Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Electronics: Semiconductor Basics

Electrical Engineering · Electronics

30 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is an intrinsic semiconductor?

  1. An insulator
  2. A metal
  3. A heavily doped semiconductor
  4. A pure semiconductor with no intentional impurities
Show answer & solution

Answer: (D) A pure semiconductor with no intentional impurities

Pure silicon and germanium are intrinsic semiconductors.

Question 2

Which type of impurity is added to silicon to make an n-type semiconductor?

  1. A noble gas
  2. A pentavalent impurity such as phosphorus or arsenic
  3. A divalent impurity
  4. A trivalent impurity such as boron
Show answer & solution

Answer: (B) A pentavalent impurity such as phosphorus or arsenic

Pentavalent atoms donate free electrons.

Question 3

Which type of impurity is added to silicon to make a p-type semiconductor?

  1. A pentavalent impurity such as phosphorus
  2. A metal such as copper
  3. A trivalent impurity such as boron or gallium
  4. Oxygen
Show answer & solution

Answer: (C) A trivalent impurity such as boron or gallium

Trivalent atoms create holes and are called acceptors.

Question 4

What are the majority carriers in an n-type semiconductor?

  1. Electrons
  2. Ions
  3. Holes
  4. Protons
Show answer & solution

Answer: (A) Electrons

Holes are minority carriers in n-type material.

Question 5

What are the majority carriers in a p-type semiconductor?

  1. Electrons
  2. Ions
  3. Holes
  4. Neutrons
Show answer & solution

Answer: (C) Holes

Electrons are minority carriers in p-type material.

Question 6

What is the approximate band gap energy of silicon at room temperature?

  1. 0.67 eV
  2. 1.1 eV
  3. 3.4 eV
  4. 5.5 eV
Show answer & solution

Answer: (B) 1.1 eV

Germanium has a band gap of about 0.67 eV.

Question 7

Why is silicon preferred over germanium for most semiconductor devices?

  1. It conducts like a metal
  2. It has a smaller band gap
  3. It is rarer
  4. It has lower leakage current and works at higher temperatures
Show answer & solution

Answer: (D) It has lower leakage current and works at higher temperatures

Silicon also forms a stable oxide used in IC fabrication.

Question 8

How does the conductivity of a semiconductor change as temperature rises?

  1. It increases
  2. It becomes zero
  3. It stays constant
  4. It decreases
Show answer & solution

Answer: (A) It increases

More electron–hole pairs are generated at higher temperature.

Question 9

What is a hole in a semiconductor?

  1. A physical hole in the crystal
  2. A vacancy left when an electron leaves a covalent bond, behaving as a positive charge carrier
  3. A neutron
  4. A free proton
Show answer & solution

Answer: (B) A vacancy left when an electron leaves a covalent bond, behaving as a positive charge carrier

Holes move as neighbouring electrons fill vacancies.

Question 10

What is drift current in a semiconductor?

  1. Current due to a concentration gradient
  2. Current due to magnetic fields only
  3. Current due to movement of carriers under an applied electric field
  4. Current due to light only
Show answer & solution

Answer: (C) Current due to movement of carriers under an applied electric field

Diffusion current is caused by concentration differences.

Question 11

What is diffusion current?

  1. Current caused by carriers moving from a region of high concentration to low concentration
  2. Current in metals only
  3. Current caused by an electric field
  4. Current caused by heat only
Show answer & solution

Answer: (A) Current caused by carriers moving from a region of high concentration to low concentration

Diffusion is important in PN junctions.

Question 12

Why is electron mobility higher than hole mobility in silicon?

  1. Electrons are positive
  2. Holes are lighter
  3. They are equal
  4. Electrons move more freely in the conduction band than holes in the valence band
Show answer & solution

Answer: (D) Electrons move more freely in the conduction band than holes in the valence band

This makes n-channel devices faster than p-channel devices.

Question 13

What is the depletion region in a PN junction?

  1. A region near the junction depleted of free carriers, containing fixed ions
  2. The bulk n-region only
  3. A metal contact
  4. A heavily doped region
Show answer & solution

Answer: (A) A region near the junction depleted of free carriers, containing fixed ions

It acts as an insulating layer with a built-in electric field.

Question 14

What is the approximate barrier potential of a silicon PN junction at room temperature?

  1. 0.3 V
  2. 0.7 V
  3. 1.5 V
  4. 5 V
Show answer & solution

Answer: (B) 0.7 V

For germanium it is about 0.3 V.

Question 15

What does the mass action law state for a semiconductor in equilibrium?

  1. The sum of carriers is constant
  2. Current is proportional to voltage
  3. Electrons equal holes in doped material
  4. The product of electron and hole concentrations equals the square of intrinsic carrier concentration
Show answer & solution

Answer: (D) The product of electron and hole concentrations equals the square of intrinsic carrier concentration

n × p = ni².

Question 16

Which effect is used to determine whether a semiconductor is n-type or p-type and its carrier concentration?

  1. Photoelectric effect
  2. Zeeman effect
  3. Hall effect
  4. Seebeck effect
Show answer & solution

Answer: (C) Hall effect

The polarity of the Hall voltage shows the carrier type.

Question 17

What type of bond holds atoms together in a silicon crystal?

  1. Ionic bonds
  2. Metallic bonds
  3. Hydrogen bonds
  4. Covalent bonds
Show answer & solution

Answer: (D) Covalent bonds

Each silicon atom shares four electrons with neighbours.

Question 18

What is a donor energy level?

  1. An energy level just below the conduction band introduced by pentavalent impurities
  2. A level just above the valence band
  3. A level in the middle of the band gap only
  4. A level above the conduction band
Show answer & solution

Answer: (A) An energy level just below the conduction band introduced by pentavalent impurities

Electrons from donor levels easily enter the conduction band.

Question 19

Which semiconductor material is commonly used for LEDs and high-speed devices because of its direct band gap?

  1. Germanium
  2. Gallium arsenide
  3. Silicon
  4. Carbon
Show answer & solution

Answer: (B) Gallium arsenide

Direct band gap materials emit light efficiently.

Question 20

How does the width of the depletion region change under reverse bias?

  1. It decreases
  2. It disappears
  3. It increases
  4. It stays constant
Show answer & solution

Answer: (C) It increases

Forward bias narrows the depletion region.

Question 21

What is the Fermi level in an n-type semiconductor closer to?

  1. Outside the bands
  2. The valence band
  3. The middle of the band gap exactly
  4. The conduction band
Show answer & solution

Answer: (D) The conduction band

In p-type material it moves closer to the valence band.

Question 22

What is the approximate thermal voltage VT at room temperature (300 K)?

  1. About 0.7 V
  2. About 2.6 V
  3. About 26 mV
  4. About 260 mV
Show answer & solution

Answer: (C) About 26 mV

VT = kT/q.

Question 23

What is a compound semiconductor?

  1. An insulator
  2. A semiconductor formed from two or more elements such as GaAs or GaN
  3. A pure silicon crystal
  4. A metal alloy
Show answer & solution

Answer: (B) A semiconductor formed from two or more elements such as GaAs or GaN

Wide band gap GaN is used in power and LED devices.

Question 24

What type of material has a very large band gap and practically no free electrons at room temperature?

  1. Insulator
  2. Semiconductor
  3. Superconductor
  4. Conductor
Show answer & solution

Answer: (A) Insulator

Diamond and glass are insulators.

Question 25

What happens to the resistance of an intrinsic semiconductor when temperature decreases?

  1. It increases
  2. It decreases
  3. It becomes zero
  4. It stays constant
Show answer & solution

Answer: (A) It increases

Semiconductors have a negative temperature coefficient of resistance.

Question 26

What is meant by doping a semiconductor?

  1. Coating it with metal
  2. Heating it
  3. Adding small controlled amounts of impurities to change its electrical properties
  4. Cooling it
Show answer & solution

Answer: (C) Adding small controlled amounts of impurities to change its electrical properties

Doping levels may be a few parts per million or less.

Question 27

What is the effect of increasing doping concentration on the depletion region width of a PN junction?

  1. It increases the width
  2. It makes the junction disappear
  3. It has no effect
  4. It decreases the width
Show answer & solution

Answer: (D) It decreases the width

Heavily doped junctions have narrow depletion layers.

Question 28

What is an acceptor impurity?

  1. An impurity that creates holes by accepting electrons
  2. A pure semiconductor
  3. An impurity that donates electrons
  4. A metal contact
Show answer & solution

Answer: (A) An impurity that creates holes by accepting electrons

Boron is a typical acceptor in silicon.

Question 29

What is the charge on a semiconductor after doping?

  1. It becomes positive in n-type
  2. It remains electrically neutral overall
  3. It becomes highly charged
  4. It becomes negative in p-type
Show answer & solution

Answer: (B) It remains electrically neutral overall

Donor or acceptor ions are balanced by free carriers.

Question 30

What is recombination in a semiconductor?

  1. The flow of drift current
  2. The creation of electron–hole pairs
  3. The process in which a free electron fills a hole, removing both carriers
  4. The doping process
Show answer & solution

Answer: (C) The process in which a free electron fills a hole, removing both carriers

In direct band gap materials recombination can emit light.

Practice these 30 questions interactively →