What is nuclear fission?
Show answer & solution
Answer: (B) The splitting of a heavy nucleus, such as uranium-235, into lighter nuclei with release of energy and neutrons
About 200 MeV is released per fission.
Mechanical Engineering · Power Plant Engineering
34 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is nuclear fission?
Answer: (B) The splitting of a heavy nucleus, such as uranium-235, into lighter nuclei with release of energy and neutrons
About 200 MeV is released per fission.
What percentage of natural uranium is the fissile isotope uranium-235?
Answer: (A) About 0.7%
Most natural uranium is uranium-238.
What is a chain reaction in a nuclear reactor?
Answer: (C) A self-sustaining series of fissions in which neutrons from one fission cause further fissions
It is controlled by control rods.
What is the function of a moderator in a nuclear reactor?
Answer: (D) To slow down fast neutrons so they can cause further fission in uranium-235
Heavy water, graphite and ordinary water are moderators.
What is the function of control rods?
Answer: (D) To absorb neutrons and control the rate of the chain reaction
They are made of boron, cadmium or hafnium.
What is the function of the coolant in a nuclear reactor?
Answer: (A) To remove heat from the reactor core and transfer it to produce steam
Water, heavy water, carbon dioxide and liquid sodium are used.
What is the function of a reflector in a nuclear reactor?
Answer: (C) To reflect escaping neutrons back into the core
It reduces neutron leakage.
What is the function of biological shielding around a reactor?
Answer: (B) To protect people from harmful radiation
Thick concrete is commonly used.
What is a pressurised water reactor (PWR)?
Answer: (C) A reactor in which ordinary water under high pressure acts as coolant and moderator without boiling in the core
Heat is transferred to a secondary circuit in a steam generator.
What is a boiling water reactor (BWR)?
Answer: (B) A reactor in which water boils in the core and the steam goes directly to the turbine
It has a single (direct) cycle.
What is a CANDU (pressurised heavy water) reactor?
Answer: (A) A reactor using natural uranium as fuel and heavy water as moderator and coolant
Pakistan's first nuclear plant at Karachi (KANUPP) was a CANDU-type reactor.
Why can heavy water reactors use natural uranium?
Answer: (D) Heavy water absorbs very few neutrons, so enough neutrons remain for a chain reaction
Light water reactors need enriched uranium.
What is a fast breeder reactor?
Answer: (D) A reactor that uses fast neutrons and produces more fissile fuel than it consumes
It converts uranium-238 into plutonium-239.
Which coolant is commonly used in fast breeder reactors?
Answer: (B) Liquid sodium
Sodium does not slow neutrons much and transfers heat very well.
What are fertile materials?
Answer: (C) Materials such as uranium-238 and thorium-232 that can be converted into fissile materials by neutron absorption
Uranium-233 is produced from thorium-232.
What is the multiplication factor (k) of a reactor at critical condition?
Answer: (A) Exactly 1
k < 1 is subcritical and k > 1 is supercritical.
What is critical mass?
Answer: (D) The minimum mass of fissile material needed to sustain a chain reaction
It depends on shape, density and enrichment.
What is the usual enrichment of uranium-235 in fuel for light water reactors?
Answer: (B) About 3–5%
Weapons-grade uranium is highly enriched.
Which organisation operates nuclear power plants in Pakistan?
Answer: (A) Pakistan Atomic Energy Commission (PAEC)
The Pakistan Nuclear Regulatory Authority (PNRA) regulates nuclear safety.
Where is the Chashma nuclear power complex located?
Answer: (C) Near Chashma in Mianwali district, Punjab, on the Indus River
It has several pressurised water reactors.
What type of reactors are the K-2 and K-3 units at Karachi?
Answer: (C) Hualong One pressurised water reactors of about 1100 MW each
They began commercial operation in 2021 and 2022.
What is a major advantage of nuclear power plants?
Answer: (A) They produce large amounts of power from small amounts of fuel without carbon dioxide emissions during operation
They are suitable for base load supply.
What is a major problem associated with nuclear power plants?
Answer: (D) Safe disposal of long-lived radioactive waste
Spent fuel must be stored safely for long periods.
What is half-life of a radioactive isotope?
Answer: (B) The time taken for half of its atoms to decay
It ranges from fractions of a second to billions of years.
What is nuclear fusion?
Answer: (A) The joining of light nuclei, such as hydrogen isotopes, to form a heavier nucleus with release of energy
It powers the Sun but is not yet used commercially for electricity.
Why are nuclear power plants mainly used for base load?
Answer: (C) They have high capital cost and low fuel cost, and work best at steady full output
Base-load operation spreads fixed costs over more units.
What are the main components of a nuclear reactor?
Answer: (D) Fuel, moderator, control rods, coolant, reflector and shielding
The reactor vessel contains the core.
What is a steam generator in a PWR?
Answer: (B) A heat exchanger in which hot primary coolant boils secondary water into steam
It keeps radioactive primary water separate from the turbine.
What is the function of the pressuriser in a PWR?
Answer: (A) To maintain high pressure in the primary circuit so water does not boil
It uses electric heaters and water sprays.
What is spent nuclear fuel?
Answer: (C) Fuel removed from a reactor after use, which is highly radioactive
It is first stored in cooling pools.
What is a reactor scram?
Answer: (B) A rapid emergency shutdown of a reactor by inserting control rods
It stops the chain reaction within seconds.
Which materials are used as nuclear fuel cladding?
Answer: (D) Zirconium alloys (zircaloy)
Zirconium absorbs few neutrons and resists corrosion.
What is the main purpose of a containment building?
Answer: (C) To prevent the escape of radioactive materials in an accident
It is a thick reinforced concrete structure.
What is decay heat?
Answer: (A) Heat produced by radioactive decay of fission products after a reactor is shut down
Cooling must continue after shutdown.