Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Power Plant Engineering: Fuels and Pollution Control

Mechanical Engineering · Power Plant Engineering

31 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What are the main ranks of coal in order of increasing carbon content?

  1. Peat, lignite, bituminous and anthracite
  2. Anthracite, bituminous, lignite and peat
  3. Bituminous, peat, lignite and anthracite
  4. Lignite, peat, anthracite and bituminous
Show answer & solution

Answer: (A) Peat, lignite, bituminous and anthracite

Anthracite has the highest carbon and calorific value.

Question 2

Which coal has the highest carbon content and burns with little smoke?

  1. Peat
  2. Lignite
  3. Sub-bituminous coal
  4. Anthracite
Show answer & solution

Answer: (D) Anthracite

It is hard and difficult to ignite.

Question 3

What type of coal is found in the Thar coalfield of Sindh?

  1. Bituminous coal of the highest grade
  2. Anthracite
  3. Lignite
  4. Graphite
Show answer & solution

Answer: (C) Lignite

It has high moisture and is used in mine-mouth power plants.

Question 4

What does proximate analysis of coal determine?

  1. Moisture, volatile matter, fixed carbon and ash
  2. Calorific value only
  3. Density only
  4. Carbon, hydrogen, nitrogen, sulphur and oxygen
Show answer & solution

Answer: (A) Moisture, volatile matter, fixed carbon and ash

It is simpler than ultimate analysis.

Question 5

What does ultimate analysis of coal determine?

  1. Calorific value only
  2. Moisture and volatile matter only
  3. The percentages of carbon, hydrogen, nitrogen, sulphur and oxygen
  4. Ash and fixed carbon only
Show answer & solution

Answer: (C) The percentages of carbon, hydrogen, nitrogen, sulphur and oxygen

It is used for combustion calculations.

Question 6

Which instrument is used to measure the calorific value of solid and liquid fuels?

  1. Orsat apparatus
  2. Bomb calorimeter
  3. Pitot tube
  4. Junkers gas calorimeter
Show answer & solution

Answer: (B) Bomb calorimeter

Junkers calorimeter is used for gaseous fuels.

Question 7

What does an Orsat apparatus measure?

  1. The composition of flue gases (CO₂, O₂ and CO)
  2. The calorific value of coal
  3. The ash content
  4. The moisture in coal
Show answer & solution

Answer: (A) The composition of flue gases (CO₂, O₂ and CO)

It helps check whether combustion is complete.

Question 8

Why is excess air supplied for combustion in boilers?

  1. To reduce efficiency deliberately
  2. To increase smoke
  3. To cool the boiler
  4. To ensure complete combustion of fuel
Show answer & solution

Answer: (D) To ensure complete combustion of fuel

Too much excess air increases heat loss in flue gases.

Question 9

What is fly ash?

  1. Unburned coal lumps
  2. Fine ash particles carried with the flue gases
  3. Slag on boiler tubes
  4. Ash left on the grate
Show answer & solution

Answer: (B) Fine ash particles carried with the flue gases

It is removed by electrostatic precipitators or bag filters.

Question 10

What is an electrostatic precipitator (ESP)?

  1. A device that removes fine dust particles from flue gases using high-voltage electric charges
  2. A coal crusher
  3. A device that removes sulphur dioxide
  4. A cooling tower
Show answer & solution

Answer: (A) A device that removes fine dust particles from flue gases using high-voltage electric charges

It can remove more than 99% of fly ash.

Question 11

What is flue gas desulphurisation (FGD)?

  1. Removal of ash
  2. Removal of water
  3. Removal of nitrogen
  4. Removal of sulphur dioxide from flue gases, usually by scrubbing with limestone slurry
Show answer & solution

Answer: (D) Removal of sulphur dioxide from flue gases, usually by scrubbing with limestone slurry

The product is often gypsum.

Question 12

How can NOx emissions from coal-fired boilers be reduced?

  1. By adding more excess air at high temperature
  2. By burning more fuel
  3. By using low-NOx burners, staged combustion and lower flame temperatures
  4. By using taller chimneys only
Show answer & solution

Answer: (C) By using low-NOx burners, staged combustion and lower flame temperatures

Selective catalytic reduction (SCR) is also used.

Question 13

What is the main purpose of a coal handling plant in a power station?

  1. To dispose of ash
  2. To clean flue gases
  3. To burn coal
  4. To receive, store, crush and convey coal to the boilers
Show answer & solution

Answer: (D) To receive, store, crush and convey coal to the boilers

Coal may arrive by rail, ship or conveyor.

Question 14

What is the purpose of coal pulverising mills?

  1. To grind coal into a fine powder for pulverised fuel firing
  2. To store coal
  3. To wash coal
  4. To cool coal
Show answer & solution

Answer: (A) To grind coal into a fine powder for pulverised fuel firing

Ball mills and bowl mills are common types.

Question 15

What is slagging in boilers?

  1. Formation of scale inside tubes
  2. Corrosion of the chimney
  3. Molten or sticky ash deposits forming on furnace walls and tubes
  4. Leaking of steam
Show answer & solution

Answer: (C) Molten or sticky ash deposits forming on furnace walls and tubes

It reduces heat transfer.

Question 16

What is the purpose of soot blowers?

  1. To supply combustion air
  2. To remove soot and ash deposits from boiler tubes using jets of steam or air
  3. To cool the boiler
  4. To feed coal
Show answer & solution

Answer: (B) To remove soot and ash deposits from boiler tubes using jets of steam or air

Clean tubes transfer heat better.

Question 17

Why is a tall chimney used in power stations?

  1. To produce draught and disperse flue gases high into the atmosphere
  2. To increase boiler pressure
  3. To condense steam
  4. To store coal
Show answer & solution

Answer: (A) To produce draught and disperse flue gases high into the atmosphere

It reduces ground-level pollution concentration.

Question 18

What is the main pollutant gas produced from sulphur in coal?

  1. Methane
  2. Carbon monoxide
  3. Sulphur dioxide
  4. Ozone
Show answer & solution

Answer: (C) Sulphur dioxide

It causes acid rain.

Question 19

Which greenhouse gas is the main product of burning fossil fuels in power plants?

  1. Oxygen
  2. Argon
  3. Nitrogen
  4. Carbon dioxide
Show answer & solution

Answer: (D) Carbon dioxide

Its emissions per unit of electricity are highest for coal.

Question 20

What is the gross (higher) calorific value of a fuel?

  1. The total heat released by complete combustion, including the latent heat of water vapour formed
  2. The heat without latent heat
  3. The heat lost in chimney gases
  4. The heat of the ash
Show answer & solution

Answer: (A) The total heat released by complete combustion, including the latent heat of water vapour formed

The net value excludes the latent heat.

Question 21

What is the volatile matter in coal?

  1. The fixed carbon
  2. The part of coal that is driven off as gas when coal is heated in the absence of air
  3. The ash content
  4. The moisture
Show answer & solution

Answer: (B) The part of coal that is driven off as gas when coal is heated in the absence of air

High-volatile coals ignite easily.

Question 22

What is fixed carbon in coal?

  1. The sulphur content
  2. The total carbon
  3. The ash content
  4. The solid combustible part remaining after volatile matter and moisture are removed, excluding ash
Show answer & solution

Answer: (D) The solid combustible part remaining after volatile matter and moisture are removed, excluding ash

It contributes most of the heat in high-grade coals.

Question 23

Why is high ash content in coal undesirable?

  1. It improves combustion
  2. It reduces wear
  3. It lowers calorific value, increases handling and disposal costs and causes erosion and slagging
  4. It increases calorific value
Show answer & solution

Answer: (C) It lowers calorific value, increases handling and disposal costs and causes erosion and slagging

Pakistani lignites often have high moisture and ash.

Question 24

What is a mine-mouth power plant?

  1. A nuclear plant
  2. A power plant located at the coal mine, avoiding long transport of low-grade coal
  3. A hydro plant
  4. A plant at a port using imported coal
Show answer & solution

Answer: (B) A power plant located at the coal mine, avoiding long transport of low-grade coal

Thar coal plants are mine-mouth plants.

Question 25

What are bag filters (fabric filters) used for in power plants?

  1. Removing fine dust particles from flue gases by filtering through fabric bags
  2. Removing sulphur dioxide
  3. Storing ash
  4. Cooling flue gases
Show answer & solution

Answer: (A) Removing fine dust particles from flue gases by filtering through fabric bags

They are very efficient for fine particles.

Question 26

What is the main method of disposing of fly ash usefully?

  1. Mixing it with fuel oil
  2. Burning it again as fuel
  3. Dumping it into rivers
  4. Using it in cement and concrete production
Show answer & solution

Answer: (D) Using it in cement and concrete production

Fly ash can replace part of the cement in concrete.

Question 27

What is a cyclone separator?

  1. A steam separator only
  2. A device that removes sulphur
  3. A device that removes larger dust particles from gases by centrifugal action
  4. A coal crusher
Show answer & solution

Answer: (C) A device that removes larger dust particles from gases by centrifugal action

It is often used before an electrostatic precipitator.

Question 28

What is natural gas mainly composed of?

  1. Propane
  2. Hydrogen
  3. Carbon monoxide
  4. Methane
Show answer & solution

Answer: (D) Methane

Pakistan uses natural gas and imported LNG in many power plants.

Question 29

What is LNG?

  1. Natural gas cooled to about −162 °C to become a liquid for easy transport
  2. Lignite
  3. Light naphtha
  4. Liquefied petroleum gas
Show answer & solution

Answer: (A) Natural gas cooled to about −162 °C to become a liquid for easy transport

Pakistan imports LNG through terminals at Port Qasim.

Question 30

What is furnace oil?

  1. A light gas
  2. A biofuel only
  3. A heavy residual petroleum fuel used in boilers and power plants
  4. A type of coal
Show answer & solution

Answer: (C) A heavy residual petroleum fuel used in boilers and power plants

It has high sulphur content in many grades.

Question 31

What is the purpose of an ash handling system?

  1. To feed coal
  2. To collect and remove bottom ash and fly ash from the boiler and dispose of it
  3. To clean steam
  4. To supply water
Show answer & solution

Answer: (B) To collect and remove bottom ash and fly ash from the boiler and dispose of it

Hydraulic and pneumatic systems are common.

Practice these 31 questions interactively →