An assembled product made up of veneers and adhesives is called
Show answer & solution
Answer: (C) plywood
Plywood is manufactured by bonding thin wood veneers together under heat and pressure with alternating grain directions.
Civil Engineering · Building Materials
27 questions, each with the answer and a worked solution.
Practice interactively and track your score →An assembled product made up of veneers and adhesives is called
Answer: (C) plywood
Plywood is manufactured by bonding thin wood veneers together under heat and pressure with alternating grain directions.
The central part of a tree is called
Answer: (B) pith
The pith (or medulla) is the innermost soft core around which annual rings form in tree trunks.
The defect caused by imperfect seasoning is called
Answer: (C) honeycombing
Honeycombing refers to internal stress cracking and rupturing within timber cells caused by excessively rapid or improper kiln seasoning.
The thin radial fibres extending from the pith to the cambium layer is called medullary rays.
Answer: (A) Yes
Medullary rays transfer food and nutrients radially across the growth rings from the pith outward.
Annual (growth) rings, visible in a cross-section of many timber species (particularly those from temperate climates with distinct seasons), are formed due to
Answer: (A) the difference in the rate and character of growth between the spring (early wood) and the following autumn/winter (late wood) periods each year
Rings reflect the seasonal contrast between fast, less-dense spring growth and slower, denser late-season growth.
Cross-laminating the veneers in plywood (rotating the grain direction of successive layers) provides the key advantage of
Answer: (B) giving the plywood more uniform strength properties in different directions, and improved dimensional stability, compared to solid timber (which is much weaker across the grain than along it)
Rotating grain direction balances strength across directions and improves dimensional stability compared to solid wood.
Defects in timber, such as knots, are generally caused by
Answer: (A) the base of a branch that has become embedded in the growing trunk wood over time
Knots form naturally where branch bases become embedded in the surrounding trunk wood as the tree grows.
Exogenous trees, which provide most commercial timber, are characterized by growth that occurs
Answer: (A) from the inside outward, adding new wood layers (growth rings) just beneath the bark each growing season
Exogenous trees add new wood layers beneath the bark each season, producing the familiar concentric growth rings.
French polish, a traditional finishing technique particularly for fine furniture and woodwork, is essentially a solution of
Answer: (A) shellac (a natural resin) dissolved in a suitable solvent (such as denatured alcohol/spirit), applied in multiple thin coats to build up a distinctive, deep, glossy finish
French polish is a shellac-in-alcohol solution, applied in many thin coats to build a deep, glossy finish.
Heartwood, the inner, usually darker-colored portion of a tree trunk, is generally
Answer: (B) more durable and often stronger than sapwood, though physiologically inactive (dead) tissue, and is generally the preferred portion for structural timber use
Heartwood, despite being physiologically dead tissue, is generally denser, stronger, and more decay-resistant, and preferred structurally.
Kiln seasoning of timber, compared to natural (air) seasoning, generally
Answer: (B) can achieve the desired moisture content considerably faster, using a controlled chamber with regulated temperature and humidity, though generally at higher initial cost
Kiln seasoning's controlled environment dries timber much faster than natural air seasoning, at a higher equipment/energy cost.
Knots in timber are generally considered
Answer: (B) a natural defect that can locally weaken the timber and disrupt the grain, though small, tight, sound knots may sometimes be acceptable depending on the intended use
Knots disrupt the surrounding grain and can locally weaken timber, though small sound knots are sometimes tolerated.
Natural seasoning of timber involves
Answer: (A) stacking cut timber in the open air (typically under cover from direct rain/sun) and allowing it to dry gradually through natural air circulation
Natural (air) seasoning relies on stacked, sheltered timber drying gradually through natural air circulation.
Plywood, a common engineered wood product, is manufactured by
Answer: (A) gluing together an odd number of thin wood veneers, with the grain direction of each successive layer typically rotated (often by 90 degrees) relative to the adjacent layer
Plywood's defining feature is an odd number of veneer layers glued with alternating (typically 90-degree) grain direction.
Sapwood, the outer, usually lighter-colored portion of a tree trunk's cross-section, is generally
Answer: (B) less durable (more susceptible to decay/insect attack) than the heartwood, though it is the living, physiologically active part of the trunk conducting sap
Sapwood is the living, sap-conducting outer wood, generally less durable than the older heartwood.
Seasoning of timber refers to the process of
Answer: (B) reducing the moisture content of freshly cut (green) timber to a suitable level for its intended use, thereby reducing subsequent shrinkage, warping, and improving strength/durability
Seasoning dries green timber to a suitable moisture level, reducing later shrinkage/warping and improving performance.
Shakes, another common timber defect, refer to
Answer: (A) cracks or separations that develop, generally along the grain, often due to internal stresses during growth or during the seasoning process
Shakes are grain-aligned cracks/separations arising from internal growth stresses or seasoning.
The defect caused due to over-maturity and unventilated storage of the wood during its transport is called
Answer: (C) foxiness
Foxiness is a fungal decay defect appearing as yellow or red discolored spots in over-mature timber stored with poor ventilation.
The moisture content in timber for framework should not exceed
Answer: (C) 15%
To prevent dimensional movement and fungal attack in structural frameworks, timber moisture content should be kept below 15%.
The strength of timber is maximum in the direction _____________ to the grains.
Answer: (A) parallel
Wood fibers possess maximum tensile and compressive load-bearing strength when stressed parallel to their grain orientation.
The timber whose thickness is less than 5 cm and the width exceeds 12 cm, is called a
Answer: (A) board
Timber converted into thin, wide rectangular pieces (thickness < 5 cm, width > 12 cm) is classified as a board.
The time required for air seasoning of soft wood is
Answer: (A) 15 to 30 days
Softwoods have open cellular structures allowing relatively fast natural air drying, taking roughly 15 to 30 days under favorable conditions.
The time required for seasoning of timber in kiln seasoning is
Answer: (C) 10 to 20 days
Controlled kiln seasoning accelerates moisture reduction artificially, drying timber reliably within 10 to 20 days.
The wood generally used for railway sleepers is
Answer: (D) deodar
Deodar timber is naturally durable, resilient, and resistant to moisture and insect decay, making it historically preferred for railway sleepers.
Timber preservation treatments, such as the application of creosote or certain chemical preservatives, are carried out mainly to
Answer: (B) protect the timber from decay (fungal attack), insect damage (such as termites), and, in some cases, fire, thereby extending its useful service life
Preservative treatments extend timber's service life by protecting against decay, insects, and sometimes fire.
Timber, as a building material, is essentially processed/converted
Answer: (B) wood, obtained from trees, suitable for use in construction and other applications
Timber is simply processed wood derived from trees.
Warping of timber, a defect often resulting from improper or uneven seasoning, refers to
Answer: (A) the timber becoming distorted from its original true, flat shape (e.g., twisting, bowing, or cupping)
Warping is distortion (twisting, bowing, cupping) away from the timber's original true shape, often from uneven drying.