Glass blocks (glass bricks), used in some wall and partition construction where light transmission combined with a degree of privacy/obscuration is desired, are generally manufactured as
solid, completely transparent blocks, with perfectly clear visibility through them, exactly like ordinary window glass
hollow (or sometimes solid) units, often with a textured or patterned surface, that transmit light while diffusing/obscuring a clear direct view through them, and can offer a degree of thermal insulation (particularly the hollow types)
purely opaque, completely blocking all light transmission, exactly like an ordinary opaque masonry block
units used exclusively for structural columns, with no application to walls or partitions at all
Show answer & solution
Answer: (B) hollow (or sometimes solid) units, often with a textured or patterned surface, that transmit light while diffusing/obscuring a clear direct view through them, and can offer a degree of thermal insulation (particularly the hollow types)
Glass blocks are often hollow, textured units that transmit and diffuse light while obscuring a clear view, and can insulate.
Question 2
Sanitary ware, such as wash basins, water closets (WCs), and similar plumbing fixtures, is very commonly manufactured from
vitreous china (a dense, glazed ceramic material), chosen for its smooth, easily cleaned, non-porous, and durable surface
untreated, porous ordinary clay brick material, with no vitrification or glazing at all
pure structural steel, with no ceramic component whatsoever
pure timber, with no ceramic or vitrified component at all
Show answer & solution
Answer: (A) vitreous china (a dense, glazed ceramic material), chosen for its smooth, easily cleaned, non-porous, and durable surface
Vitreous china's smooth, non-porous, easily cleaned surface makes it the standard material for sanitary fixtures.
Question 3
Ceramic tiles, commonly used for flooring and wall finishing, are essentially manufactured by
shaping a suitable clay-based (or similar ceramic) body and firing it at high temperature, often with a glazed (or unglazed) surface finish
casting molten steel into thin, flat sheets
extruding molten plastic into thin, flat sheets
a purely chemical vapor deposition process, with no clay or firing involved at all
Show answer & solution
Answer: (A) shaping a suitable clay-based (or similar ceramic) body and firing it at high temperature, often with a glazed (or unglazed) surface finish
Ceramic tiles are shaped clay-based bodies, fired at high temperature, with an optional glaze finish.
Question 4
Fire-resistant (fire-rated) glass, used in specific applications such as fire doors or compartmentation, is specially designed/manufactured to
shatter and fall away completely and immediately when exposed to fire, providing no barrier function whatsoever
maintain its integrity (and often also limit heat transmission) for a specified, tested duration when exposed to fire conditions, helping to contain the spread of fire and smoke for that period
melt and flow away rapidly under any exposure to elevated temperature, well before a typical fire-rating duration is reached
provide absolutely no fire-related performance benefit whatsoever, compared to ordinary untreated glass
Show answer & solution
Answer: (B) maintain its integrity (and often also limit heat transmission) for a specified, tested duration when exposed to fire conditions, helping to contain the spread of fire and smoke for that period
Fire-rated glass is engineered to keep its integrity and limit heat transfer for a tested duration, containing fire spread.
Question 5
Glazed ceramic tiles, having a thin, fused glass-like coating on their surface, are generally valued mainly for their
improved water resistance/impermeability, ease of cleaning, and typically decorative/glossy appearance, compared to unglazed tiles
significantly reduced strength, compared to unglazed tiles of the same body composition, in every case
complete inability to be used in any wet area, such as a bathroom, due to the glaze
an inherent requirement to always be a single, uniform color, with no decorative patterns possible
Show answer & solution
Answer: (A) improved water resistance/impermeability, ease of cleaning, and typically decorative/glossy appearance, compared to unglazed tiles
The glaze coating improves water resistance, cleanability, and gives a glossy decorative finish.
Question 6
Insulated glazing units (double glazing, or IGUs), consisting of two (or more) glass panes separated by a sealed air (or inert gas) gap, are used mainly to improve a window's
resistance to breakage from mechanical impact, with no reference to thermal or acoustic performance at all
thermal insulation performance (reducing heat transfer through the window), and often also its acoustic (sound) insulation performance, compared to a single pane of glass of the same total glass thickness
transparency/optical clarity, well beyond that achievable with a single pane of the same glass type
fire-resistance rating exclusively, with no reference to thermal or acoustic performance
Show answer & solution
Answer: (B) thermal insulation performance (reducing heat transfer through the window), and often also its acoustic (sound) insulation performance, compared to a single pane of glass of the same total glass thickness
Double glazing's sealed gas gap primarily improves thermal insulation, and often also acoustic insulation.
Question 7
Laminated (safety) glass is manufactured by
simply heating and rapidly cooling a single sheet of ordinary glass, exactly as in the toughening process
bonding two (or more) layers of glass together with an interlayer of a tough, transparent plastic material (such as PVB), so that if the glass breaks, the fragments tend to remain adhered to the plastic interlayer rather than scattering
melting several colors of glass together to create a decorative, stained-glass effect, with no reference to any safety consideration
coating ordinary glass with a thin metallic film, with no plastic interlayer or lamination involved at all
Show answer & solution
Answer: (B) bonding two (or more) layers of glass together with an interlayer of a tough, transparent plastic material (such as PVB), so that if the glass breaks, the fragments tend to remain adhered to the plastic interlayer rather than scattering
Laminated glass bonds layers with a plastic interlayer so fragments stick together rather than scattering when broken.
Question 8
PVC (polyvinyl chloride), a widely used construction plastic, is commonly used for products such as
pipes (for water supply, drainage, or electrical conduit), window/door frames, and various fittings
primary structural load-bearing beams and columns in high-rise buildings, in place of steel or concrete, in the vast majority of applications
primary reinforcement for concrete, functionally replacing steel reinforcing bars, in the vast majority of applications
primary aggregate for concrete production, functionally replacing natural stone/gravel aggregate
Show answer & solution
Answer: (A) pipes (for water supply, drainage, or electrical conduit), window/door frames, and various fittings
PVC's typical construction applications are pipes, window/door frames, and various fittings, not primary structural members.
Question 9
Plastics (polymers) used in construction applications, such as PVC pipes or window frames, are generally valued for properties including
high resistance to corrosion, relatively low weight, and good moldability into complex shapes
an inherent inability to be shaped into any useful construction product whatsoever
extremely high resistance to fire and heat, exceeding that of steel or concrete, in every case
zero durability, requiring replacement after only a few days of service, in every application
Show answer & solution
Answer: (A) high resistance to corrosion, relatively low weight, and good moldability into complex shapes
Construction plastics are valued for corrosion resistance, light weight, and ease of molding into varied shapes.
Question 10
Reflective (coated) glass, having a thin metallic (or metal oxide) coating applied to one surface, is used partly to
reflect a significant portion of incident solar radiation away from the building, helping to reduce solar heat gain, while also often providing a distinctive mirror-like exterior appearance
absorb virtually all incident light, with no reflection at all, rendering the glass essentially black in appearance
have no effect on either light transmission or reflection, being functionally identical to ordinary clear glass
provide primarily an acoustic (sound) insulation benefit, with no relation to solar heat or light reflection at all
Show answer & solution
Answer: (A) reflect a significant portion of incident solar radiation away from the building, helping to reduce solar heat gain, while also often providing a distinctive mirror-like exterior appearance
The metallic coating reflects solar radiation to reduce heat gain, often giving reflective glass its mirror-like look.
Question 11
The primary raw material providing the characteristic hardness and chemical durability of ordinary glass is
silica (silicon dioxide), typically derived from suitably pure sand
soda ash alone, with no reference to silica content
limestone alone, with no reference to silica content
pure water, with no reference to silica, soda ash, or limestone
Show answer & solution
Answer: (A) silica (silicon dioxide), typically derived from suitably pure sand
Silica (from pure sand) is the primary component giving glass its hardness and chemical durability.
Question 12
Thermoplastic materials, one broad category of plastics used in construction (such as PVC), are generally characterized by their ability to
be repeatedly softened by heating and hardened again upon cooling, without significant permanent chemical change, allowing them to be reshaped/remolded
undergo a permanent, irreversible chemical change upon initial heating/curing, after which they cannot be re-softened or reshaped by further heating
exist only in a liquid state, with no ability to solidify into a useful solid form at all
be used exclusively as a liquid adhesive, with no application as a solid construction material
Show answer & solution
Answer: (A) be repeatedly softened by heating and hardened again upon cooling, without significant permanent chemical change, allowing them to be reshaped/remolded
Thermoplastics can be repeatedly softened by heat and reshaped, without permanent chemical change.
Question 13
Thermosetting plastics, another broad category (such as many epoxy resins), are generally characterized by their
ability to be repeatedly re-softened and reshaped by heating, exactly like a thermoplastic material
undergoing a permanent, irreversible curing (chemical cross-linking) reaction upon initial heating (or with a suitable catalyst/hardener), after which they cannot be re-softened/reshaped by further heating
complete inability to solidify into any useful solid form under any circumstances
being usable exclusively as a liquid adhesive, with no application as a solid material
Show answer & solution
Answer: (B) undergoing a permanent, irreversible curing (chemical cross-linking) reaction upon initial heating (or with a suitable catalyst/hardener), after which they cannot be re-softened/reshaped by further heating
Thermosets cure permanently via cross-linking and cannot be re-softened/reshaped once cured, unlike thermoplastics.
Question 14
Tinted (heat-absorbing) glass, incorporating certain metal oxide additives during manufacture, is used mainly to
completely block all visible light transmission through the glass, rendering it fully opaque
reduce the transmission of solar heat (and glare) through the glass into a building's interior, compared to ordinary clear glass, while still allowing a substantial degree of visible light transmission
increase the transmission of solar heat into the building's interior, well beyond that of ordinary clear glass
have no effect whatsoever on either light or heat transmission, compared to ordinary clear glass
Show answer & solution
Answer: (B) reduce the transmission of solar heat (and glare) through the glass into a building's interior, compared to ordinary clear glass, while still allowing a substantial degree of visible light transmission
Tinted glass reduces solar heat and glare transmission while still allowing substantial visible light through.
Question 15
Toughened (tempered) glass, compared to ordinary annealed glass of the same thickness, is generally
considerably weaker and more prone to breaking under a given load or impact
considerably stronger (more resistant to breakage from mechanical or thermal stress), and importantly, tends to shatter into small, relatively blunt fragments (rather than large, sharp shards) if it does break, improving safety
identical in every mechanical and safety-related respect to ordinary annealed glass
unable to be used in any building application, being purely a laboratory/experimental material
Show answer & solution
Answer: (B) considerably stronger (more resistant to breakage from mechanical or thermal stress), and importantly, tends to shatter into small, relatively blunt fragments (rather than large, sharp shards) if it does break, improving safety
Toughening greatly strengthens glass and makes it fracture into small, blunt fragments rather than sharp shards.
Question 16
Vitrified tiles, a more modern and increasingly popular flooring material, are manufactured by firing a suitable body (often incorporating a significant proportion of feldspar and other minerals, in addition to clay) at a sufficiently high temperature to achieve
a highly porous, weak, and crumbly final product, unsuitable for any flooring application
a dense, low-porosity, hard-wearing final product with water absorption typically much lower than that of many conventional ceramic tiles, giving good durability and stain resistance
a product that must always remain unfired (raw) to be considered vitrified
a product that is functionally identical, in every respect, to ordinary untreated natural stone, with no distinction at all
Show answer & solution
Answer: (B) a dense, low-porosity, hard-wearing final product with water absorption typically much lower than that of many conventional ceramic tiles, giving good durability and stain resistance
Vitrification produces a dense, low-porosity tile with low water absorption, giving good durability and stain resistance.
Question 17
Wired glass, containing a wire mesh embedded within the glass sheet during manufacture, is generally valued mainly for its
significantly improved transparency and optical clarity, compared to ordinary glass, with no other functional benefit
ability to hold together, at least to some degree, even when cracked/broken (since the embedded wire helps retain the glass fragments in place), and it is also sometimes specified for a degree of fire-resistance rating in certain applications
complete elimination of the need for any window frame whatsoever
significantly reduced weight, compared to an equivalent thickness of ordinary (unwired) glass
Show answer & solution
Answer: (B) ability to hold together, at least to some degree, even when cracked/broken (since the embedded wire helps retain the glass fragments in place), and it is also sometimes specified for a degree of fire-resistance rating in certain applications
The embedded wire mesh holds broken fragments together and can contribute to a fire-resistance rating in some uses.
Question 18
Ordinary (soda-lime) glass, the most common type used in general building applications (such as window panes), is manufactured mainly from a mixture of
silica (sand), soda ash (sodium carbonate), and limestone (calcium carbonate), melted together at high temperature
pure limestone alone, with no silica or soda ash involved
pure steel slag alone, with no silica or soda ash involved
pure clay alone, with no silica, soda ash, or limestone involved
Show answer & solution
Answer: (A) silica (sand), soda ash (sodium carbonate), and limestone (calcium carbonate), melted together at high temperature
Soda-lime glass is made by melting silica, soda ash, and limestone together at high temperature.
More Civil Engineering Building Materials practice