Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Electronics: Diodes and Applications

Electrical Engineering · Electronics

30 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the effect of forward biasing a PN junction diode?

  1. It increases the barrier and blocks current
  2. It reduces the barrier and allows large current to flow
  3. It destroys the diode
  4. It produces no current
Show answer & solution

Answer: (B) It reduces the barrier and allows large current to flow

Current rises rapidly above about 0.7 V for silicon.

Question 2

What flows through a reverse-biased PN junction diode below breakdown?

  1. A large forward current
  2. No current under any condition
  3. Alternating current only
  4. A very small reverse saturation (leakage) current
Show answer & solution

Answer: (D) A very small reverse saturation (leakage) current

Leakage current is due to minority carriers.

Question 3

How does the reverse saturation current of a silicon diode change with temperature?

  1. It becomes zero
  2. It halves for every 10 °C rise
  3. It roughly doubles for every 10 °C rise
  4. It stays constant
Show answer & solution

Answer: (C) It roughly doubles for every 10 °C rise

This makes diodes temperature sensitive.

Question 4

What is the Shockley diode equation?

  1. I = V/R
  2. I = Is × V
  3. I = Is/(V − VT)
  4. I = Is(e^(V/ηVT) − 1)
Show answer & solution

Answer: (D) I = Is(e^(V/ηVT) − 1)

Is is the reverse saturation current and η the ideality factor.

Question 5

What is the dynamic (AC) resistance of a silicon diode carrying a forward current of 1 mA at room temperature?

  1. About 0.7 Ω
  2. About 2.6 Ω
  3. About 26 Ω
  4. About 260 Ω
Show answer & solution

Answer: (C) About 26 Ω

rd ≈ VT/I = 26 mV/1 mA.

Question 6

What is Zener breakdown?

  1. Breakdown in heavily doped junctions caused by a strong electric field pulling electrons from bonds, usually below about 5 V
  2. Breakdown by carrier multiplication at high voltage
  3. Thermal runaway
  4. Forward conduction
Show answer & solution

Answer: (A) Breakdown in heavily doped junctions caused by a strong electric field pulling electrons from bonds, usually below about 5 V

Avalanche breakdown dominates at higher voltages.

Question 7

What is avalanche breakdown?

  1. Forward conduction
  2. Breakdown caused by carriers gaining enough energy to free more carriers by collision
  3. Breakdown due to heavy doping at low voltage
  4. Light emission
Show answer & solution

Answer: (B) Breakdown caused by carriers gaining enough energy to free more carriers by collision

It occurs in lightly doped junctions at higher reverse voltages.

Question 8

What is the main application of a Zener diode?

  1. Light emission
  2. Voltage regulation and reference
  3. Rectification of high currents
  4. Amplification
Show answer & solution

Answer: (B) Voltage regulation and reference

It operates in reverse breakdown with nearly constant voltage.

Question 9

What current flows through the series resistor of a Zener regulator with a 12 V input, a 5 V Zener and a 100 Ω resistor?

  1. 7 mA
  2. 50 mA
  3. 70 mA
  4. 120 mA
Show answer & solution

Answer: (C) 70 mA

I = (12 − 5)/100 = 0.07 A.

Question 10

In which bias does a light-emitting diode (LED) emit light?

  1. Forward bias
  2. Zero bias
  3. Breakdown only
  4. Reverse bias
Show answer & solution

Answer: (A) Forward bias

Recombination of electrons and holes releases photons.

Question 11

In which bias is a photodiode normally operated?

  1. Zero bias only
  2. Forward bias
  3. Avalanche bias always
  4. Reverse bias
Show answer & solution

Answer: (D) Reverse bias

Light generates carriers that increase reverse current.

Question 12

What property of a varactor diode is used in tuning circuits?

  1. Its junction capacitance changes with reverse voltage
  2. It emits light
  3. It has negative resistance
  4. Its resistance changes with light
Show answer & solution

Answer: (A) Its junction capacitance changes with reverse voltage

Varactors tune radio and TV receivers.

Question 13

Which diode shows a negative resistance region due to quantum tunnelling?

  1. Photodiode
  2. Tunnel diode
  3. Zener diode
  4. LED
Show answer & solution

Answer: (B) Tunnel diode

Tunnel diodes are very heavily doped.

Question 14

What does a clipper circuit do?

  1. Adds a DC level to a signal
  2. Converts DC to AC
  3. Doubles the voltage
  4. Removes the part of a signal above or below a set level
Show answer & solution

Answer: (D) Removes the part of a signal above or below a set level

Clippers limit signal amplitudes.

Question 15

What does a clamper circuit do?

  1. Removes part of the signal
  2. Converts AC to DC exactly
  3. Shifts the DC level of a signal without changing its shape
  4. Amplifies current
Show answer & solution

Answer: (C) Shifts the DC level of a signal without changing its shape

Clampers use a capacitor and a diode.

Question 16

What is the output of an ideal voltage doubler fed with an AC peak voltage Vm?

  1. About 2Vm DC
  2. Vm DC
  3. 4Vm DC
  4. Vm/2 DC
Show answer & solution

Answer: (A) About 2Vm DC

Voltage multipliers use diodes and capacitors.

Question 17

What is a solar cell?

  1. A heating element
  2. A large-area PN junction that converts light directly into electrical energy
  3. A Zener diode
  4. A capacitor
Show answer & solution

Answer: (B) A large-area PN junction that converts light directly into electrical energy

A typical silicon cell gives about 0.5–0.6 V open-circuit.

Question 18

Which diode is used as a high-speed switch with low forward drop in SMPS?

  1. Varactor diode
  2. Tunnel diode only
  3. Zener diode
  4. Schottky diode
Show answer & solution

Answer: (D) Schottky diode

It has no minority carrier storage.

Question 19

What is the main use of a laser diode?

  1. Rectifying power
  2. Voltage regulation
  3. Producing coherent light for fibre optic communication and optical storage
  4. Tuning
Show answer & solution

Answer: (C) Producing coherent light for fibre optic communication and optical storage

Laser diodes need precise current control.

Question 20

What happens when a diode is used as a switch?

  1. It conducts in forward bias (on) and blocks in reverse bias (off)
  2. It stores charge permanently
  3. It amplifies signals
  4. It conducts in both directions
Show answer & solution

Answer: (A) It conducts in forward bias (on) and blocks in reverse bias (off)

Diodes are used in logic and protection circuits.

Question 21

What is the function of a diode connected across a relay coil?

  1. To rectify the coil supply
  2. To suppress the voltage spike when the coil is switched off
  3. To light the coil
  4. To increase voltage
Show answer & solution

Answer: (B) To suppress the voltage spike when the coil is switched off

It is a flyback or freewheeling diode.

Question 22

What is the peak inverse voltage (PIV) rating of a diode?

  1. The breakdown current
  2. The forward voltage drop
  3. The maximum forward current
  4. The maximum reverse voltage it can withstand without breakdown
Show answer & solution

Answer: (D) The maximum reverse voltage it can withstand without breakdown

Rectifier diodes must have PIV above the circuit's peak reverse voltage.

Question 23

What is the typical forward voltage of a red LED?

  1. About 0.01 V
  2. About 0.3 V
  3. About 1.8 to 2.2 V
  4. About 12 V
Show answer & solution

Answer: (C) About 1.8 to 2.2 V

Blue and white LEDs have higher forward voltages.

Question 24

What is the knee (cut-in) voltage of a silicon diode?

  1. About 0.1 V
  2. About 0.7 V
  3. About 3 V
  4. About 10 V
Show answer & solution

Answer: (B) About 0.7 V

Below this voltage, forward current is very small.

Question 25

What is the function of a diode bridge in a DC power supply?

  1. To filter ripple
  2. To amplify current
  3. To regulate voltage
  4. To convert AC into pulsating DC
Show answer & solution

Answer: (D) To convert AC into pulsating DC

A filter capacitor and regulator usually follow the bridge.

Question 26

What is a Zener diode's dynamic resistance?

  1. The small change in Zener voltage divided by the change in Zener current
  2. The series resistor value
  3. The forward resistance
  4. The leakage resistance
Show answer & solution

Answer: (A) The small change in Zener voltage divided by the change in Zener current

A low dynamic resistance gives better regulation.

Question 27

What limits the maximum current through a Zener diode in a regulator?

  1. Its reverse leakage
  2. Its colour
  3. Its forward voltage only
  4. Its power rating, which must not be exceeded
Show answer & solution

Answer: (D) Its power rating, which must not be exceeded

PZ = VZ × IZ.

Question 28

What happens to the output of a half-wave rectifier if the diode is connected in reverse?

  1. The output polarity is reversed
  2. It becomes full-wave
  3. The output doubles
  4. The output becomes zero
Show answer & solution

Answer: (A) The output polarity is reversed

The diode then passes the negative half cycles.

Question 29

Which diode is used for protection against voltage transients in electronic circuits?

  1. Transient voltage suppressor (TVS) diode
  2. Varactor diode
  3. Photodiode
  4. LED
Show answer & solution

Answer: (A) Transient voltage suppressor (TVS) diode

TVS diodes clamp fast overvoltages.

Question 30

What is the main reason for connecting a resistor in series with an LED?

  1. To reverse bias the LED
  2. To limit the current to a safe value
  3. To increase brightness without limit
  4. To change its colour
Show answer & solution

Answer: (B) To limit the current to a safe value

Current-limiting is essential for LED life.

Practice these 30 questions interactively →