The commonly used cement in cement paints is
Show answer & solution
Answer: (A) white cement
White cement serves as the base binder in cement paints, allowing bright, clean tinting with colored pigments.
Civil Engineering · Building Materials
26 questions, each with the answer and a worked solution.
Practice interactively and track your score →The commonly used cement in cement paints is
Answer: (A) white cement
White cement serves as the base binder in cement paints, allowing bright, clean tinting with colored pigments.
The solvent used in cement paints is
Answer: (C) water
Cement paints are water-based dry powder mixtures that are mixed and diluted with clean water before application.
A primer coat, typically applied as the first coat in a multi-coat painting system (particularly on new or bare/previously uncoated surfaces, such as bare steel or new plaster), serves mainly to
Answer: (B) improve the adhesion of subsequent coats, and in some cases provide additional protective properties (such as corrosion inhibition on steel, or sealing a porous surface), before the finish coats are applied
Primers improve adhesion for subsequent coats and sometimes add corrosion inhibition or surface sealing before finish coats.
Anti-corrosive paints, formulated specifically for application on metal (particularly ferrous/steel) surfaces, generally incorporate pigments or additives specifically intended to
Answer: (B) inhibit or slow down the corrosion process of the underlying metal, through mechanisms such as forming a protective barrier, or through active chemical inhibition/passivation of the metal surface
Anti-corrosive paints incorporate additives that inhibit corrosion, either as a barrier or through chemical passivation.
Distemper is used on
Answer: (D) plastered surfaces not exposed to weather
Distempers are water-based paints using chalk and glue binders, making them suitable only for interior plastered surfaces not exposed to weather.
Distemper, a traditional, relatively inexpensive water-based paint historically used mainly for interior wall/ceiling finishing, is generally characterized, compared to modern emulsion (latex) paints, by
Answer: (B) generally lower washability and durability, and it has been largely superseded by more modern (and generally superior) emulsion-based paints for most contemporary interior finishing work
Distemper is generally less durable and washable than modern emulsion paint, which has largely replaced it for interiors.
Emulsion (latex) paint, widely used in modern interior (and some exterior) painting, is based on a binder consisting of
Answer: (A) fine polymer (resin) particles dispersed (emulsified) in water, which coalesce to form a continuous film as the water evaporates during drying
Emulsion paint's binder is a water-based dispersion of polymer particles that coalesce into a film as water evaporates.
Enamel paint generally refers to a paint that dries (or is baked) to form a
Answer: (B) relatively hard, smooth, and typically glossy (or semi-gloss) surface finish, often valued for both its appearance and improved durability/washability
Enamel paints are prized for their hard, smooth, typically glossy finish, offering durability and washability.
Enamel paint is made by adding
Answer: (A) white lead in varnish
Enamels are formulated by combining pigments like white lead or zinc white with varnish carriers.
Linseed oil in paint is used as a
Answer: (C) carrier
Linseed oil acts as a carrier liquid that holds pigments in suspension and dries to form a protective film.
Paint, as a surface coating material, generally consists mainly of a
Answer: (A) pigment dispersed in a suitable binder (vehicle), along with a solvent (thinner) and various additives, which together provide color, protection, and a desired finish to the coated surface
Paint's essential components are pigment, binder, solvent, and additives, combined to give color, protection, and finish.
Spirit varnish consists of
Answer: (B) spirit and shellac
Spirit varnish (such as French polish) is prepared by dissolving shellac resin in methylated spirit.
The base material for distemper is
Answer: (A) chalk
Chalk (whiting) forms the primary white pigment and base material for distempers.
The binder (vehicle) component of paint is mainly responsible for
Answer: (B) forming the continuous film that binds the pigment particles together and adheres the paint to the surface once the paint has dried/cured
The binder forms the film that holds pigment together and bonds the paint to the substrate as it cures.
The chief ingredient of a paint is
Answer: (D) pigment
Pigments provide color, opacity, and protective film characteristics, forming the principal solid ingredient of paint.
The drier in an oil paint should not be more than _____________ (by volume).
Answer: (B) 10%
Metallic driers accelerate oxidation and drying, but exceeding 10% volume can embrittle and damage the paint film.
The liquid medium used in enamel paints is
Answer: (D) varnish
Enamel paints utilize varnish as their liquid vehicle, producing a hard, glossy, and durable finish.
The liquid medium used in oil paints is
Answer: (C) linseed oil
Linseed oil serves as the primary vehicle/carrier liquid in traditional oil-based paints.
The liquid part of the paint is called
Answer: (B) vehicle
The vehicle is the liquid medium that suspends pigment particles and binds them to the painted surface upon drying.
The metallic oxide used in the form of powder in a paint is called
Answer: (B) base
The base is a solid metallic oxide (like white lead or zinc oxide) forming the bulk of the paint film.
The paint which has high reflective property is
Answer: (C) bronze paint
Bronze and aluminum metallic paints provide high light and heat reflectivity due to suspended metallic flakes.
The pigment component of paint is mainly responsible for providing the paint's
Answer: (A) color and opacity (hiding power), and can also contribute to protective properties (such as corrosion inhibition, in some formulations)
Pigment provides color and opacity, and in some formulations also contributes protective functions like corrosion inhibition.
The thinner used for oil paints is
Answer: (B) turpentine
Turpentine is widely used as a solvent and thinner to reduce paint viscosity for smooth brush application.
The vehicle used in bronze paints is usually
Answer: (D) nitro-cellulose lacquer
Bronze powder paints are suspended in quick-drying nitro-cellulose lacquers or spirit varnishes to prevent metallic tarnishing.
Varnish, as distinguished from ordinary opaque (pigmented) paint, is generally
Answer: (A) a transparent (or translucent) coating, typically based on a resin dissolved in a solvent (or oil), used mainly to protect and enhance the natural appearance of a surface (such as wood grain) without concealing it with color/opacity
Varnish is transparent/translucent, protecting a surface (like wood grain) while showing it through rather than hiding it.
Which of the following paint is highly resistant to fire?
Answer: (B) Asbestos paint
Asbestos paints contain fire-retardant fibrous ingredients that offer high resistance to fire when coated on surfaces.