What is a steam turbine?
Show answer & solution
Answer: (D) A prime mover in which the energy of steam is converted into mechanical work by expanding it through nozzles and moving blades
It drives generators in thermal and nuclear power plants.
Mechanical Engineering · Power Plant Engineering
35 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a steam turbine?
Answer: (D) A prime mover in which the energy of steam is converted into mechanical work by expanding it through nozzles and moving blades
It drives generators in thermal and nuclear power plants.
What is the main difference between impulse and reaction turbines?
Answer: (C) In impulse turbines, steam expands only in nozzles; in reaction turbines, it expands in both fixed and moving blades
In impulse turbines, pressure stays constant across moving blades.
What is a De Laval turbine?
Answer: (A) A simple single-stage impulse turbine
It runs at very high speed.
What is a Parsons turbine?
Answer: (B) A reaction turbine, usually with 50% degree of reaction
Fixed and moving blades have the same shape.
What is the degree of reaction of a turbine stage?
Answer: (C) The ratio of enthalpy drop in the moving blades to the total enthalpy drop in the stage
An impulse turbine has zero degree of reaction.
Why is compounding used in steam turbines?
Answer: (D) To reduce the rotor speed to a practical value by dividing the enthalpy drop into stages
A single stage would spin far too fast.
What is pressure compounding?
Answer: (A) Dividing the pressure drop among several stages, each with a set of nozzles and moving blades
The Rateau turbine is pressure compounded.
What is velocity compounding?
Answer: (B) Expanding steam in one set of nozzles and absorbing its high velocity in several rows of moving blades with fixed guide blades between them
The Curtis turbine is velocity compounded.
What is the condition for maximum blade efficiency of a single-stage impulse turbine?
Answer: (D) Blade speed ratio u/V = cos α / 2
α is the nozzle angle.
What is the shape of a nozzle used to accelerate steam to supersonic speed?
Answer: (C) Convergent–divergent
Flow becomes sonic at the throat.
What is the approximate critical pressure ratio for superheated steam flowing through a nozzle?
Answer: (B) About 0.546
For dry saturated steam, it is about 0.577.
What are the methods of governing steam turbines?
Answer: (D) Throttle governing, nozzle governing and bypass governing
Governing keeps speed constant under changing load.
What is the function of a condenser in a steam power plant?
Answer: (C) To condense exhaust steam at low pressure, increasing turbine work and recovering pure water
Low back pressure increases the enthalpy drop in the turbine.
What is a surface condenser?
Answer: (A) A condenser in which steam and cooling water do not mix, being separated by tube walls
The condensate can be reused as boiler feed water.
What is a jet condenser?
Answer: (D) A condenser in which exhaust steam mixes directly with cooling water
The condensate cannot be reused directly as feed water.
Why is an air extraction pump or ejector fitted to a condenser?
Answer: (C) To remove air and non-condensable gases that would raise condenser pressure and reduce heat transfer
Steam jet ejectors are commonly used.
What is vacuum efficiency of a condenser?
Answer: (B) The ratio of actual vacuum to the ideal vacuum possible at the condensate temperature
Air leakage lowers vacuum efficiency.
What is a cooling tower?
Answer: (A) A structure that cools circulating condenser water by partial evaporation into air
It allows cooling water to be reused.
What is a natural draught cooling tower?
Answer: (D) A tall hyperbolic tower in which air flow is created by the density difference of warm, moist air
It is used in very large power stations.
What is a mechanical draught cooling tower?
Answer: (C) A cooling tower in which fans move air through the tower
Fans may be forced or induced draught.
What is the range of a cooling tower?
Answer: (A) The difference between the inlet and outlet temperatures of the circulating water
It shows how much the water is cooled.
What is the approach of a cooling tower?
Answer: (B) The difference between the outlet water temperature and the wet-bulb temperature of the air
Water cannot be cooled below the wet-bulb temperature.
What is the purpose of feed water heaters in a steam power plant?
Answer: (B) To heat feed water with steam bled from the turbine, improving cycle efficiency
This is regenerative feed heating.
What is the purpose of reheating in a steam power plant?
Answer: (C) To reheat partly expanded steam to reduce moisture in the turbine and increase work output
Steam returns to the boiler after the high-pressure turbine.
What is the effect of moisture in steam on turbine blades?
Answer: (D) It causes erosion of blades, especially in the last stages
Steam dryness at exhaust is usually kept above about 88%.
What is a back-pressure turbine?
Answer: (A) A turbine that exhausts steam at a pressure above atmospheric for use in process heating
It is used in cogeneration plants such as sugar mills.
What is cogeneration (combined heat and power)?
Answer: (C) Producing electricity and useful heat together from the same fuel
It gives much higher overall fuel use efficiency.
Why are sugar mills in Pakistan well suited to cogeneration?
Answer: (B) They burn bagasse to raise steam for both electricity and process heat
Surplus electricity can be supplied to the grid.
What is the typical overall efficiency of a modern coal-fired steam power plant?
Answer: (B) About 35–45%
Supercritical and ultra-supercritical plants are at the upper end.
Which part of a thermal power plant rejects the largest amount of heat?
Answer: (D) The condenser
Most of the fuel's heat leaves in the cooling water.
What is the purpose of a turbine bleeding system?
Answer: (C) Extracting steam at intermediate stages to heat feed water
It is part of regenerative heating.
What is a turbo-generator?
Answer: (D) A steam (or gas) turbine directly coupled to an electric generator
Large units in Pakistan run at 3000 rpm for 50 Hz.
Why do large turbo-generators in Pakistan run at 3000 rpm?
Answer: (A) A two-pole generator must run at 3000 rpm to produce 50 Hz
N = 120f/P = 120 × 50 ÷ 2.
What is the purpose of a hot well in a steam plant?
Answer: (B) To collect condensate from the condenser before it is pumped back to the boiler
It is located below the condenser.
What is the effect of air leakage into a condenser?
Answer: (D) It raises condenser pressure and reduces turbine output
Air ejectors remove air continuously.