How is the transfer function of a system defined?
Show answer & solution
Answer: (A) The ratio of the Laplace transform of the output to that of the input with zero initial conditions
It describes LTI systems only.
Electrical Engineering · Control Systems
26 questions, each with the answer and a worked solution.
Practice interactively and track your score →How is the transfer function of a system defined?
Answer: (A) The ratio of the Laplace transform of the output to that of the input with zero initial conditions
It describes LTI systems only.
What is the closed-loop transfer function of a negative feedback system with forward gain G and feedback H?
Answer: (B) G/(1 + GH)
For unity feedback, H = 1.
What is the closed-loop transfer function of a positive feedback system?
Answer: (C) G/(1 − GH)
Positive feedback can drive the denominator to zero.
What is the closed-loop gain of a system with G = 10 and H = 0.1 in negative feedback?
Answer: (B) 5
T = 10/(1 + 1) = 5.
What are the poles of a transfer function?
Answer: (D) The values of s that make the denominator zero
Poles determine stability and the natural response.
What are the zeros of a transfer function?
Answer: (C) The values of s that make the numerator zero
Zeros affect the shape of the response.
What is the order of a system?
Answer: (D) The highest power of s in the denominator of its transfer function
A second-order system has two poles.
What is the type of a system?
Answer: (A) The number of open-loop poles at the origin
Type determines steady-state error.
What is the equivalent transfer function of two blocks G₁ and G₂ in series (cascade)?
Answer: (A) G₁G₂
Cascaded blocks multiply.
What is the equivalent transfer function of two blocks G₁ and G₂ in parallel?
Answer: (D) G₁ + G₂
Parallel paths add.
What is the characteristic equation of a closed-loop system with open-loop transfer function GH?
Answer: (B) 1 + GH = 0
Its roots are the closed-loop poles.
Which formula gives the overall gain of a signal flow graph?
Answer: (C) Mason's gain formula
It uses forward paths, loops and graph determinants.
What is a unity feedback system?
Answer: (C) A system in which the feedback path gain H equals one
Many standard results are derived for unity feedback.
What is the transfer function of a pure integrator?
Answer: (A) 1/s
An integrator has a pole at the origin.
What is the transfer function of a pure differentiator?
Answer: (B) s
A differentiator has a zero at the origin.
What is the transfer function of a pure time delay of T seconds?
Answer: (D) e^(−sT)
Time delays cause phase lag that grows with frequency.
What is the transfer function of a first-order system with time constant τ and DC gain K?
Answer: (C) K/(1 + sτ)
Its step response is exponential.
What happens when a summing point is moved ahead of a block G in block diagram reduction?
Answer: (A) A block 1/G must be added in the moved branch
Equivalent rules keep the overall transfer function unchanged.
What is the DC gain of a transfer function G(s)?
Answer: (B) G(0), its value at s = 0
It gives the steady-state response to a unit step for stable systems.
What is the transfer function of an RC low-pass circuit with output across the capacitor?
Answer: (D) 1/(1 + sRC)
It is a first-order system with τ = RC.
What is a minimum-phase system?
Answer: (C) A system with all poles and zeros in the left half of the s-plane
Non-minimum phase systems show initial undershoot.
What is the closed-loop transfer function for G(s) = 4/(s(s + 2)) with unity negative feedback?
Answer: (C) 4/(s² + 2s + 4)
T = G/(1 + G).
What is the DC gain of G(s) = 5/(s + 2)?
Answer: (B) 2.5
G(0) = 5/2.
What is the type of G(s) = 10/(s²(s + 5))?
Answer: (D) Type 2
There are two poles at the origin.
What is the order of a system with transfer function (s + 1)/(s³ + 4s² + 2s + 5)?
Answer: (A) Third order
Order is the highest power of s in the denominator.
What does a signal flow graph consist of?
Answer: (D) Nodes representing variables and branches representing gains
Mason's gain formula is applied to it.