What is a fluid?
Show answer & solution
Answer: (D) A substance that deforms continuously under any shear stress, however small
Liquids and gases are both fluids.
Mechanical Engineering · Hydraulics & Fluid Mechanics
42 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a fluid?
Answer: (D) A substance that deforms continuously under any shear stress, however small
Liquids and gases are both fluids.
What type of stress can a fluid at rest not sustain?
Answer: (B) Shear stress
Only normal stresses (pressure) can exist in a static fluid.
What is an ideal fluid?
Answer: (C) A fluid that is incompressible and has no viscosity
It is a theoretical concept used to simplify analysis.
Which properties do real (practical) fluids possess?
Answer: (A) Viscosity, surface tension and compressibility
Real fluids offer resistance to flow.
At what temperature does water have its maximum density?
Answer: (B) 4 °C
At 4 °C, water's density is 1000 kg/m³.
What is the specific weight of water in SI units?
Answer: (B) 9.81 kN/m³
Specific weight = density × g = 1000 × 9.81.
What is specific gravity of a liquid?
Answer: (C) The ratio of the density of the liquid to the density of water at 4 °C
A liquid with a density of 850 kg/m³ has a specific gravity of 0.85.
What is the specific gravity of mercury?
Answer: (D) 13.6
Its high density makes it suitable for barometers and manometers.
Why is the specific weight of sea water greater than that of pure water?
Answer: (A) It contains dissolved salts and other matter
Sea water has a density of about 1025 kg/m³.
What is specific volume?
Answer: (A) Volume per unit mass of a fluid
It is the reciprocal of density.
What is viscosity?
Answer: (C) The property of a fluid by which it resists the relative motion (shear) between its layers
It is the internal friction of a fluid.
What does Newton's law of viscosity state?
Answer: (D) Shear stress is directly proportional to the rate of shear strain (velocity gradient)
τ = μ (du/dy).
What is a Newtonian fluid?
Answer: (A) A fluid that obeys Newton's law of viscosity, with constant viscosity at a given temperature
Water, air and most oils are Newtonian.
Which of these is a non-Newtonian fluid?
Answer: (C) Blood
Paints, toothpaste and polymer solutions are also non-Newtonian.
What is the SI unit of dynamic (absolute) viscosity?
Answer: (B) N·s/m² (Pa·s)
One poise = 0.1 N·s/m².
What is the poise a unit of?
Answer: (D) Dynamic viscosity
It is named after Jean Poiseuille.
What is kinematic viscosity?
Answer: (D) Dynamic viscosity divided by mass density
ν = μ/ρ.
What is the SI unit of kinematic viscosity?
Answer: (C) m²/s
One stoke = 1 cm²/s = 10⁻⁴ m²/s.
What is the stoke a unit of?
Answer: (A) Kinematic viscosity
The centistoke is commonly used for oils.
How does the viscosity of liquids change with increasing temperature?
Answer: (B) It decreases
Weaker cohesive forces at higher temperature reduce viscosity.
How does the viscosity of gases change with increasing temperature?
Answer: (A) It increases
In gases, viscosity is due to molecular momentum exchange, which rises with temperature.
How strongly does pressure affect the viscosity of liquids at ordinary pressures?
Answer: (D) Only very slightly
At extremely high pressures, the effect becomes noticeable.
Which instrument is not used for measuring viscosity?
Answer: (C) Orsat apparatus
The Orsat apparatus is used for flue gas analysis.
What is cohesion?
Answer: (B) The attraction between molecules of the same fluid
Cohesion allows a liquid to resist small tensile stresses.
What is adhesion?
Answer: (A) The attraction between molecules of different substances, such as a liquid and a solid
Water wets glass because adhesion is greater than cohesion.
What is surface tension?
Answer: (C) The force per unit length acting along the surface of a liquid, causing it to behave like a stretched membrane
It is caused by unbalanced cohesive forces at the surface.
What is the SI unit of surface tension?
Answer: (B) N/m
It can also be expressed as energy per unit area (J/m²).
What is the approximate surface tension of water in contact with air at 20 °C?
Answer: (B) 0.073 N/m
Surface tension decreases as temperature rises.
Why do falling raindrops become spherical?
Answer: (D) Surface tension tends to reduce the surface to the minimum area
A sphere has the smallest surface area for a given volume.
What is the pressure difference between the inside and outside of a liquid drop of radius r?
Answer: (C) 2σ/r
For a soap bubble with two surfaces, it is 4σ/r.
What is capillarity?
Answer: (D) The rise or fall of a liquid in a narrow tube due to surface tension
It depends on cohesion, adhesion and surface tension.
How does capillary rise change as the diameter of the tube increases?
Answer: (A) It decreases
h = 4σ cos θ/(ρgd), so h is inversely proportional to diameter.
What happens to mercury in a clean glass capillary tube?
Answer: (A) It is depressed below the outside level
Mercury does not wet glass because cohesion exceeds adhesion.
What is the approximate capillary rise of water in a clean glass tube of 1 mm bore at 20 °C?
Answer: (D) 30 mm
h = 4σ/(ρgd) ≈ 4 × 0.073/(9810 × 0.001) ≈ 0.03 m.
On what does the angle of contact between a liquid and a solid depend?
Answer: (B) The nature of both the liquid and the solid surface
Water on clean glass has a contact angle close to zero.
What is bulk modulus of elasticity?
Answer: (C) The ratio of increase in pressure to the resulting volumetric strain
K = −Δp/(ΔV/V).
What is the approximate bulk modulus of water at ordinary temperature and pressure?
Answer: (A) 2.1 GPa (about 21,000 kg/cm²)
Water is often treated as incompressible because K is large.
How does the bulk modulus of a liquid change as pressure increases?
Answer: (C) It increases
A liquid becomes harder to compress at higher pressure.
What is compressibility?
Answer: (D) The reciprocal of bulk modulus
A more compressible fluid has a smaller bulk modulus.
A liquid's volume falls from 0.040 m³ at 50 kg/cm² to 0.039 m³ at 150 kg/cm². What is its bulk modulus?
Answer: (C) 4000 kg/cm²
K = 100 ÷ (0.001/0.040) = 4000 kg/cm².
What is vapour pressure?
Answer: (B) The pressure exerted by the vapour of a liquid in equilibrium with the liquid at a given temperature
A liquid boils when its vapour pressure equals the surrounding pressure.
What is osmosis?
Answer: (D) The movement of a solvent through a semi-permeable membrane from a weaker to a stronger solution
Reverse osmosis is used for water desalination.