The clinker is formed at a temperature of
Show answer & solution
Answer: (D) 1500°C
Raw material mixes in a rotary kiln undergo partial fusion and chemical combination at peak temperatures between 1400°C and 1500°C to form cement clinkers.
Civil Engineering · Building Materials
29 questions, each with the answer and a worked solution.
Practice interactively and track your score →The clinker is formed at a temperature of
Answer: (D) 1500°C
Raw material mixes in a rotary kiln undergo partial fusion and chemical combination at peak temperatures between 1400°C and 1500°C to form cement clinkers.
A good quality cement should have higher percentage of
Answer: (D) tri-calcium silicate
Tri-calcium silicate (C3S) hydrates quickly and provides high early strength, making it desirable for high-quality Portland cement.
Air-entraining cement (or the use of air-entraining admixtures with ordinary cement) is used mainly to improve concrete's resistance to
Answer: (B) damage from repeated freezing and thawing cycles, by introducing tiny, well-distributed air bubbles into the hardened concrete
Entrained microscopic air bubbles relieve internal pressure from freezing water, protecting concrete from freeze-thaw damage.
Cement clinker, the intermediate product formed in the kiln, is
Answer: (B) a nodular material that must be cooled and then finely ground (with gypsum added) to produce the final cement powder
Clinker nodules are cooled and then ground with gypsum to produce the finished cement powder.
Gypsum is added in the manufacture of Portland cement in order to
Answer: (B) lengthen the setting time of cement
Without gypsum, cement would undergo flash set instantly upon water contact; gypsum acts as a retarder to lengthen setting time.
Gypsum is added to cement clinker during grinding mainly to
Answer: (B) control (retard) the setting time of cement, preventing flash set
Gypsum regulates the rapid reaction of C3A, preventing an unworkably fast (flash) set.
Hydrophobic cement is manufactured mainly by treating ordinary cement clinker with a
Answer: (A) water-repellent film-forming substance, which delays the hydration of the cement until the film is worn/ground off during mixing, making it suitable for storage in humid conditions or transport over water
A thin water-repellent film protects hydrophobic cement grains from premature hydration during humid storage or transport.
In the wet process of cement manufacture, raw materials are ground and mixed with water to form a
Answer: (B) slurry, which is then fed into the kiln
The wet process combines ground raw materials with water into a pumpable slurry before kiln feeding.
Low Heat Cement is manufactured mainly by
Answer: (B) reducing the proportion of tricalcium aluminate (C3A) and tricalcium silicate (C3S), and increasing dicalcium silicate (C2S), to reduce the heat generated during hydration
Reducing the high-heat-generating compounds (C3A, C3S) in favor of C2S lowers the overall heat of hydration.
Low Heat Cement is particularly suitable for use in
Answer: (B) mass concrete works, such as large dams, where excessive heat of hydration could otherwise cause thermal cracking
Large concrete masses are especially vulnerable to thermal cracking from hydration heat, making low heat cement ideal there.
Portland Pozzolana Cement (PPC) is manufactured by intergrinding (or blending) ordinary Portland cement clinker with a
Answer: (A) pozzolanic material, such as fly ash or calcined clay, which reacts with the lime released during cement hydration to form additional cementitious compounds
PPC blends clinker with a pozzolanic material (like fly ash) that reacts with hydration lime to form more binder.
Portland Slag Cement is manufactured by intergrinding (or blending) ordinary Portland cement clinker with a
Answer: (A) suitably processed (granulated) blast furnace slag, a byproduct of iron manufacture
Portland Slag Cement blends clinker with granulated blast furnace slag, an iron-making byproduct.
Rapid Hardening Cement (RHC) is manufactured mainly by
Answer: (A) increasing the proportion of tricalcium silicate (C3S) and grinding it finer than ordinary Portland cement, to gain strength more quickly
Higher C3S content plus finer grinding accelerates early hydration and strength gain in RHC.
Sulfate Resisting Cement is manufactured mainly by
Answer: (B) limiting (reducing) the tricalcium aluminate (C3A) content, since C3A is particularly vulnerable to reaction with sulfates, leading to expansive, disruptive products
C3A reacts with sulfates to form expansive compounds, so limiting C3A improves sulfate resistance.
Sulfate Resisting Cement is particularly suitable for use in structures exposed to
Answer: (B) soils or groundwater containing significant sulfate concentrations, or in marine/coastal environments
Sulfate-rich soils, groundwater, and marine exposure are the classic applications for sulfate resisting cement.
The amount of gypsum usually added in the manufacture of cement is
Answer: (C) 1 to 3%
Approximately 1% to 3% gypsum (calcium sulfate) is interground with clinkers to regulate and retard setting time.
The cementing property in cement is mainly due to
Answer: (A) lime
Lime compounds react during hydration to form calcium silicate hydrates, which provide the primary binding matrix.
The dry process of cement manufacture, compared to the wet process, is generally more
Answer: (B) energy-efficient, since the raw materials are ground and blended as a dry powder, without the need to evaporate significant water in the kiln
Avoiding the need to evaporate slurry water makes the dry process considerably more energy-efficient, and it dominates modern plants.
The main constituent of a Portland cement is
Answer: (A) lime
Lime (calcium oxide) forms roughly 60% to 67% of Portland cement composition and is its primary active ingredient.
The main raw materials for manufacturing ordinary Portland cement are
Answer: (A) limestone (calcareous material) and clay (argillaceous material)
Portland cement is made primarily from limestone (lime source) and clay (silica/alumina source).
The percentage of the slag component of Portland-slag cement varies from
Answer: (A) 10 to 40%
Portland-slag cement blends granulated blast furnace slag typically between 10% and 40% with Portland cement clinker.
The process of manufacturing Portland cement broadly involves
Answer: (A) mixing and grinding raw materials, burning the mixture in a kiln to form clinker, then grinding the clinker with gypsum
This is the standard sequence: raw material preparation, kiln burning to clinker, then final grinding with gypsum.
The rapid hardening Portland cement has a
Answer: (B) higher heat of hydration
Because rapid hardening cement is ground finer and richer in C3S, it releases heat of hydration much faster than ordinary cement.
The rapid hardening Portland cement is obtained by
Answer: (A) grinding the clinker to a high degree of fineness
Finer grinding increases the specific surface area, accelerating water contact and rapid early hydration.
The rotary kiln, a key piece of equipment in cement manufacturing, is used mainly to
Answer: (B) heat the raw material mix to a high temperature, causing chemical reactions that form cement clinker
The rotary kiln is where high-temperature chemical reactions convert the raw meal into cement clinker.
The silica in Portland cement should be
Answer: (B) 20 to 25%
Silica content in standard Portland cement typically ranges between 20% and 25%, forming silicates that impart strength.
The strength of white cement is _____________ that of ordinary grey cement.
Answer: (A) equal to
White cement has the same structural strength and performance characteristics as ordinary Portland cement, differing mainly in raw material purity and iron oxide absence.
The two main processes used for manufacturing cement, based on how the raw materials are prepared, are
Answer: (A) wet process and dry process
Cement manufacturing is classified by raw material preparation into the wet process (slurry) and dry process (powder).
White cement is manufactured using raw materials that are low in
Answer: (B) iron oxide (and other coloring compounds like manganese), to achieve a white color
Minimizing iron oxide and similar coloring compounds is key to achieving white cement's light color.