Gneiss is a high-grade metamorphic rock formed from igneous or sedimentary protoliths and is categorized chemically as silicious due to its high quartz and feldspar content.
Question 2
Laterite is chemically classified as
calcareous rock
argillaceous rock
silicious rock
metamorphic rock
Show answer & solution
Answer: (B) argillaceous rock
Laterite is rich in hydrated iron and aluminum oxides derived from the weathering of clay-rich rocks, categorizing it chemically as argillaceous.
Question 3
Moorum is a decomposed laterite and has deep brown or red colour.
Yes
No
Show answer & solution
Answer: (A) Yes
Moorum consists of weathered/decomposed laterite rocks containing iron oxides, which give it characteristic red and brown hues.
Question 4
The compressive strength of felspar is _____________ quartz.
equal to
less than
more than
Show answer & solution
Answer: (B) less than
Feldspar has a lower hardness (Mohs scale 6) and compressive strength compared to pure quartz (Mohs scale 7).
Question 5
A good building stone is one which does not absorb more than _____________ of its weight of water after one day’s immersion.
5%
10%
15%
25%
Show answer & solution
Answer: (A) 5%
Water absorption is a key durability metric; a quality construction stone should absorb no more than 5% of its dry weight in 24 hours.
Question 6
A limestone containing about 30% of alumina and silica is called
granular limestone
compact limestone
magnesium limestone
kankar
Show answer & solution
Answer: (D) kankar
Kankar is an impure, nodular limestone containing significant amounts of clay, silica, and alumina.
Question 7
A limestone found in seams of great thickness is called
granular limestone
compact limestone
magnesium limestone
kankar
Show answer & solution
Answer: (B) compact limestone
Compact limestones form massive, thick deposits and are dense, heavy, and suitable for major construction.
Question 8
A stone used for facing/cladding work on a building's exterior is generally selected with particular attention to its
compressive strength alone, with no reference to appearance or weathering resistance
appearance (color, texture, ability to take a good finish/polish) as well as durability/weathering resistance, since it is primarily an exposed, often decorative, application
magnetic properties, with no other consideration
its ability to conduct electricity
Show answer & solution
Answer: (B) appearance (color, texture, ability to take a good finish/polish) as well as durability/weathering resistance, since it is primarily an exposed, often decorative, application
Facing stone selection weighs both aesthetic qualities and weathering durability, since it's a highly visible, exposed application.
Question 9
Artificial stone (or cast stone) is manufactured mainly by
quarrying natural rock and simply cutting it to size, with no other processing
casting a suitable mixture (such as cement, aggregate, and sometimes pigments) into molds, to produce units that imitate the appearance of natural stone
melting natural stone and re-solidifying it into a new shape
a purely chemical vapor deposition process, with no molding involved
Show answer & solution
Answer: (B) casting a suitable mixture (such as cement, aggregate, and sometimes pigments) into molds, to produce units that imitate the appearance of natural stone
Artificial (cast) stone is manufactured by molding a cement-aggregate-pigment mix to mimic natural stone appearance.
Question 10
Building stones are broadly classified, based on their geological origin, into
igneous, sedimentary, and metamorphic rocks
only igneous rocks, with no other classification used in practice
only sedimentary rocks
hard stones and soft stones only, with no reference to geological origin
Show answer & solution
Answer: (A) igneous, sedimentary, and metamorphic rocks
The standard geological classification of rock (and hence building stone) is igneous, sedimentary, or metamorphic.
Question 11
Dressing of stone refers to the process of
extracting the stone from the quarry
shaping and finishing quarried stone blocks into the required size, shape, and surface texture for use in construction
testing the stone's compressive strength
chemically treating the stone to resist weathering, with no reference to shape or size
Show answer & solution
Answer: (B) shaping and finishing quarried stone blocks into the required size, shape, and surface texture for use in construction
Dressing shapes and finishes already-quarried stone blocks to their required construction dimensions and texture.
Question 12
Fat lime (or pure/rich lime), made from relatively pure limestone with little clay content, is characterized by
very poor workability and an inability to be used in mortars at all
good workability as a mortar, but the mortar hardens mainly by slow carbonation (reaction with atmospheric CO2) rather than by any hydraulic (water-based) setting action, making it unsuitable for continuously wet/underwater conditions
the ability to set and harden reliably underwater, exactly like hydraulic lime or cement
being identical, in every practical respect, to ordinary Portland cement
Show answer & solution
Answer: (B) good workability as a mortar, but the mortar hardens mainly by slow carbonation (reaction with atmospheric CO2) rather than by any hydraulic (water-based) setting action, making it unsuitable for continuously wet/underwater conditions
Fat lime mortar hardens slowly by absorbing atmospheric CO2, and cannot set underwater, unlike hydraulic binders.
Question 13
For railway ballast, the stone should be
soft with a uniform texture
hard, heavy, strong and durable
hard, tough, resistant to abrasion and durable
hard, dense, durable, tough and easily workable
Show answer & solution
Answer: (C) hard, tough, resistant to abrasion and durable
Railway ballast undergoes continuous dynamic impact and abrasive loads, requiring hard, tough, abrasion-resistant, and durable aggregates.
Question 14
For the construction of retaining walls, a _____________ stone must be used.
soft
hard
heavy
Show answer & solution
Answer: (C) heavy
Retaining walls rely on gravity and mass to resist lateral earth pressures, making heavy stones necessary.
Question 15
Frost action can be a significant durability concern for a porous building stone in cold climates mainly because
water absorbed into the stone's pores can freeze, expand, and cause internal disruptive stresses, potentially cracking or spalling the stone
frost has no effect whatsoever on stone, regardless of porosity
it only affects the stone's color, with no structural consequence
it makes the stone stronger over time
Show answer & solution
Answer: (A) water absorbed into the stone's pores can freeze, expand, and cause internal disruptive stresses, potentially cracking or spalling the stone
Freezing water in pores expands, generating internal stress that can crack or spall porous stone over repeated cycles.
Question 16
Granite is an example of
aqueous rocks
sedimentary rocks
metamorphic rocks
igneous rocks
Show answer & solution
Answer: (D) igneous rocks
Granite is a common intrusive igneous rock formed from the slow cooling of magma rich in silica and alkali metals beneath the earth's crust.
Question 17
Granite is mainly composed of
quartz and mica
felspar and mica
quartz and felspar
quartz, felspar and mica
Show answer & solution
Answer: (D) quartz, felspar and mica
Granite is a ternary rock composed primarily of quartz, alkali feldspar, plagioclase, and mica (biotite/muscovite).
Question 18
Granite, a commonly used building stone, is an example of a(n)
igneous rock
sedimentary rock
metamorphic rock
purely artificial (manufactured) stone
Show answer & solution
Answer: (A) igneous rock
Granite forms from the cooling of molten magma, making it a classic igneous rock.
Question 19
Hydraulic lime, made from limestone containing a certain proportion of clay (or similar impurities), is characterized by its ability to
set and harden to some degree even under water, or in damp conditions, unlike pure fat lime, due to the presence of some cementitious compounds (similar in nature, though generally weaker, to those in Portland cement)
never set or harden under any conditions whatsoever
achieve a compressive strength far exceeding that of ordinary Portland cement
be manufactured with absolutely no burning (calcination) process required
Show answer & solution
Answer: (A) set and harden to some degree even under water, or in damp conditions, unlike pure fat lime, due to the presence of some cementitious compounds (similar in nature, though generally weaker, to those in Portland cement)
The clay content in hydraulic lime forms weak cementitious compounds, enabling some hydraulic (underwater) setting ability.
Question 20
Igneous rock has
crystalline, glossy or fused texture
foliated structure which is hard and durable
layers of different composition, colour and structure
none of the above
Show answer & solution
Answer: (A) crystalline, glossy or fused texture
Due to their cooling process from a molten state, igneous rocks typically exhibit crystalline, glossy, or glassy textures.
Question 21
In order to dry the quarry sap of a freshly quarried stone, it should be exposed to open air for a period of
one month
four months
six to twelve months
two years
Show answer & solution
Answer: (C) six to twelve months
Seasoning stones by exposing them to open air for 6 to 12 months allows the moisture (quarry sap) to evaporate and harden the stone.
Question 22
Kankar, a naturally occurring impure form of limestone found in some regions, is historically significant mainly as a raw material for the manufacture of
Portland cement exclusively, with no other traditional use
certain traditional forms of lime (used in mortars/plaster), particularly before the widespread availability of Portland cement
glass exclusively
steel, in traditional blast furnace processes
Show answer & solution
Answer: (B) certain traditional forms of lime (used in mortars/plaster), particularly before the widespread availability of Portland cement
Kankar has traditionally been an important raw material for making lime, used in mortars and plaster before cement was widely available.
Question 23
Limestone is physically classified as _____________ rock.
stratified
unstratified
Show answer & solution
Answer: (A) stratified
Limestone is formed in distinct layers or beds resulting from sediment deposition over time, making it physically stratified.
Question 24
Marble and slate, both commonly used as building/decorative stones, are examples of
igneous rocks
sedimentary rocks
metamorphic rocks
purely artificial stones
Show answer & solution
Answer: (C) metamorphic rocks
Marble (from limestone) and slate (from shale) form through metamorphic alteration under heat and pressure.
Question 25
Marble contains mostly lime and silica.
True
False
Show answer & solution
Answer: (A) True
Marble is composed primarily of calcium carbonate with varying mineral impurities such as silica, magnesium, and clay.
Question 26
Marble is an example of
aqueous rock
metamorphic rock
sedimentary rock
igneous rock
Show answer & solution
Answer: (B) metamorphic rock
Marble is formed when limestone undergoes regional or contact metamorphism, recrystallizing its calcite grains.
Question 27
Quarrying of building stone refers to the process of
manufacturing artificial stone from cement and aggregate
extracting (excavating) natural stone from its rock bed/deposit in the earth
polishing and finishing already-extracted stone blocks
transporting finished stone to the construction site, with no reference to extraction
Show answer & solution
Answer: (B) extracting (excavating) natural stone from its rock bed/deposit in the earth
Quarrying is the extraction process, removing natural stone from its rock deposit.
Question 28
Sandstone and limestone, both commonly used building stones, are examples of
igneous rocks
sedimentary rocks
metamorphic rocks exclusively
purely artificial stones
Show answer & solution
Answer: (B) sedimentary rocks
Sandstone and limestone form from deposited and compacted sediments, making them sedimentary rocks.
Question 29
Sandstone consists of
quartz and lime
quartz and silica
quartz, lime and silica
silica, lime and alumina
Show answer & solution
Answer: (C) quartz, lime and silica
Sandstones are clastic sedimentary rocks composed mainly of quartz grains bound together by cementing materials like silica, lime, or iron oxide.
Question 30
Seasoning of stone, similar in concept to seasoning of timber, refers to
allowing freshly quarried stone to dry out and lose its natural quarry moisture before use, which is generally believed to improve its subsequent durability/workability
a chemical treatment applied only to metamorphic stones
a decorative surface treatment applied for color enhancement only
a process applied exclusively to artificial (manufactured) stone, never to natural stone
Show answer & solution
Answer: (A) allowing freshly quarried stone to dry out and lose its natural quarry moisture before use, which is generally believed to improve its subsequent durability/workability
Allowing freshly quarried stone to lose its natural moisture before use is thought to improve its later durability and workability.
Question 31
The attrition test on stones is performed
to determine the crushing strength of the stone
for assessing the resistance of stone to the sun, rain, wind etc.
to ascertain the stability of the stone when exposed to acid fumes
for determining the rate of wear of stone due to grinding action under traffic
Show answer & solution
Answer: (D) for determining the rate of wear of stone due to grinding action under traffic
The attrition test measures how well road stones resist mutual wear and grinding under traffic loads.
Question 32
The calcareous rocks have _____________ as the main constituent.
lime or calcium carbonate
clay or alumina
Show answer & solution
Answer: (A) lime or calcium carbonate
Calcareous rocks (such as limestone and marble) are characterized by calcium carbonate or lime as their predominant chemical constituent.
Question 33
The compressive strength of good quality building stone (such as granite) is generally
very low, similar to that of a first-class brick
considerably higher than that of ordinary bricks, often well above 100 N/mm2 for strong stones like granite
exactly zero, since stone has no measurable compressive strength
irrelevant to its suitability for construction
Show answer & solution
Answer: (B) considerably higher than that of ordinary bricks, often well above 100 N/mm2 for strong stones like granite
Strong building stones like granite have compressive strength far exceeding typical bricks, often over 100 N/mm2.
Question 34
The compressive strength of granite is
50 to 70 MN/m²
70 to 130 MN/m²
130 to 170 MN/m²
170 to 200 MN/m²
Show answer & solution
Answer: (C) 130 to 170 MN/m²
Granite is an extremely dense and strong igneous rock with a typical crushing strength ranging between 130 and 170 MN/m².
Question 35
The compressive strength of sandstone is
40 MN/m²
55 MN/m²
65 MN/m²
80 MN/m²
Show answer & solution
Answer: (C) 65 MN/m²
Standard building sandstones exhibit an average crushing compressive strength of approximately 65 MN/m².
Question 36
The dressing of stone is done
immediately after quarrying
after seasoning
after three months of quarrying
just before building
Show answer & solution
Answer: (A) immediately after quarrying
Dressing stones immediately after quarrying is easiest because the stone still contains quarry sap and is softer to work.
Question 37
The rocks formed due to alteration of original structure under heat and excessive pressure are called metamorphic rocks.
Agree
Disagree
Show answer & solution
Answer: (A) Agree
Metamorphism involves the transformation of existing rocks (igneous or sedimentary) due to intense heat, pressure, and chemically active fluids.
Question 38
The rocks formed due to solidification of molten mass lying below or above the earth surface are called
aqueous rocks
sedimentary rocks
metamorphic rocks
igneous rocks
Show answer & solution
Answer: (D) igneous rocks
Igneous rocks are formed by the cooling and solidification of molten magma or lava, either beneath the earth's surface (intrusive) or on the surface (extrusive).
Question 39
The sedimentary rocks are formed due to
solidification of molten mass lying below or above the earth surface
gradual deposition of materials like sand, clay, etc., generally by setting water
alteration of original structure under heat and excessive pressure
none of the above
Show answer & solution
Answer: (B) gradual deposition of materials like sand, clay, etc., generally by setting water
Sedimentary rocks are formed through the accumulation, compaction, and cementation of mineral or organic particles (sediments) deposited by water, wind, or ice.
Question 40
The silicious sandstone which has been subjected to metamorphic action is called
moorum
laterite
quartzite
dolomite
Show answer & solution
Answer: (C) quartzite
Quartzite is formed when quartz-rich sandstone undergoes thermal or regional metamorphism, fusing the sand grains into an extremely hard rock.
Question 41
The specific gravity of most common building stones (such as granite or good quality sandstone/limestone) generally falls in the approximate range of
0.5 to 1.0
2.4 to 2.8 (varying by stone type)
5.0 to 6.0
10.0 or higher
Show answer & solution
Answer: (B) 2.4 to 2.8 (varying by stone type)
Typical dense building stones have specific gravity in roughly the 2.4-2.8 range.
Question 42
The specific gravity of sandstone is
1.1 to 1.8
1.8 to 2.65
2.65 to 2.95
2.95 to 3.4
Show answer & solution
Answer: (C) 2.65 to 2.95
Quartz-rich sandstones have specific gravities typically ranging between 2.65 and 2.95.
Question 43
The specific gravity of stone should not, in any case, be less than
1
1.5
2
2.5
Show answer & solution
Answer: (D) 2.5
Good structural stones possess a specific gravity of at least 2.5 to ensure adequate density, strength, and durability.
Question 44
The stone used for the construction of curved or ornamental work should be soft.
Right
Wrong
Show answer & solution
Answer: (A) Right
Softer stones like certain marbles or soft sandstones can be carved and dressed easily into intricate architectural ornaments.
Question 45
Water absorption of a good quality building stone should generally be
as high as possible, since higher absorption indicates better quality
reasonably low, since excessive water absorption can indicate porosity, and can adversely affect the stone's durability and weather resistance
irrelevant, since stone is never exposed to water in construction
always exactly zero, with no stone accepted otherwise
Show answer & solution
Answer: (B) reasonably low, since excessive water absorption can indicate porosity, and can adversely affect the stone's durability and weather resistance
Low water absorption in stone indicates lower porosity and generally better weathering durability.
Question 46
Weathering resistance (durability) of a building stone refers to its ability to resist
compressive loading only, with no reference to environmental exposure
the disintegrating effects of exposure to atmospheric agents, such as rain, frost, temperature variation, and pollutants, over time
fire exposure only
magnetic influence, with no other consideration
Show answer & solution
Answer: (B) the disintegrating effects of exposure to atmospheric agents, such as rain, frost, temperature variation, and pollutants, over time
Weathering resistance concerns a stone's ability to withstand long-term atmospheric and environmental exposure.
Question 47
Slate in the form of tiles is used
for paving
as road metal
as an excellent roof covering material
for the manufacture of cement
Show answer & solution
Answer: (C) as an excellent roof covering material
Slate possesses a fine foliation (slaty cleavage) allowing it to be split into thin, durable sheets ideal for roofing.
More Civil Engineering Building Materials practice