What is buoyancy?
Show answer & solution
Answer: (B) The upward force exerted by a fluid on a body immersed or floating in it
It is also called upthrust.
Mechanical Engineering · Hydraulics & Fluid Mechanics
25 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is buoyancy?
Answer: (B) The upward force exerted by a fluid on a body immersed or floating in it
It is also called upthrust.
What does Archimedes' principle state?
Answer: (D) A body immersed in a fluid experiences an upward force equal to the weight of fluid displaced
It applies to both floating and fully submerged bodies.
What is the centre of buoyancy?
Answer: (C) The centroid of the volume of fluid displaced by the body
The buoyant force acts through this point.
What is the metacentre?
Answer: (A) The point about which a floating body oscillates when slightly tilted
It is where the new buoyancy line meets the body's centre line.
What is metacentric height?
Answer: (D) The distance between the metacentre and the centre of gravity of a floating body
A larger metacentric height means greater stability.
When is a floating body in stable equilibrium?
Answer: (C) When its metacentre is above its centre of gravity
A righting couple then restores the body after tilting.
When is a floating body in neutral equilibrium?
Answer: (B) When the metacentre coincides with the centre of gravity
A disturbed body stays in its new position.
When is a fully submerged body in stable equilibrium?
Answer: (A) When its centre of gravity is below its centre of buoyancy
Submarines must keep their centre of gravity low.
How does increasing the metacentric height affect a floating body's period of rolling?
Answer: (D) The period becomes shorter
Very large metacentric heights make ships roll uncomfortably fast.
Are all floating bodies stable?
Answer: (B) No, stability depends on the positions of the metacentre and centre of gravity
A tall, top-heavy body may capsize.
A wooden block floats with 60% of its volume submerged in water. What is its specific gravity?
Answer: (B) 0.6
Specific gravity = submerged fraction for a body floating in water.
A metal of specific gravity 7 floats in mercury (sp. gr. 13.6). What fraction of its volume is submerged?
Answer: (B) 0.515
7 ÷ 13.6 ≈ 0.515.
A body weighs 3 kg in air and 2.5 kg in water. What is its specific gravity?
Answer: (C) 6
Loss of weight = 0.5 kg; 3 ÷ 0.5 = 6.
A body of mass 7.5 kg and volume 0.01 m³ remains suspended when fully submerged. What is the specific gravity of the fluid?
Answer: (A) 0.75
Fluid density = 7.5/0.01 = 750 kg/m³.
What is a hydrometer used to measure?
Answer: (D) Specific gravity of liquids
It floats deeper in lighter liquids.
Which principle explains why a balloon rises in air?
Answer: (A) Archimedes' principle of buoyancy
The balloon displaces air heavier than itself.
What happens to a spring balance reading when an object hanging from it is lowered into water?
Answer: (C) It decreases by the weight of water displaced
The buoyant force supports part of the weight.
What two forces mainly act on a body floating in equilibrium?
Answer: (D) Buoyancy and gravity
They are equal and opposite and act along the same vertical line.
What is the buoyant force on a body?
Answer: (D) The resultant force exerted on the body by the fluid surrounding it
It acts vertically upwards through the centre of buoyancy.
On what does the buoyant force on a fully submerged body depend?
Answer: (C) The volume of the body and the density of the fluid
Once fully submerged, the buoyant force does not change with depth (for an incompressible fluid).
What happens when a body with the same density as a liquid is placed in it?
Answer: (D) It remains fully submerged at any depth, in neutral buoyancy
Submarines adjust ballast to achieve neutral buoyancy.
Why does a steel ship float even though steel is denser than water?
Answer: (C) Its hollow shape displaces a weight of water equal to its total weight
This is Archimedes' principle in action.
How is the metacentric height of a ship found experimentally?
Answer: (B) By moving a known weight across the deck and measuring the angle of heel
This is called the inclining experiment.
What is the formula for the distance from the centre of buoyancy to the metacentre (BM)?
Answer: (A) I/V, where I is the second moment of the water-plane area and V is the displaced volume
Metacentric height GM = BM − BG.
Why does a ship float higher in sea water than in river water?
Answer: (D) Sea water is denser, so less volume must be displaced
The Plimsoll line on ships shows safe loading levels for different waters.