Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Hydraulics & Fluid Mechanics: Hydraulic Machines (Set 2)

Mechanical Engineering · Hydraulics & Fluid Mechanics

27 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the effect of connecting identical centrifugal pumps in parallel?

  1. Both are reduced
  2. There is no effect
  3. The total discharge increases for the same head
  4. The head increases for the same discharge
Show answer & solution

Answer: (C) The total discharge increases for the same head

Parallel pumps are used where large flows are needed.

Question 2

What is NPSH (net positive suction head)?

  1. The head lost in the delivery pipe
  2. The margin of absolute pressure head at the pump inlet above the vapour pressure head
  3. The total head of the pump
  4. The delivery head of a pump
Show answer & solution

Answer: (B) The margin of absolute pressure head at the pump inlet above the vapour pressure head

Available NPSH must exceed required NPSH to avoid cavitation.

Question 3

What is Thoma's cavitation factor used for?

  1. Calculating specific speed
  2. Measuring discharge
  3. Predicting whether cavitation will occur in turbines and pumps
  4. Measuring efficiency
Show answer & solution

Answer: (C) Predicting whether cavitation will occur in turbines and pumps

It relates suction conditions to the head on the machine.

Question 4

How can cavitation in pumps be reduced?

  1. By running at higher speed
  2. By increasing suction lift
  3. By using longer suction pipes
  4. By reducing suction lift and suction pipe losses so that inlet pressure stays above vapour pressure
Show answer & solution

Answer: (D) By reducing suction lift and suction pipe losses so that inlet pressure stays above vapour pressure

Cavitation-resistant materials such as stainless steel also help.

Question 5

What is a reciprocating pump?

  1. A positive displacement pump in which a piston or plunger moves to and fro in a cylinder
  2. A fan
  3. A turbine
  4. A pump with a rotating impeller
Show answer & solution

Answer: (A) A positive displacement pump in which a piston or plunger moves to and fro in a cylinder

It delivers a fixed volume per stroke.

Question 6

For which conditions is a reciprocating pump most suitable?

  1. Pumping gases only
  2. Very large flows at low head
  3. High head and low discharge
  4. Low head and high discharge
Show answer & solution

Answer: (C) High head and low discharge

Centrifugal pumps are better for large flows.

Question 7

What is the purpose of air vessels in a reciprocating pump?

  1. To lubricate the piston
  2. To prime the pump
  3. To cool the cylinder
  4. To obtain a nearly uniform flow and reduce acceleration head and friction losses
Show answer & solution

Answer: (D) To obtain a nearly uniform flow and reduce acceleration head and friction losses

They are fitted on suction and delivery sides.

Question 8

What is slip in a reciprocating pump?

  1. The difference between theoretical and actual discharge
  2. The loss of lubricant
  3. The difference between suction and delivery heads
  4. The speed of the crank
Show answer & solution

Answer: (A) The difference between theoretical and actual discharge

Negative slip occurs when actual discharge exceeds theoretical discharge.

Question 9

What does the indicator diagram of a reciprocating pump show?

  1. The pump's efficiency curve
  2. The variation of pressure head in the cylinder during one revolution of the crank
  3. The speed of the motor
  4. Discharge against speed
Show answer & solution

Answer: (B) The variation of pressure head in the cylinder during one revolution of the crank

Its area is proportional to the work done.

Question 10

What is a hydraulic ram?

  1. A water turbine
  2. A device that uses the momentum of a large flow of water at low head to lift a small quantity to a greater height
  3. An electric pump
  4. A hydraulic press
Show answer & solution

Answer: (B) A device that uses the momentum of a large flow of water at low head to lift a small quantity to a greater height

It needs no external power.

Question 11

What is a hydraulic accumulator?

  1. A device that stores hydraulic energy under pressure for use when needed
  2. A pressure gauge
  3. A pump
  4. A turbine
Show answer & solution

Answer: (A) A device that stores hydraulic energy under pressure for use when needed

It supplies energy to hydraulic machines with intermittent demand.

Question 12

What is a hydraulic intensifier?

  1. A device that stores water
  2. A turbine
  3. A device that increases the pressure of a liquid above that supplied by a pump
  4. A flow meter
Show answer & solution

Answer: (C) A device that increases the pressure of a liquid above that supplied by a pump

It uses a large piston driving a smaller ram.

Question 13

What is a hydraulic coupling?

  1. A pump casing
  2. A pipe joint
  3. A rigid shaft coupling
  4. A device that transmits power between two shafts through a fluid without mechanical contact
Show answer & solution

Answer: (D) A device that transmits power between two shafts through a fluid without mechanical contact

A torque converter can also multiply torque.

Question 14

What is the overall efficiency of a hydraulic turbine?

  1. The ratio of shaft power output to the water power supplied
  2. The ratio of water power to shaft power
  3. The ratio of speed to power
  4. The ratio of head to discharge
Show answer & solution

Answer: (A) The ratio of shaft power output to the water power supplied

It equals hydraulic efficiency × mechanical efficiency.

Question 15

What is the water power available to a turbine with discharge Q and net head H?

  1. QH/ρ
  2. ρgQH
  3. ρQH
  4. gQ/H
Show answer & solution

Answer: (B) ρgQH

In SI units, P = 9.81 × Q × H kW when Q is in m³/s and H in m.

Question 16

What is the hydraulic efficiency of a turbine?

  1. The ratio of shaft power to runner power
  2. The ratio of speed to power
  3. The ratio of power developed by the runner to the power supplied by water
  4. The ratio of head to discharge
Show answer & solution

Answer: (C) The ratio of power developed by the runner to the power supplied by water

Mechanical efficiency accounts for bearing and friction losses.

Question 17

What is the purpose of a tailrace?

  1. To store water
  2. To carry water away from the turbine after it has passed through
  3. To control speed
  4. To bring water to the turbine
Show answer & solution

Answer: (B) To carry water away from the turbine after it has passed through

Reaction turbines discharge into the tailrace through a draft tube.

Question 18

Which turbine is most likely to be used at a site with a head of 500 m?

  1. Propeller turbine
  2. Bulb turbine
  3. Kaplan turbine
  4. Pelton wheel
Show answer & solution

Answer: (D) Pelton wheel

Very high heads require impulse turbines.

Question 19

Which turbine is most likely to be used at a barrage with a head of about 10 m and large flow?

  1. Kaplan (or bulb) turbine
  2. Francis turbine for very high heads
  3. Turgo wheel
  4. Pelton wheel
Show answer & solution

Answer: (A) Kaplan (or bulb) turbine

Low-head barrage plants need axial-flow turbines.

Question 20

What is the function of a governor in a hydroelectric plant?

  1. Cooling the generator
  2. Keeping the turbine speed constant as the load changes, by regulating water flow
  3. Measuring water level
  4. Increasing water head
Show answer & solution

Answer: (B) Keeping the turbine speed constant as the load changes, by regulating water flow

Constant speed keeps electrical frequency at 50 Hz in Pakistan.

Question 21

What is the runaway speed of a turbine?

  1. The speed at start-up
  2. The normal operating speed
  3. The speed at full load
  4. The maximum speed reached when the load is suddenly removed and the governor fails
Show answer & solution

Answer: (D) The maximum speed reached when the load is suddenly removed and the governor fails

Turbines and generators must be designed to withstand it.

Question 22

What is the shut-off head of a centrifugal pump?

  1. The head developed when the delivery valve is closed (zero discharge)
  2. The head lost in friction
  3. The head at maximum discharge
  4. The maximum suction lift
Show answer & solution

Answer: (A) The head developed when the delivery valve is closed (zero discharge)

It is shown on the pump's characteristic curve.

Question 23

What is the purpose of a foot valve with strainer at the bottom of a pump's suction pipe?

  1. To cool the pump
  2. To measure flow
  3. To keep the suction pipe full of water and prevent debris entering
  4. To increase pressure
Show answer & solution

Answer: (C) To keep the suction pipe full of water and prevent debris entering

It is a non-return valve that holds the priming water.

Question 24

What is a multistage centrifugal pump?

  1. A reciprocating pump
  2. A pump for gases only
  3. A pump with two or more impellers in series on the same shaft to develop high head
  4. A pump with one impeller
Show answer & solution

Answer: (C) A pump with two or more impellers in series on the same shaft to develop high head

It is used for boiler feed and deep wells.

Question 25

What are the main types of casing used in centrifugal pumps?

  1. Open and closed casings only
  2. Volute casing, vortex casing and casing with guide vanes (diffuser)
  3. Spiral and draft casings
  4. Single and double casings only
Show answer & solution

Answer: (B) Volute casing, vortex casing and casing with guide vanes (diffuser)

They convert kinetic energy into pressure energy.

Question 26

How does the discharge of a centrifugal pump vary with speed, according to the affinity laws?

  1. Q ∝ N²
  2. Q ∝ N³
  3. Q ∝ √N
  4. Q ∝ N
Show answer & solution

Answer: (D) Q ∝ N

Head varies as N² and power as N³.

Question 27

What type of pump is commonly used in tube wells for irrigation in Pakistan?

  1. Centrifugal (turbine or submersible) pump
  2. Gear pump
  3. Hydraulic ram
  4. Reciprocating hand pump only
Show answer & solution

Answer: (A) Centrifugal (turbine or submersible) pump

Deep tube wells use multistage vertical turbine or submersible pumps.

Practice these 27 questions interactively →