Which graphical method shows how the closed-loop poles move as the system gain changes?
Show answer & solution
Answer: (B) Root locus plot
It was developed by W. R. Evans.
Electrical Engineering · Control Systems
24 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which graphical method shows how the closed-loop poles move as the system gain changes?
Answer: (B) Root locus plot
It was developed by W. R. Evans.
Where do root locus branches start when K = 0?
Answer: (D) At the open-loop poles
They end at open-loop zeros or infinity as K → ∞.
How many branches does a root locus have?
Answer: (C) Equal to the number of open-loop poles (or zeros, whichever is greater)
Each branch traces one closed-loop pole.
About which axis is a root locus always symmetrical?
Answer: (D) The real axis
Complex roots occur in conjugate pairs.
Which parts of the real axis lie on the root locus?
Answer: (A) Segments to the left of an odd number of real poles and zeros
This follows from the angle condition.
What is the angle of the asymptotes of a root locus?
Answer: (B) (2q + 1) × 180°/(P − Z)
P and Z are the numbers of open-loop poles and zeros.
How is the centroid of root locus asymptotes calculated?
Answer: (C) (Sum of poles − sum of zeros)/(P − Z)
The asymptotes intersect the real axis at this point.
How are breakaway points on the real axis found?
Answer: (C) By solving dK/ds = 0
Branches leave or join the real axis at these points.
How is the point where the root locus crosses the imaginary axis found?
Answer: (A) Using the Routh array to find the critical gain and frequency
At this gain the system is marginally stable.
What is the angle condition of the root locus?
Answer: (D) The angle of GH(s) equals an odd multiple of 180°
Points satisfying it lie on the locus.
What is the magnitude condition of the root locus?
Answer: (B) The magnitude of GH(s) equals 1
It gives the value of K at a point on the locus.
How does adding an open-loop pole affect the root locus?
Answer: (C) It shifts the locus to the right, tending to reduce stability
Extra poles add phase lag.
How does adding an open-loop zero affect the root locus?
Answer: (B) It shifts the locus to the left, improving stability
Zeros add phase lead.
What happens to the root locus branches that do not end at finite zeros as K → ∞?
Answer: (D) They go to infinity along asymptotes
There are P − Z such branches.
What does a root locus show that a single Routh test does not?
Answer: (A) The paths of all closed-loop poles over the full range of gain
It helps choose a gain for desired damping.
For a unity feedback system with G(s) = K/(s(s + 2)), where do the root locus branches break away from the real axis?
Answer: (A) At s = −1
Breakaway lies midway between the two poles at 0 and −2.
What is the root locus of G(s)H(s) = K/(s + 1) for K from 0 to ∞?
Answer: (D) A line along the real axis from −1 towards −∞
The closed-loop pole is at s = −(1 + K).
For G(s) = K/(s(s + 4)), at what point do the asymptotes intersect the real axis?
Answer: (B) −2
Centroid = (0 − 4)/2 = −2.
What is the angle of the asymptotes for a system with two poles and no zeros?
Answer: (C) ±90°
(2q + 1)180°/2 = 90°, 270°.
What is the angle of the asymptotes for a system with three poles and no zeros?
Answer: (A) ±60° and 180°
(2q + 1)180°/3 = 60°, 180°, 300°.
What is the angle of departure used for in root locus construction?
Answer: (C) Finding the direction in which the locus leaves a complex pole
It is found from the angle condition.
What gain corresponds to a root locus point s₀?
Answer: (B) K = 1 divided by the magnitude of G(s₀)H(s₀) evaluated without K
The magnitude condition gives the gain.
What happens to the damping of a second-order system as K increases along a root locus of K/(s(s + a))?
Answer: (A) Damping ratio decreases after the poles become complex
The poles move vertically away from the real axis.
Which engineer developed the root locus method?
Answer: (D) W. R. Evans
Evans published the method in 1948.