentum transfer, which increases with thermal activity.
Surface tension of a liquid is due to
Answer: (B) cohesive forces between liquid molecules at the free surface
Surface tension arises from unbalanced cohesive molecular forces at the liquid's free surface.
The SI unit of surface tension is
Answer: (A) N/m
Surface tension is force per unit length, i.e. N/m.
Capillary rise or fall of a liquid in a fine tube is caused by
Answer: (B) the combined effect of surface tension and the relative magnitude of cohesive and adhesive forces
Capillarity results from the interplay between a liquid's internal cohesion and its adhesion to the tube wall, combined with surface tension.
Capillary rise occurs when the adhesive force between the liquid and the tube material is
Answer: (B) greater than the cohesive force within the liquid, as with water in a glass tube
Stronger adhesion than cohesion causes the liquid to wet and climb the tube wall, producing capillary rise.
Mercury in a glass tube shows capillary depression mainly because
Answer: (A) cohesive forces within mercury exceed the adhesive force between mercury and glass
Mercury's strong internal cohesion relative to its adhesion to glass causes it to be depressed rather than raised.
Compressibility of a fluid is the reciprocal of its
Answer: (B) bulk modulus of elasticity
Compressibility = 1/K, where K is the bulk modulus of elasticity.
Hydrostatic pressure at a depth h below the free surface of a fluid of density ρ is given by
Answer: (A) ρgh
Standard hydrostatic pressure formula, increasing linearly with depth.
Absolute pressure is related to gauge pressure and atmospheric pressure by
Answer: (B) Absolute = Gauge + Atmospheric
Absolute pressure is measured from a true vacuum, so it equals gauge pressure plus atmospheric pressure.
A pressure below atmospheric pressure is generally referred to as
Answer: (B) vacuum (or negative gauge) pressure
Pressures below atmospheric are termed vacuum or negative gauge pressures.
The pressure at the same horizontal level in a continuous, static, homogeneous fluid is
Answer: (B) the same at all points
In a connected static fluid of uniform density, pressure depends only on depth, so it is equal at any given horizontal level.
Atmospheric pressure at sea level is approximately
Answer: (A) 1.013 bar (or about 101.3 kPa)
Standard atmospheric pressure at sea level is about 101.3 kPa, or 1.013 bar.
The total hydrostatic pressure force on a submerged plane surface is given by the product of the fluid's specific weight, the area of the surface, and the
Answer: (A) depth of the centroid of the area below the free surface
Total force F = ρg × A × h_centroid, using the depth of the area's centroid.
A hydrometer is an instrument that works on the principle of
Answer: (B) Archimedes' principle, to measure the specific gravity of a liquid
A hydrometer floats at a depth governed by buoyancy, calibrated to read specific gravity directly.
In steady flow, the flow characteristics (velocity, pressure, density) at any point
Answer: (B) do not change with time
Steady flow means fixed-point flow properties remain constant over time, even though they may vary with position.
In uniform flow, the velocity of the fluid
Answer: (A) does not change with position, at a given instant, along the length of flow
Uniform flow has velocity independent of position along the flow direction, at a given instant.
Rotational flow is a type of flow in which fluid particles
Answer: (A) rotate about their own axis while moving
In rotational flow, fluid elements spin about their own axis as they translate.
Irrotational flow is a type of flow in which fluid particles
Answer: (B) move without rotating about their own axis
Irrotational flow has no local spin of fluid elements, even though the overall flow field may curve.
Euler's equation of motion for fluid flow is derived by applying Newton's second law to a fluid element, considering
Answer: (B) pressure and gravity (body) forces, for an ideal (inviscid) fluid
Euler's equation balances pressure and body (gravity) forces against fluid acceleration, neglecting viscosity.
Reynolds number is defined as the ratio of
Answer: (A) inertia force to viscous force
Re = inertia force / viscous force = ρVD/μ.
For a rectangular channel section to be most economical, the relationship between the width (b) and depth (d) is
Answer: (B) b = 2d
The most economical rectangular section requires the width to be twice the depth.
For a trapezoidal channel to be most economical, the hydraulic radius equals
Answer: (B) half the depth of flow
The most economical trapezoidal section has hydraulic radius equal to half the flow depth.
Dimensional analysis is a mathematical technique used mainly to
Answer: (B) establish relationships between physical quantities by analyzing their fundamental dimensions, reducing the number of variables in an experiment
Dimensional analysis groups variables into fewer dimensionless parameters, simplifying experimental study.
Pressure at a point in a static fluid is
Answer: (B) the same in all directions (Pascal's law)
Pascal's law establishes that static fluid pressure at a point acts equally in every direction.
Pascal's law states that pressure applied at any point in a confined, incompressible fluid is
Answer: (A) transmitted equally and undiminished in all directions
This is the basis of hydraulic systems: applied pressure is transmitted equally throughout a confined fluid.
A manometer is an instrument used to measure
Answer: (B) pressure
Manometers use a column of liquid to indicate fluid pressure.
A simple manometer, using a single column of liquid, is generally used to measure
Answer: (B) moderate pressures at a point
Simple manometers are suited to moderate pressures, since very high pressures would need impractically tall columns.
A differential manometer is used to measure
Answer: (B) the difference in pressure between two points
Differential manometers connect two points to directly indicate the pressure difference between them.
An inverted (U-tube) differential manometer is generally used when the pressure difference to be measured is
Answer: (B) very small, requiring greater sensitivity
The inverted manometer, often using a light fluid like air or oil, provides better sensitivity for small pressure differences.
A mechanical pressure gauge commonly used for measuring high fluid pressures, based on the deformation of a curved tube, is called a
Answer: (A) Bourdon gauge
The Bourdon gauge uses the elastic deformation of a curved tube under pressure to indicate the reading.
A piezometer tube is the simplest device used to measure
Answer: (B) moderate gauge pressure directly by the height of liquid column risen in a vertical tube
A piezometer is a simple open vertical tube whose liquid rise directly indicates gauge pressure.
The point of application of the total hydrostatic pressure force on a submerged surface is called the
Answer: (B) center of pressure
The center of pressure is where the resultant hydrostatic force effectively acts on the surface.
For a vertically submerged plane surface, the center of pressure lies
Answer: (B) below the centroid of the area
Since pressure increases with depth, the center of pressure is always below the centroid for a vertical surface.
For a plane surface submerged vertically with its top edge at the free surface, the center of pressure lies at a depth, from the free surface, equal to
Answer: (B) two-thirds the total depth
For this classic case (e.g. a rectangular gate with top at the surface), the center of pressure is at two-thirds the total submerged depth.
Hydrostatic pressure on a curved submerged surface is generally resolved into
Answer: (B) horizontal and vertical components, analyzed separately
Curved surfaces are typically analyzed by resolving the resultant hydrostatic force into horizontal and vertical components.
The horizontal component of the hydrostatic force on a curved submerged surface equals the
Answer: (A) total force on the vertical projection of the curved surface
The horizontal force component equals what would act on the surface's vertical projection, as a plane surface.
The vertical component of the hydrostatic force on a curved submerged surface equals the
Answer: (A) weight of the (real or imaginary) fluid volume above the curved surface, up to the free surface
The vertical force component equals the weight of the fluid volume vertically above the curved surface, up to the free surface.