Structural steel, compared to reinforced concrete, generally offers the advantage of a considerably
lower strength-to-weight ratio, making it heavier for a given load capacity, in virtually every case
higher strength-to-weight ratio, allowing lighter structural members (and often faster construction/erection) for a comparable load capacity
identical strength-to-weight ratio in every conceivable case, with absolutely no distinction between the two materials
complete immunity to fire, requiring no fire protection measures whatsoever, in every application
Show answer & solution
Answer: (B) higher strength-to-weight ratio, allowing lighter structural members (and often faster construction/erection) for a comparable load capacity
Steel's higher strength-to-weight ratio allows lighter members and typically faster erection than reinforced concrete.
Question 2
Cast iron, as distinguished from mild (structural) steel, generally has a considerably
lower carbon content than mild steel
higher carbon content than mild steel (typically around 2% to 4%), making it more brittle and generally less suitable for tension members, though strong in compression
identical carbon content to mild steel, with no meaningful difference
higher ductility and weldability than mild steel
Show answer & solution
Answer: (B) higher carbon content than mild steel (typically around 2% to 4%), making it more brittle and generally less suitable for tension members, though strong in compression
Cast iron's much higher carbon content (2-4%) makes it brittle in tension, though it remains strong in compression.
Question 3
Cold-worked (or cold-twisted) deformed reinforcing bars, compared to plain mild steel bars of the same nominal diameter, generally offer
lower yield strength and a completely smooth surface, with no surface deformations at all
higher yield strength (achieved through the cold-working process), along with surface deformations (ribs) that improve the mechanical bond between the steel and surrounding concrete, compared to plain round bars
identical mechanical properties to plain mild steel bars, with no distinction whatsoever
an inability to be used in any reinforced concrete application
Show answer & solution
Answer: (B) higher yield strength (achieved through the cold-working process), along with surface deformations (ribs) that improve the mechanical bond between the steel and surrounding concrete, compared to plain round bars
Cold-working raises yield strength, and surface ribs on deformed bars improve bond with surrounding concrete.
Question 4
Common methods used to improve the fire resistance of exposed structural steel members include
applying intumescent (fire-resistant) paint coatings, or encasing the steel in fire-resistant board/concrete/plaster to insulate it from rapid temperature rise
deliberately leaving the steel fully exposed, with absolutely no additional protective treatment, since none is considered necessary or beneficial
painting the steel with ordinary, non-fire-rated decorative paint alone, with no other consideration
there are no known or practical methods to improve steel's fire resistance in a structure
Show answer & solution
Answer: (A) applying intumescent (fire-resistant) paint coatings, or encasing the steel in fire-resistant board/concrete/plaster to insulate it from rapid temperature rise
Intumescent coatings and fire-resistant encasement are standard methods used to slow steel's temperature rise during a fire.
Question 5
Common methods used to protect structural steel from corrosion include
applying protective paint coatings, and/or galvanizing (coating with a protective layer of zinc)
intentionally exposing the steel to additional moisture, to accelerate a supposedly protective natural coating
applying a thin layer of pure carbon powder, with no other treatment
there are no effective methods to protect steel from corrosion, since it is entirely unavoidable
Show answer & solution
Answer: (A) applying protective paint coatings, and/or galvanizing (coating with a protective layer of zinc)
Paint coatings and galvanizing are the two most common practical corrosion protection methods for structural steel.
Question 6
Corrosion of steel (rusting), a significant durability concern, occurs mainly due to a chemical reaction between iron and
pure, dry nitrogen gas, with no other substances involved
oxygen and moisture (water), in the presence of which iron progressively oxidizes to form iron oxide (rust)
pure carbon dioxide alone, with no oxygen or moisture involved
ultraviolet light alone, with no chemical reactants involved at all
Show answer & solution
Answer: (B) oxygen and moisture (water), in the presence of which iron progressively oxidizes to form iron oxide (rust)
Rusting is the oxidation of iron in the presence of both oxygen and moisture.
Question 7
Fatigue failure of a structural steel member, a concern particularly under repeated/cyclic loading (such as in bridges or machine components), can occur at a stress level that is
always well above the material's ultimate tensile strength, with no exception
considerably below the material's static ultimate (and even below its yield) strength, if the loading is repeated a sufficient number of cycles
always exactly equal to the material's yield strength, in every single case
irrelevant to steel, since steel is claimed to be completely immune to any form of fatigue failure
Show answer & solution
Answer: (B) considerably below the material's static ultimate (and even below its yield) strength, if the loading is repeated a sufficient number of cycles
Fatigue failure occurs at stresses well below static ultimate or yield strength if enough load cycles accumulate.
Question 8
Fire resistance of exposed structural steel members, in the event of a building fire, is generally a significant concern mainly because steel
becomes stronger and stiffer as its temperature rises during a fire, with no adverse effect on its structural capacity
progressively loses a substantial portion of its strength and stiffness as its temperature rises significantly during a fire, potentially leading to structural failure if left unprotected
is entirely non-combustible and therefore requires absolutely no fire protection measures under any circumstances
is unaffected by heat until it reaches its actual melting point, with no earlier reduction in strength
Show answer & solution
Answer: (B) progressively loses a substantial portion of its strength and stiffness as its temperature rises significantly during a fire, potentially leading to structural failure if left unprotected
Steel loses significant strength and stiffness well before melting, making unprotected steel vulnerable to fire-induced failure.
Question 9
Galvanizing steel refers to the process of coating it with a protective layer of
pure copper
zinc, which provides both a physical barrier and a sacrificial (cathodic) protection effect against corrosion of the underlying steel
pure gold
pure carbon
Show answer & solution
Answer: (B) zinc, which provides both a physical barrier and a sacrificial (cathodic) protection effect against corrosion of the underlying steel
Galvanizing applies zinc, which both physically shields the steel and sacrificially corrodes in its place.
Question 10
High-strength (high-tensile) friction grip (HSFG) bolts, used in some structural steel connections, transfer load primarily through
shear and bearing on the bolt shank alone, with no contribution from friction at all
friction developed between the clamped steel plates, due to the very high pretension (clamping force) applied to the bolt during installation
a chemical adhesive bond between the bolt and the surrounding plate material
welding action, since HSFG bolts are, by definition, a type of weld rather than a mechanical fastener
Show answer & solution
Answer: (B) friction developed between the clamped steel plates, due to the very high pretension (clamping force) applied to the bolt during installation
HSFG bolts rely mainly on friction from high pretension clamping the plates together, rather than shear/bearing alone.
Question 11
Mild steel, a common grade of structural steel, generally has a carbon content, by weight, of approximately
less than about 0.25% (relatively low), giving it good ductility and weldability
10% to 15%, a relatively high carbon content
essentially 0%, i.e., pure iron with absolutely no carbon
more than 50%
Show answer & solution
Answer: (A) less than about 0.25% (relatively low), giving it good ductility and weldability
Mild steel's low carbon content (below about 0.25%) gives it good ductility and weldability.
Question 12
Recycling of structural steel, at the end of a building's or structure's service life, is generally considered
impossible, since steel cannot be melted down and reused once it has been formed into a structural shape
relatively straightforward and common, since steel scrap can be readily melted down and reprocessed into new steel products, making it a comparatively sustainable structural material in this respect
a process that destroys all of the steel's useful properties, making recycled steel entirely unusable for any new structural application
something that has never actually been practiced in the steel industry
Show answer & solution
Answer: (B) relatively straightforward and common, since steel scrap can be readily melted down and reprocessed into new steel products, making it a comparatively sustainable structural material in this respect
Steel is highly recyclable, with scrap readily remelted into new steel products, giving it a sustainability advantage.
Question 13
Stainless steel, compared to ordinary (carbon) structural steel, contains a significant proportion of
chromium (often along with nickel and other elements), which forms a thin, self-healing protective oxide layer on the surface, giving it much greater inherent corrosion resistance
pure carbon, with absolutely no chromium or nickel content
pure aluminum, with no chromium content at all
pure zinc, applied as a bulk alloying element rather than as a surface coating
Show answer & solution
Answer: (A) chromium (often along with nickel and other elements), which forms a thin, self-healing protective oxide layer on the surface, giving it much greater inherent corrosion resistance
Chromium (often with nickel) forms a self-healing passive oxide film that gives stainless steel its corrosion resistance.
Question 14
Steel with excessively high carbon content, or certain other alloying elements/impurities, may exhibit reduced weldability mainly due to an increased tendency towards
improved, more reliable weld quality in every case, with no downside whatsoever
hardening and potential cracking in the heat-affected zone around the weld, requiring special precautions (such as preheating) for successful welding
an complete inability to be melted at all, under any circumstances
a significant increase in ductility specifically in the welded region, with no other effect
Show answer & solution
Answer: (B) hardening and potential cracking in the heat-affected zone around the weld, requiring special precautions (such as preheating) for successful welding
High carbon content risks brittle hardening and cracking near the weld, often requiring preheating precautions.
Question 15
Structural steel is generally well suited to resisting
compressive loads only, being entirely unsuitable for any tensile loading whatsoever
both tensile and compressive loads reasonably well (unlike plain concrete, which is comparatively weak in tension), making it valuable for a wide range of structural applications, including as reinforcement within reinforced concrete
neither tensile nor compressive loads, being suitable only for purely decorative, non-structural applications
only very short-span, lightly loaded structures, with no application to larger structures
Show answer & solution
Answer: (B) both tensile and compressive loads reasonably well (unlike plain concrete, which is comparatively weak in tension), making it valuable for a wide range of structural applications, including as reinforcement within reinforced concrete
Steel's dual strength in tension and compression makes it versatile, and vital as reinforcement for tension-weak concrete.
Question 16
Structural steel sections are commonly classified (in various design codes) by their cross-sectional slenderness/proportions into categories such as plastic, compact, semi-compact, and slender, mainly to assess their
color classification, with no reference to structural behavior
susceptibility to local buckling of individual plate elements (such as a flange or web) before the full plastic (or yield) capacity of the section can be developed
chemical composition only, with no reference to their geometric proportions
manufacturing cost only, with no reference to any structural behavior
Show answer & solution
Answer: (B) susceptibility to local buckling of individual plate elements (such as a flange or web) before the full plastic (or yield) capacity of the section can be developed
These classifications assess how prone a section's plate elements are to local buckling before reaching full capacity.
Question 17
Structural steel sections, such as I-beams, channels, and angles, are commonly produced by
casting molten steel directly into the final finished shape, with no further mechanical processing
hot-rolling (or, for some sections, cold-forming) steel through a series of shaped rollers to produce the desired standard cross-sectional profile
hand-forging each individual section entirely by hammer, with no rolling process involved
a purely chemical (non-mechanical) process, with no rolling or casting involved
Show answer & solution
Answer: (B) hot-rolling (or, for some sections, cold-forming) steel through a series of shaped rollers to produce the desired standard cross-sectional profile
Standard structural sections are typically hot-rolled (or cold-formed) through shaped rollers to their final profile.
Question 18
Structural steel, as commonly used in construction, is essentially an alloy of
iron and carbon (with small amounts of other elements), with the carbon content generally kept relatively low compared to cast iron
pure iron, with absolutely no carbon or other alloying elements present
copper and zinc, with no iron content at all
aluminum and silicon, with no iron content at all
Show answer & solution
Answer: (A) iron and carbon (with small amounts of other elements), with the carbon content generally kept relatively low compared to cast iron
Structural steel is fundamentally an iron-carbon alloy, with carbon kept lower than in cast iron.
Question 19
The best primer used for structural steel work is
white lead
red lead
zinc oxide
iron oxide
Show answer & solution
Answer: (B) red lead
Red lead provides excellent corrosion inhibition and rust-preventative priming on structural steel surfaces.
Question 20
The grade of reinforcing steel bars, such as Fe415 or Fe500 (common in some national standards), indicates the bar's
color
minimum characteristic yield strength, expressed in N/mm2 (or MPa)
diameter, expressed directly in millimeters
manufacturer's brand name only, with no reference to any mechanical property
The Fe-number directly states the bar's guaranteed minimum characteristic yield strength in N/mm2.
Question 21
Weldability of structural steel refers to its suitability for being
joined to another piece of steel by melting and fusing the material at the joint (typically using heat from an electric arc or gas flame, often with added filler metal)
joined only using rivets, with no possibility of any welded connection
joined only using adhesive bonding, with no possibility of any welded connection
melted down completely and re-cast into an entirely different shape, with no reference to joining separate pieces
Show answer & solution
Answer: (A) joined to another piece of steel by melting and fusing the material at the joint (typically using heat from an electric arc or gas flame, often with added filler metal)
Weldability specifically describes suitability for fusion joining by melting and fusing at the joint.
More Civil Engineering Building Materials practice