Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Building Materials: General Building Materials & Bitumen

Civil Engineering · Building Materials

28 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

A bitumen grade described by a lower penetration value (i.e., a harder bitumen) is generally

  1. softer and more suitable for use in very cold climates, where a softer binder is often preferred
  2. harder and generally more suitable for use in hotter climates (or for heavier traffic loading), where excessive softening/rutting of a softer bitumen would otherwise be a concern
  3. identical in every practical respect to a bitumen with a much higher penetration value
  4. not actually used in any road construction application, ever
Show answer & solution

Answer: (B) harder and generally more suitable for use in hotter climates (or for heavier traffic loading), where excessive softening/rutting of a softer bitumen would otherwise be a concern

A low-penetration (harder) bitumen resists softening/rutting better, making it suited to hot climates or heavy traffic.

Question 2

A comprehensive, practical understanding of building materials, of the type covered throughout this question bank, is important for a civil engineer mainly because it underpins

  1. informed decisions in material selection, specification, quality control/testing, and troubleshooting of material-related problems, across the full range of an engineer's typical structural design, site supervision, and construction management responsibilities
  2. absolutely nothing relevant to typical structural design, site supervision, or construction management work, being purely of abstract academic interest with zero practical engineering application whatsoever
  3. only the very narrow, specific task of ordering materials for delivery to a site, with absolutely no other broader relevance to any other aspect of an engineer's work whatsoever
  4. exclusively and only the task of painting/finishing work on a completed structure, with absolutely no relevance whatsoever to any structural design, material selection, or quality control consideration at all
Show answer & solution

Answer: (A) informed decisions in material selection, specification, quality control/testing, and troubleshooting of material-related problems, across the full range of an engineer's typical structural design, site supervision, and construction management responsibilities

Material knowledge underpins good decisions across design, specification, quality control, and troubleshooting throughout an engineer's practice.

Question 3

Acoustic (sound) insulation materials and design approaches, used to reduce the transmission of unwanted sound between spaces, generally rely, at least in part, on principles/materials such as

  1. mass (denser, heavier materials/constructions generally providing improved airborne sound insulation, all other factors being equal), together with, in many cases, absorptive/porous materials to reduce reverberation and reflected sound within a space
  2. achieving the absolute minimum possible mass for the enclosing construction, in every conceivable case, as the sole and complete design strategy for maximizing sound insulation performance
  3. having absolutely no relationship whatsoever to the mass, density, or porosity of the materials/construction being used, in any case whatsoever
  4. relying exclusively and entirely on a material's specific color, with no reference whatsoever to its mass, density, porosity, or any other relevant physical property
Show answer & solution

Answer: (A) mass (denser, heavier materials/constructions generally providing improved airborne sound insulation, all other factors being equal), together with, in many cases, absorptive/porous materials to reduce reverberation and reflected sound within a space

Sound insulation relies significantly on mass for airborne sound, combined with absorptive/porous materials for reverberation control.

Question 4

Bamboo, an increasingly discussed alternative/sustainable construction material in certain applications and regions, is valued partly for its

  1. extremely slow natural growth/renewal rate, taking many decades to reach maturity for use, comparable to (or slower than) many common hardwood timber species
  2. relatively rapid natural growth/renewal rate (compared to many hardwood timber species), combined with a notably high strength-to-weight ratio for certain structural/construction applications
  3. complete inability to be used in any structural or construction application whatsoever, being purely ornamental/decorative in every conceivable use
  4. chemical composition that is functionally identical, in every single respect, to that of ordinary structural steel
Show answer & solution

Answer: (B) relatively rapid natural growth/renewal rate (compared to many hardwood timber species), combined with a notably high strength-to-weight ratio for certain structural/construction applications

Bamboo grows much faster than typical hardwoods and offers a notably good strength-to-weight ratio for construction uses.

Question 5

Bitumen emulsion, used in some road construction/maintenance applications (particularly where heating of bitumen is undesirable or impractical), consists of

  1. fine bitumen droplets dispersed and suspended in water, with the aid of an emulsifying agent, allowing the material to be applied at (or near) ambient temperature
  2. a solid, dry powder form of bitumen, with no water content at all
  3. a purely gaseous form of bitumen, with no liquid or solid component
  4. bitumen dissolved entirely in a strong acid solution, with no water content
Show answer & solution

Answer: (A) fine bitumen droplets dispersed and suspended in water, with the aid of an emulsifying agent, allowing the material to be applied at (or near) ambient temperature

Bitumen emulsion suspends fine bitumen droplets in water, allowing cold or near-ambient application.

Question 6

Bitumen, widely used in road construction and waterproofing, is most commonly obtained, in modern practice, as a

  1. direct natural mineral, mined much like coal, with no relation to petroleum at all, in the vast majority of modern supply
  2. residue from the fractional distillation (refining) of crude petroleum, though natural bitumen deposits also exist in some locations
  3. a synthetic polymer manufactured entirely from natural gas, with no relation to petroleum residue at all
  4. byproduct of pure limestone burning, with no relation to petroleum at all
Show answer & solution

Answer: (B) residue from the fractional distillation (refining) of crude petroleum, though natural bitumen deposits also exist in some locations

Most modern bitumen comes from petroleum refining, though natural deposits do exist in some places.

Question 7

Bituminous materials, in general, are widely valued for their ability to provide, when used in pavement construction, a

  1. rigid, brittle wearing surface with essentially zero flexibility
  2. reasonably flexible, waterproof binding material for aggregate, capable of accommodating some deformation without immediately cracking, unlike a purely rigid (e.g., plain concrete) surface
  3. surface entirely incapable of bearing any traffic load whatsoever
  4. surface that must always be replaced entirely after a single year of service, in every case, regardless of design or traffic
Show answer & solution

Answer: (B) reasonably flexible, waterproof binding material for aggregate, capable of accommodating some deformation without immediately cracking, unlike a purely rigid (e.g., plain concrete) surface

Bitumen's flexibility lets flexible pavements accommodate deformation without immediate cracking, unlike rigid pavement.

Question 8

Coal tar, another bituminous material sometimes used (though less commonly than petroleum bitumen in modern road construction), is obtained mainly as a byproduct of the

  1. fractional distillation of crude petroleum, exactly as with bitumen
  2. destructive distillation (carbonization) of coal, such as in the production of coke or coal gas
  3. burning of limestone to produce lime
  4. burning of pure natural gas, with no relation to coal at all
Show answer & solution

Answer: (B) destructive distillation (carbonization) of coal, such as in the production of coke or coal gas

Coal tar is a byproduct of coal carbonization, as in coke or coal gas production, distinct from petroleum-derived bitumen.

Question 9

Cutback bitumen, another modified form of bitumen used to reduce its viscosity for easier application at lower temperatures (without necessarily heating it as much as straight-run bitumen), is produced by blending bitumen with a suitable

  1. volatile petroleum solvent (such as kerosene or naphtha), which subsequently evaporates after application, leaving the original bitumen behind
  2. large quantity of water, exactly as in a bitumen emulsion
  3. fine aggregate, exactly as in an asphalt concrete mix
  4. pure limestone powder, with no reference to any solvent
Show answer & solution

Answer: (A) volatile petroleum solvent (such as kerosene or naphtha), which subsequently evaporates after application, leaving the original bitumen behind

Cutback bitumen is thinned with a volatile solvent that evaporates after application, leaving the bitumen behind.

Question 10

Damp-proof course (DPC) materials, generally installed at the plinth level of a masonry wall (and at certain other locations) to prevent the upward capillary movement (rising damp) of moisture from the ground into the wall above, have historically and currently included materials such as

  1. bituminous felt, dense cement mortar (sometimes with a waterproofing admixture), or various plastic (polymer) sheet materials
  2. ordinary, plain, untreated fired clay brick material identical to the rest of the surrounding wall, with absolutely no distinct waterproofing property or treatment whatsoever, in every single case
  3. ordinary window glass sheet, chosen specifically and exclusively for this particular application, in preference to any more conventional DPC material
  4. a material that, in every single case without exception, must always be a specific, single, and identical color to the rest of the surrounding wall finish
Show answer & solution

Answer: (A) bituminous felt, dense cement mortar (sometimes with a waterproofing admixture), or various plastic (polymer) sheet materials

DPC materials like bituminous felt, dense waterproofed mortar, or plastic sheeting block rising damp at the plinth level.

Question 11

Durability of a building material, in a broad engineering sense, refers mainly to its ability to

  1. resist significant deterioration in its essential properties (such as strength, appearance, or serviceability) over its intended service life, when exposed to its expected service environment and normal usage conditions
  2. achieve the absolute lowest possible initial material cost, with no reference to long-term performance whatsoever
  3. achieve the maximum possible initial (very short-term) strength alone, with absolutely no reference to any long-term performance consideration
  4. match a specific decorative color scheme alone, with no reference to any structural or long-term performance consideration whatsoever
Show answer & solution

Answer: (A) resist significant deterioration in its essential properties (such as strength, appearance, or serviceability) over its intended service life, when exposed to its expected service environment and normal usage conditions

Durability concerns a material's ability to resist deterioration in its key properties over its intended service life.

Question 12

Factors that can significantly affect the durability of building materials in service generally include

  1. exposure to moisture, chemical attack (such as sulfates, chlorides, or acids), temperature variations (including freeze-thaw cycling), and various forms of physical/mechanical wear or abrasion
  2. the material's color alone, with no reference to any environmental exposure or physical/chemical mechanism whatsoever
  3. the specific brand name of the material's original manufacturer alone, with no reference to any actual environmental exposure condition
  4. the day of the week on which the material happened to be originally installed, with no reference to any actual environmental or mechanical factor at all
Show answer & solution

Answer: (A) exposure to moisture, chemical attack (such as sulfates, chlorides, or acids), temperature variations (including freeze-thaw cycling), and various forms of physical/mechanical wear or abrasion

Durability is governed by real environmental and mechanical exposure factors: moisture, chemicals, temperature cycling, and wear.

Question 13

Fire resistance of a building material or element (such as a wall, floor, or column) is generally assessed and rated based on its ability to maintain, for a specified test duration under standard fire exposure conditions, adequate

  1. structural stability (load-bearing capacity), integrity (resistance to the passage of flame/hot gases), and, in many cases, insulation (limiting the rise in temperature on the unexposed face)
  2. color consistency, with absolutely no reference to any structural, integrity, or thermal insulation performance whatsoever
  3. water absorption capacity, with absolutely no reference to fire exposure or thermal performance at all
  4. magnetic permeability, with absolutely no reference to fire resistance whatsoever
Show answer & solution

Answer: (A) structural stability (load-bearing capacity), integrity (resistance to the passage of flame/hot gases), and, in many cases, insulation (limiting the rise in temperature on the unexposed face)

Fire resistance ratings assess stability, integrity, and insulation performance together over a specified test duration.

Question 14

Gun cotton is made by saturating cotton with nitric acid.

  1. Agree
  2. Disagree
Show answer & solution

Answer: (A) Agree

Gun cotton (nitrocellulose) is produced by treating cellulose (cotton) with a mixture of nitric and sulfuric acids.

Question 15

Sealants, used in construction mainly to fill and seal joints/gaps between building elements (such as around window frames, or at movement/expansion joints), are generally valued for their ability to

  1. remain permanently rigid and completely inflexible, with absolutely no capacity to accommodate any subsequent movement of the joint whatsoever
  2. remain flexible after curing, accommodating a degree of ongoing movement (such as thermal expansion/contraction) at the joint, while maintaining a weatherproof/airtight seal
  3. dissolve completely in water shortly after application, providing no lasting seal whatsoever
  4. function exclusively as a structural adhesive, with no sealing function against water or air infiltration at all
Show answer & solution

Answer: (B) remain flexible after curing, accommodating a degree of ongoing movement (such as thermal expansion/contraction) at the joint, while maintaining a weatherproof/airtight seal

Sealants stay flexible after curing, accommodating joint movement while keeping a weatherproof, airtight seal.

Question 16

Sustainable (or "green") building materials are generally characterized, at least in part, by considerations such as

  1. minimal environmental impact over their full life cycle (including raw material extraction, manufacturing, use, and eventual disposal/recycling), often including aspects like recycled content, energy efficiency in production, or renewability of the source material
  2. achieving the maximum possible embodied energy and environmental impact throughout their entire life cycle, deliberately, as a stated design goal in every case
  3. being manufactured exclusively from entirely new (virgin), non-renewable raw materials, with recycled content deliberately and completely excluded, in every single case
  4. having absolutely no relationship whatsoever to any environmental, energy, or life-cycle consideration at all
Show answer & solution

Answer: (A) minimal environmental impact over their full life cycle (including raw material extraction, manufacturing, use, and eventual disposal/recycling), often including aspects like recycled content, energy efficiency in production, or renewability of the source material

Sustainable materials aim to minimize life-cycle environmental impact, often via recycled content or renewable sourcing.

Question 17

The ductility test on bitumen measures the

  1. distance a standard briquette sample of bitumen can be stretched, at a specified temperature and rate of pulling, before it breaks, indicating the material's ability to deform/elongate without fracturing
  2. exact chemical composition of the bitumen
  3. color of the bitumen, compared to a reference standard
  4. resistance of the bitumen to a sudden impact load
Show answer & solution

Answer: (A) distance a standard briquette sample of bitumen can be stretched, at a specified temperature and rate of pulling, before it breaks, indicating the material's ability to deform/elongate without fracturing

Ductility is measured as the stretch distance a standard bitumen briquette achieves before breaking, under set conditions.

Question 18

The flash point and fire point tests on bitumen determine the temperatures at which the bitumen's vapors will

  1. momentarily flash/ignite when exposed to an open flame (flash point), and sustain continuous burning for a specified minimum duration (fire point), important mainly for safe handling during heating
  2. permanently solidify into a hard, brittle mass
  3. turn a distinctly different color, unrelated to any flammability consideration
  4. become completely soluble in water, with no reference to any flammability consideration
Show answer & solution

Answer: (A) momentarily flash/ignite when exposed to an open flame (flash point), and sustain continuous burning for a specified minimum duration (fire point), important mainly for safe handling during heating

Flash and fire point tests assess flammability temperatures, crucial for safe heating and handling of bitumen.

Question 19

The most powerful explosive used in blasting is

  1. blasting powder
  2. dynamite
  3. gun cotton
  4. cordite
Show answer & solution

Answer: (B) dynamite

Dynamite, containing nitroglycerin, is significantly more powerful than traditional blasting powders and is widely used for heavy rock excavation.

Question 20

The penetration test on bitumen, a standard consistency test, measures the

  1. depth (in tenths of a millimeter) to which a standard needle, under a specified load, penetrates a sample of bitumen at a specified temperature and time
  2. exact chemical composition of the bitumen sample
  3. color of the bitumen sample, compared to a reference standard
  4. the bitumen's resistance to a sudden impact load
Show answer & solution

Answer: (A) depth (in tenths of a millimeter) to which a standard needle, under a specified load, penetrates a sample of bitumen at a specified temperature and time

The penetration test standardizes bitumen grading by measuring needle penetration depth under fixed conditions.

Question 21

The softening point test on bitumen (commonly using the ring and ball apparatus) determines the

  1. temperature at which the bitumen softens sufficiently to allow a standard steel ball to sink through a ring of the bitumen sample by a specified distance, under specified test conditions
  2. exact chemical composition of the bitumen
  3. color of the bitumen, compared to a reference standard
  4. the bitumen's resistance to sudden impact loading
Show answer & solution

Answer: (A) temperature at which the bitumen softens sufficiently to allow a standard steel ball to sink through a ring of the bitumen sample by a specified distance, under specified test conditions

The ring-and-ball test finds the temperature at which bitumen softens enough for a standard steel ball to sink a fixed distance.

Question 22

Thermal insulation materials, used in building construction (such as within wall cavities or roof spaces) mainly to reduce heat transfer/loss, include materials such as

  1. mineral wool (glass wool/rock wool), expanded polystyrene (EPS), and similar low-thermal-conductivity materials, generally relying substantially on trapped air (or another gas) within their structure to achieve their insulating effect
  2. solid, dense structural steel plate, chosen specifically and exclusively for its comparatively very high thermal conductivity in every single application
  3. solid, dense natural stone or plain concrete, chosen specifically and exclusively for its comparatively very high thermal conductivity in every single application
  4. pure, solid (non-porous) glass, with absolutely no air content or cellular/fibrous structure whatsoever, in every single formulation
Show answer & solution

Answer: (A) mineral wool (glass wool/rock wool), expanded polystyrene (EPS), and similar low-thermal-conductivity materials, generally relying substantially on trapped air (or another gas) within their structure to achieve their insulating effect

Insulation materials like mineral wool and EPS trap air within their structure to achieve low thermal conductivity.

Question 23

Waterproofing membranes, used in construction (such as beneath a roof covering, or around a below-grade basement structure) to prevent water ingress, are generally made from materials such as

  1. modified bituminous sheet materials, or various synthetic polymer sheet/liquid-applied membrane systems, chosen mainly for their low permeability to water
  2. ordinary, untreated fired clay brick material, chosen specifically and exclusively for this particular waterproofing application, in preference to any other more conventional waterproofing membrane material
  3. ordinary plain (untreated) paper, with absolutely no other treatment, coating, or lamination whatsoever, in every single application
  4. a material that, by definition and in every conceivable case, must always be fully and completely transparent, with no exception whatsoever
Show answer & solution

Answer: (A) modified bituminous sheet materials, or various synthetic polymer sheet/liquid-applied membrane systems, chosen mainly for their low permeability to water

Standard waterproofing membranes use bituminous sheets or synthetic polymer systems specifically chosen for low water permeability.

Question 24

When selecting building materials for a specific project (such as a public building in Balochistan, Pakistan), an engineer must generally weigh several practical, often competing factors, most importantly including

  1. local availability and cost of the material, its suitability/durability for the specific local climate and exposure conditions, its structural/functional performance requirements, and relevant code/specification compliance
  2. the material's color alone, deliberately and completely disregarding any other structural, durability, cost, availability, or code compliance consideration whatsoever
  3. the specific personal preference of a single individual site laborer alone, deliberately and completely disregarding any engineering, structural, durability, or code compliance consideration whatsoever
  4. whichever material happens to have the longest possible written name or most complex chemical formula, deliberately and completely disregarding any actual engineering suitability consideration whatsoever
Show answer & solution

Answer: (A) local availability and cost of the material, its suitability/durability for the specific local climate and exposure conditions, its structural/functional performance requirements, and relevant code/specification compliance

Practical material selection balances local availability/cost, climate suitability, performance needs, and code compliance.

Question 25

Epoxy adhesives, a common category of structural adhesive used in some construction applications (such as bonding new concrete to old, or certain structural strengthening/repair work), are generally characterized by

  1. very poor bond strength, well below that of most other common adhesives, in virtually every application
  2. generally high bond strength and good durability (once fully cured), along with good resistance to many chemicals, though typically at a higher material cost compared to some simpler adhesive types
  3. an inability to bond to concrete, steel, or most other common construction materials whatsoever
  4. an instantaneous, immediate final cure, occurring within only a few seconds of mixing, in every case, with no working time available at all
Show answer & solution

Answer: (B) generally high bond strength and good durability (once fully cured), along with good resistance to many chemicals, though typically at a higher material cost compared to some simpler adhesive types

Epoxies offer high bond strength, durability, and chemical resistance once cured, generally at a higher cost.

Question 26

Reinforced concrete, compared to unprotected exposed structural steel, generally offers, without requiring significant additional fire protection measures in many typical applications

  1. considerably poorer inherent fire resistance, due to the concrete providing no meaningful thermal protection to the embedded steel reinforcement whatsoever
  2. generally better inherent fire resistance (for typical member sizes/cover), since the surrounding concrete provides significant thermal insulation to the embedded steel reinforcement, delaying its temperature rise during a fire, compared to bare exposed structural steel
  3. fire resistance performance that is, in every conceivable case, completely identical to unprotected exposed structural steel
  4. an complete inability to be used in any building where fire resistance is a design consideration whatsoever
Show answer & solution

Answer: (B) generally better inherent fire resistance (for typical member sizes/cover), since the surrounding concrete provides significant thermal insulation to the embedded steel reinforcement, delaying its temperature rise during a fire, compared to bare exposed structural steel

Concrete's mass insulates embedded reinforcement, generally giving RC better inherent fire resistance than bare steel.

Question 27

Testing of building materials (such as bricks, cement, aggregate, or steel) against relevant national or international standard specifications, before or during their use on a construction project, is important mainly because it helps to

  1. verify that the materials meet the minimum quality and performance requirements assumed in the structural design, helping to ensure the safety, durability, and adequate performance of the completed structure
  2. increase the project's overall cost and construction schedule duration alone, with absolutely no corresponding benefit whatsoever to the safety, durability, or performance of the completed structure
  3. have absolutely no relationship whatsoever to the safety, durability, or performance of the completed structure, in any case whatsoever
  4. replace the need for any subsequent structural design calculation whatsoever, in every single case without exception
Show answer & solution

Answer: (A) verify that the materials meet the minimum quality and performance requirements assumed in the structural design, helping to ensure the safety, durability, and adequate performance of the completed structure

Material testing verifies that actual supplied materials meet the quality assumed in design, safeguarding structural safety and durability.

Question 28

Adhesives, used in construction for bonding various materials together (such as tiles to a floor/wall substrate, or laminated timber members), are generally selected based on considerations including

  1. the specific materials being bonded, the required bond strength, exposure conditions (such as moisture or temperature), and the intended service life, since no single adhesive is universally suitable for every application
  2. color alone, with absolutely no reference to the materials being bonded or the required bond strength/durability
  3. price alone, with absolutely no reference to technical suitability for the intended application whatsoever
  4. the adhesive's smell alone, with no reference to any technical performance consideration at all
Show answer & solution

Answer: (A) the specific materials being bonded, the required bond strength, exposure conditions (such as moisture or temperature), and the intended service life, since no single adhesive is universally suitable for every application

Adhesive selection weighs the bonded materials, required strength, exposure conditions, and service life together.

Practice these 28 questions interactively →