What is a boiler (steam generator)?
Show answer & solution
Answer: (D) A closed vessel in which water is heated by burning fuel to produce steam under pressure
Steam is then used for power or process heating.
Mechanical Engineering · Power Plant Engineering
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a boiler (steam generator)?
Answer: (D) A closed vessel in which water is heated by burning fuel to produce steam under pressure
Steam is then used for power or process heating.
What is a fire-tube boiler?
Answer: (B) A boiler in which hot gases pass through tubes surrounded by water
Fire-tube boilers suit low pressures and small capacities.
What is a water-tube boiler?
Answer: (C) A boiler in which water flows inside tubes heated externally by hot gases
Water-tube boilers suit high pressures and large capacities.
Which of the following is a fire-tube boiler?
Answer: (A) Lancashire boiler
Cochran, Cornish and locomotive boilers are also fire-tube boilers.
Which of the following is a water-tube boiler?
Answer: (C) Babcock and Wilcox boiler
Stirling and La Mont boilers are also water-tube types.
How many flue tubes does a Lancashire boiler have?
Answer: (B) Two
A Cornish boiler has only one flue tube.
What type of boiler is a Cochran boiler?
Answer: (A) A vertical multi-tubular fire-tube boiler
It is compact and used for small steam needs.
Why are water-tube boilers preferred in modern power stations?
Answer: (D) They can generate steam at high pressure and high rates, and respond quickly to load changes
Their small-diameter tubes withstand high pressures.
What is a Benson boiler?
Answer: (B) A once-through, drumless boiler that can operate at supercritical pressure
Water is converted into steam in a single pass through tubes.
What is a La Mont boiler?
Answer: (A) A forced-circulation water-tube boiler using a pump to circulate water
Forced circulation allows smaller tubes and higher pressures.
What is a supercritical boiler?
Answer: (C) A boiler operating above the critical pressure of water (about 221 bar), where there is no distinct boiling
Supercritical units achieve higher efficiency, such as at the Sahiwal coal power plant.
What are boiler mountings?
Answer: (D) Fittings mounted on a boiler for its safe operation and control
Safety valves, water level indicators and pressure gauges are mountings.
What are boiler accessories?
Answer: (B) Auxiliary devices that improve the efficiency and performance of a boiler
Economisers, superheaters and air preheaters are accessories.
What is the function of a safety valve on a boiler?
Answer: (D) To release steam automatically when pressure exceeds the safe working limit
Common types are spring-loaded, dead-weight and lever safety valves.
What is the function of a fusible plug?
Answer: (C) To melt and release steam onto the fire when the water level falls dangerously low, preventing overheating
It is a safety mounting fitted in the furnace crown.
What is the function of a water level indicator on a boiler?
Answer: (A) To show the level of water inside the boiler
Low water level can damage the boiler.
What is the function of a blow-off cock?
Answer: (D) To remove sediment and sludge from the bottom of the boiler and to empty it
It is usually fitted at the lowest point.
What is the function of a feed check valve?
Answer: (A) To allow feed water into the boiler while preventing back flow
It is a non-return valve on the feed line.
What is the function of a steam stop valve?
Answer: (C) To control the flow of steam from the boiler to the steam pipe
It is fitted on the highest part of the boiler shell.
What is the function of an economiser?
Answer: (B) To preheat feed water using heat from the flue gases
It raises boiler efficiency.
What is the function of an air preheater?
Answer: (A) To heat combustion air using heat from the flue gases
Hot air improves combustion and boiler efficiency.
What is the function of a superheater?
Answer: (B) To raise the temperature of saturated steam above its saturation temperature
Superheated steam increases turbine efficiency and reduces blade erosion.
What is boiler draught?
Answer: (C) The pressure difference needed to supply air to the furnace and remove flue gases through the chimney
Draught may be natural or artificial.
How is natural draught produced?
Answer: (D) By a chimney, due to the difference in density between hot flue gases inside and cooler air outside
Taller chimneys produce more draught.
What is forced draught?
Answer: (C) Draught produced by a fan that blows air into the furnace, keeping it above atmospheric pressure
The fan handles cool air, so it is smaller.
What is induced draught?
Answer: (B) Draught produced by a fan at the base of the chimney that sucks flue gases out, keeping the furnace below atmospheric pressure
The fan handles hot gases, so it is larger.
What is balanced draught?
Answer: (D) A combination of forced and induced draught that keeps furnace pressure close to atmospheric
It is used in large modern boilers.
What is the main advantage of artificial (mechanical) draught over natural draught?
Answer: (A) It is independent of weather and chimney height and can be easily controlled
Large boilers need far more draught than a chimney can give.
What is the equivalent evaporation of a boiler?
Answer: (A) The amount of water evaporated from and at 100 °C that would need the same heat as the actual evaporation
It allows boilers to be compared on a common basis.
What is boiler efficiency?
Answer: (B) The ratio of heat used in producing steam to the heat released by the fuel burned
Modern large boilers exceed 85% efficiency.
Why must boiler feed water be treated?
Answer: (C) To prevent scale formation, corrosion and foaming caused by impurities
Scale reduces heat transfer and can cause tube failure.
What is the purpose of deaeration of feed water?
Answer: (D) To remove dissolved oxygen and carbon dioxide that cause corrosion
A deaerator heats water with steam to drive out gases.
What is priming in a boiler?
Answer: (A) The carrying of water droplets along with steam into the steam pipe
It is caused by high water level and rapid steam generation.
What is foaming in a boiler?
Answer: (C) The formation of bubbles on the water surface due to oil, grease or dissolved salts
It can lead to priming.
What is caustic embrittlement?
Answer: (D) Cracking of boiler steel caused by highly alkaline water concentrating at stressed areas such as seams
It is prevented by controlling water chemistry.
What is fluidised bed combustion?
Answer: (B) Burning fuel in a bed of particles kept suspended by upward-flowing air
Limestone in the bed captures sulphur dioxide, and low temperatures reduce NOx.
What is the main advantage of pulverised coal firing?
Answer: (A) High combustion efficiency and quick response to load changes
Coal is ground to a fine powder and burned in suspension.
What is a mechanical stoker?
Answer: (B) A device that feeds coal onto a grate automatically
Chain-grate and spreader stokers are examples.