What is steady flow?
Show answer & solution
Answer: (C) Flow in which conditions at any point do not change with time
Flow at constant discharge in a pipe is steady.
Mechanical Engineering · Hydraulics & Fluid Mechanics
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is steady flow?
Answer: (C) Flow in which conditions at any point do not change with time
Flow at constant discharge in a pipe is steady.
What is unsteady flow?
Answer: (A) Flow in which conditions at a point change with time
Flow while a valve is being opened or closed is unsteady.
What is uniform flow?
Answer: (B) Flow in which velocity is the same in magnitude and direction at every point at a given instant
Flow through a long straight pipe of constant diameter is uniform.
What is non-uniform flow?
Answer: (A) Flow in which velocity changes from point to point
Flow through a tapering pipe is non-uniform.
What type of flow is gradually varied flow in a channel?
Answer: (D) Steady non-uniform flow
Depth changes gradually along the channel.
What is laminar (streamline) flow?
Answer: (C) Flow in which fluid particles move in smooth layers and their paths do not cross
It occurs at low Reynolds numbers.
What is turbulent flow?
Answer: (D) Flow in which particles move irregularly, with velocities changing in magnitude and direction
Most practical pipe flows are turbulent.
What is one-dimensional flow?
Answer: (A) Flow in which variations across the flow direction are ignored and velocity varies only along one direction
Average velocity across a section is often used.
What is two-dimensional flow?
Answer: (C) Flow in which particles move in parallel planes with the same streamline pattern in each plane
Flow over a long wing is approximately two-dimensional.
What is a streamline?
Answer: (B) An imaginary line whose tangent at any point gives the direction of velocity at that point
There is no flow across a streamline.
What is a streak line?
Answer: (A) The line formed by all fluid particles that have passed through a given point
Dye released from a fixed point forms a streak line.
In steady flow, how are streamlines, pathlines and streaklines related?
Answer: (C) They are identical
In unsteady flow, they can differ.
What is the basis of the continuity equation?
Answer: (D) Conservation of mass
For incompressible flow, A₁V₁ = A₂V₂.
Which equation must the flow of any fluid, ideal or real, satisfy?
Answer: (B) The continuity equation
Mass must always be conserved.
On which conservation law is Bernoulli's equation based?
Answer: (B) Conservation of energy
It equates pressure, kinetic and potential energy heads.
What does Bernoulli's equation state for steady, ideal, incompressible flow along a streamline?
Answer: (C) The sum of pressure head, velocity head and datum head remains constant
p/ρg + V²/2g + z = constant.
What are the dimensions of each term in Bernoulli's equation written in head form?
Answer: (A) Length
Each term represents energy per unit weight (metres of fluid).
What are the main assumptions of Bernoulli's equation?
Answer: (D) Steady, ideal (non-viscous), incompressible flow along a streamline
For real fluids, a head-loss term is added.
What is the velocity of a jet issuing from an opening at depth h below the free surface of a tank, ideally?
Answer: (A) √(2gh)
This is Torricelli's theorem.
What does a pitot tube measure?
Answer: (C) Velocity of flow at a point
It measures stagnation pressure, from which velocity is calculated.
Which instrument is used to measure the speed of aircraft?
Answer: (D) Pitot tube (pitot-static tube)
It is also used for measuring flow in very large pipes.
What is a venturimeter used for?
Answer: (B) Measuring the rate of flow (discharge) in a pipe
It uses Bernoulli's principle with a converging–diverging section.
What is the typical coefficient of discharge of a venturimeter?
Answer: (C) 0.95–0.98
Its gradual shape keeps losses low.
In which orientation can a venturimeter be installed?
Answer: (A) In any orientation: horizontal, vertical or inclined
The differential manometer reading accounts for elevation.
What is an orifice meter?
Answer: (D) A thin plate with a hole placed in a pipe to measure discharge
It is cheaper than a venturimeter but causes larger losses.
What is a rotameter used to measure?
Answer: (B) Flow rate
A float rises in a tapered tube as flow increases.
What does a hot-wire anemometer measure?
Answer: (B) Velocity of a gas
It senses cooling of a heated wire by the flow.
What is the vena contracta?
Answer: (D) The section of a jet where the area is minimum and streamlines are parallel
It lies slightly downstream of an orifice.
What is the coefficient of contraction (Cc) of an orifice?
Answer: (A) The ratio of the area of the jet at vena contracta to the area of the orifice
For a sharp-edged orifice, Cc ≈ 0.64.
How is the coefficient of discharge of an orifice related to the coefficients of contraction and velocity?
Answer: (C) Cd = Cc × Cv
For a sharp-edged orifice, Cd ≈ 0.62.
How does the discharge over a rectangular notch or weir vary with head H?
Answer: (C) Q ∝ H^(3/2)
For a V-notch, Q ∝ H^(5/2).
What is a free vortex?
Answer: (A) A flow in which fluid rotates without external torque, with velocity inversely proportional to radius
Whirlpools are free vortices; radial velocity is zero.
What is a forced vortex?
Answer: (B) A flow in which fluid rotates like a rigid body due to an external torque, with velocity proportional to radius
A liquid in a rotating container forms a forced vortex.
Why is an air vessel or valve provided at the summit of a siphon?
Answer: (D) To remove air that collects there and would interrupt the flow
Pressure at the summit is below atmospheric.
What is the discharge (flow rate) in a pipe?
Answer: (B) The volume of fluid passing a section per unit time
Q = A × V, measured in m³/s.
What is velocity head?
Answer: (D) V²/2g, the kinetic energy per unit weight of fluid
It is one of the three terms in Bernoulli's equation.
What is the coefficient of velocity (Cv) of an orifice?
Answer: (A) The ratio of actual jet velocity at vena contracta to the theoretical velocity
For a sharp-edged orifice, Cv ≈ 0.97–0.98.
What is a mouthpiece?
Answer: (D) A short tube fitted to an orifice to increase discharge
An external cylindrical mouthpiece has Cd ≈ 0.82.