What are hydraulic machines?
Show answer & solution
Answer: (C) Machines that convert hydraulic energy into mechanical energy or mechanical energy into hydraulic energy
Turbines and pumps are the main hydraulic machines.
Mechanical Engineering · Hydraulics & Fluid Mechanics
28 questions, each with the answer and a worked solution.
Practice interactively and track your score →What are hydraulic machines?
Answer: (C) Machines that convert hydraulic energy into mechanical energy or mechanical energy into hydraulic energy
Turbines and pumps are the main hydraulic machines.
What is a hydraulic turbine?
Answer: (D) A machine that converts the hydraulic energy of water into mechanical energy
The mechanical energy usually drives an electric generator.
What is the difference between impulse and reaction turbines?
Answer: (B) In impulse turbines, all available head is converted into kinetic energy before the runner; in reaction turbines, pressure changes across the runner
A Pelton wheel is an impulse turbine.
What type of turbine is a Pelton wheel?
Answer: (C) Tangential-flow impulse turbine
It has buckets around its rim struck by water jets.
For which conditions is a Pelton wheel most suitable?
Answer: (A) High head and low discharge
It is used at heads of several hundred metres.
What type of turbine is a Francis turbine?
Answer: (B) Mixed (radial inward) flow reaction turbine
It is used for medium heads.
What type of turbine is installed at the Tarbela and Mangla dams in Pakistan?
Answer: (C) Francis turbines
Francis turbines suit the medium heads of these large dams.
What type of turbine is a Kaplan turbine?
Answer: (A) Axial-flow reaction turbine with adjustable runner blades
It is suitable for low heads and large discharges.
For which conditions is a Kaplan turbine most suitable?
Answer: (D) Low head and high discharge
It is commonly used in run-of-river and barrage power stations.
What is the difference between a Kaplan turbine and a propeller turbine?
Answer: (A) Kaplan runner blades are adjustable, while propeller turbine blades are fixed
Adjustable blades keep efficiency high at part loads.
What is the specific speed of a turbine?
Answer: (C) The speed of a geometrically similar turbine that produces unit power under unit head
Ns = N√P/H^(5/4).
Which turbine has the highest specific speed?
Answer: (B) Kaplan turbine
Pelton wheels have the lowest specific speed.
Which turbine has the lowest specific speed?
Answer: (D) Pelton wheel
Low specific speed matches high head and low discharge.
For maximum hydraulic efficiency of a Pelton wheel, what should the bucket speed be?
Answer: (B) Half of the jet velocity
In practice it is about 0.46 of jet velocity.
Through what angle are Pelton wheel buckets usually designed to deflect the jet?
Answer: (C) About 165°
A full 180° would make the water strike the next bucket.
How is the flow to a Pelton wheel controlled to keep its speed constant?
Answer: (D) By a spear (needle) valve in the nozzle operated by a governor
A deflector may also divert the jet during sudden load reductions.
What is a draft tube?
Answer: (A) A gradually expanding tube connecting the exit of a reaction turbine to the tailrace
It recovers kinetic energy and allows the turbine to be set above tailwater.
What is a penstock?
Answer: (B) A large pipe that carries water from the reservoir or forebay to the turbine
It must withstand high pressure and water hammer.
What is the function of guide vanes in a Francis turbine?
Answer: (A) To direct water onto the runner at the correct angle and regulate flow
They are adjusted by the governor.
What is the scroll (spiral) casing of a reaction turbine for?
Answer: (D) Distributing water uniformly around the runner
Its cross-section decreases gradually around the runner.
What is unit speed of a turbine?
Answer: (C) The speed of a turbine working under a head of 1 m
Nu = N/√H.
How does the power developed by a turbine vary with head for geometrically similar conditions (unit power)?
Answer: (A) P ∝ H^(3/2)
Unit power Pu = P/H^(3/2).
What is a centrifugal pump?
Answer: (C) A rotodynamic pump in which an impeller increases the pressure of liquid by centrifugal action
It converts mechanical energy into hydraulic energy.
Why must a centrifugal pump be primed before starting?
Answer: (B) Air in the casing cannot produce enough suction to lift water
Priming fills the suction pipe and casing with liquid.
What type of impeller vanes are most commonly used in centrifugal pumps?
Answer: (D) Backward-curved vanes
Backward-curved vanes give stable characteristics and high efficiency.
What is the manometric head of a centrifugal pump?
Answer: (D) The head against which the pump has to work
It is measured by gauges at the pump inlet and outlet.
What is the specific speed of a centrifugal pump?
Answer: (B) The speed of a geometrically similar pump delivering unit discharge against unit head
Ns = N√Q/H^(3/4).
What is the effect of connecting identical centrifugal pumps in series?
Answer: (A) The total head increases for the same discharge
Multistage pumps are pumps in series.