Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Power Plant Engineering: Gas Turbines and Renewables

Mechanical Engineering · Power Plant Engineering

27 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

On which thermodynamic cycle does a gas turbine power plant work?

  1. Diesel cycle
  2. Brayton (Joule) cycle
  3. Otto cycle
  4. Rankine cycle
Show answer & solution

Answer: (B) Brayton (Joule) cycle

Air is compressed, heated by combustion and expanded in a turbine.

Question 2

What are the main components of a simple open-cycle gas turbine plant?

  1. Reactor, steam generator and turbine
  2. Penstock, turbine and draft tube
  3. Boiler, condenser and pump
  4. Compressor, combustion chamber and turbine
Show answer & solution

Answer: (D) Compressor, combustion chamber and turbine

The turbine also drives the compressor.

Question 3

What fraction of the turbine work in a gas turbine plant is typically used to drive the compressor?

  1. About 5%
  2. About half to two-thirds
  3. None
  4. All of it
Show answer & solution

Answer: (B) About half to two-thirds

This is why gas turbines have a low work ratio.

Question 4

What are the advantages of gas turbine power plants?

  1. Quick starting, compact size, low capital cost and little cooling water need
  2. Very slow starting
  3. Use of solid coal only
  4. Very high efficiency in simple cycle
Show answer & solution

Answer: (A) Quick starting, compact size, low capital cost and little cooling water need

They are well suited to peak load and standby duty.

Question 5

How can the efficiency of a gas turbine plant be improved?

  1. By removing the combustion chamber
  2. By increasing compressor losses
  3. By reducing turbine inlet temperature
  4. By regeneration, intercooling and reheating
Show answer & solution

Answer: (D) By regeneration, intercooling and reheating

Combined cycle operation gives the greatest improvement.

Question 6

What is a combined cycle power plant?

  1. A nuclear and hydro plant together
  2. A plant burning coal and gas in one boiler
  3. A plant in which exhaust heat from a gas turbine produces steam in a heat recovery steam generator for a steam turbine
  4. A diesel plant with two engines
Show answer & solution

Answer: (C) A plant in which exhaust heat from a gas turbine produces steam in a heat recovery steam generator for a steam turbine

Combined cycle plants can exceed 60% efficiency.

Question 7

What is a heat recovery steam generator (HRSG)?

  1. A cooling tower
  2. A condenser
  3. A coal-fired boiler
  4. A boiler that uses the hot exhaust of a gas turbine to raise steam
Show answer & solution

Answer: (D) A boiler that uses the hot exhaust of a gas turbine to raise steam

It is the link between gas and steam cycles.

Question 8

Where are diesel power plants mainly used?

  1. For very large base load stations
  2. For standby, emergency and small isolated supplies
  3. For nuclear plants
  4. For pumped storage
Show answer & solution

Answer: (B) For standby, emergency and small isolated supplies

They start quickly and need little space.

Question 9

How does the power available from wind vary with wind speed?

  1. It is proportional to the cube of wind speed
  2. It is proportional to wind speed
  3. It is independent of speed
  4. It is proportional to the square root of speed
Show answer & solution

Answer: (A) It is proportional to the cube of wind speed

P = ½ρAv³.

Question 10

What is the Betz limit for wind turbines?

  1. About 10%
  2. About 59.3% of the wind's kinetic energy is the maximum that can be extracted
  3. About 90%
  4. 100%
Show answer & solution

Answer: (B) About 59.3% of the wind's kinetic energy is the maximum that can be extracted

Practical turbines achieve about 35–45%.

Question 11

Which area of Pakistan is known as a major wind energy corridor?

  1. Thar desert only
  2. Swat valley
  3. Quetta valley
  4. Jhimpir–Gharo in Sindh
Show answer & solution

Answer: (D) Jhimpir–Gharo in Sindh

Many wind farms operate there.

Question 12

What is a solar photovoltaic cell?

  1. A device that heats water
  2. A mirror that focuses sunlight
  3. A semiconductor device that converts sunlight directly into electricity
  4. A battery
Show answer & solution

Answer: (C) A semiconductor device that converts sunlight directly into electricity

Silicon is the most common PV material.

Question 13

Where is the Quaid-e-Azam Solar Park located?

  1. Bahawalpur, Punjab
  2. Quetta
  3. Karachi
  4. Peshawar
Show answer & solution

Answer: (A) Bahawalpur, Punjab

It is one of Pakistan's largest solar power projects.

Question 14

What is concentrated solar power (CSP)?

  1. Geothermal power
  2. Direct conversion of sunlight to electricity in cells
  3. Using mirrors to concentrate sunlight to heat a fluid that drives a turbine
  4. Wind power
Show answer & solution

Answer: (C) Using mirrors to concentrate sunlight to heat a fluid that drives a turbine

Parabolic troughs and solar towers are CSP technologies.

Question 15

What is geothermal energy?

  1. Energy from the Sun
  2. Energy from wind
  3. Energy from tides
  4. Heat from inside the Earth used for power generation or heating
Show answer & solution

Answer: (D) Heat from inside the Earth used for power generation or heating

It is used where hot rocks are near the surface.

Question 16

What is a fuel cell?

  1. A battery that cannot be recharged
  2. A type of turbine
  3. A device that converts chemical energy of a fuel such as hydrogen directly into electricity
  4. A solar collector
Show answer & solution

Answer: (C) A device that converts chemical energy of a fuel such as hydrogen directly into electricity

Its by-product with hydrogen is water.

Question 17

What is MHD (magnetohydrodynamic) power generation?

  1. Generating power from water falls
  2. Generating power from wind
  3. Generating power by nuclear fusion
  4. Generating electricity by passing a hot ionised gas through a magnetic field
Show answer & solution

Answer: (D) Generating electricity by passing a hot ionised gas through a magnetic field

It has no moving parts in the generator duct.

Question 18

What is the main reason for the low efficiency of a simple open-cycle gas turbine?

  1. Use of steam
  2. Low compressor work
  3. Very high pressure ratio
  4. High exhaust temperature carries away much of the heat
Show answer & solution

Answer: (D) High exhaust temperature carries away much of the heat

Combined cycles recover this exhaust heat.

Question 19

What is the main fuel used in gas turbine power plants in Pakistan?

  1. Natural gas or imported LNG
  2. Bagasse
  3. Uranium
  4. Coal
Show answer & solution

Answer: (A) Natural gas or imported LNG

High-speed diesel is used as backup in some plants.

Question 20

What type of compressor is used in large gas turbines?

  1. Screw compressor
  2. Multi-stage axial-flow compressor
  3. Single-stage centrifugal fan only
  4. Reciprocating compressor
Show answer & solution

Answer: (B) Multi-stage axial-flow compressor

Axial compressors handle large air flows efficiently.

Question 21

What limits the maximum turbine inlet temperature of a gas turbine?

  1. The fuel type
  2. The generator speed
  3. The strength of turbine blade materials at high temperature
  4. The compressor size
Show answer & solution

Answer: (C) The strength of turbine blade materials at high temperature

Blade cooling and coatings allow higher temperatures.

Question 22

Why is a diesel power plant suitable for standby service in hospitals and industries?

  1. It needs a large water supply
  2. It starts quickly and can take load within seconds
  3. It has the lowest fuel cost
  4. It takes days to start
Show answer & solution

Answer: (B) It starts quickly and can take load within seconds

It is compact and easy to install.

Question 23

What is tidal power?

  1. Electricity from waves on rivers
  2. Electricity from wind
  3. Electricity generated from the rise and fall of sea tides
  4. Electricity from geothermal heat
Show answer & solution

Answer: (C) Electricity generated from the rise and fall of sea tides

It needs a large tidal range.

Question 24

What is biomass energy?

  1. Energy obtained from organic materials such as wood, crop waste and bagasse
  2. Energy from wind
  3. Energy from coal
  4. Energy from uranium
Show answer & solution

Answer: (A) Energy obtained from organic materials such as wood, crop waste and bagasse

Biogas plants produce methane from animal waste.

Question 25

What is a solar inverter used for in a PV system?

  1. Increasing sunlight
  2. Storing electricity
  3. Cooling panels
  4. Converting DC electricity from solar panels into AC electricity
Show answer & solution

Answer: (D) Converting DC electricity from solar panels into AC electricity

Grid-tied inverters supply power to the grid.

Question 26

What is net metering?

  1. A type of transformer
  2. A system in which a consumer's solar system feeds surplus electricity to the grid and is credited for it
  3. A method of measuring fuel
  4. A tariff for coal plants
Show answer & solution

Answer: (B) A system in which a consumer's solar system feeds surplus electricity to the grid and is credited for it

It is used by rooftop solar users in Pakistan.

Question 27

What is the main disadvantage of solar and wind power?

  1. Their output varies with weather and time of day
  2. They need fuel
  3. They have very high running costs
  4. They produce large CO₂ emissions
Show answer & solution

Answer: (A) Their output varies with weather and time of day

Storage or backup capacity is needed.

Practice these 27 questions interactively →