What is the frequency response of a system?
Show answer & solution
Answer: (D) Its steady-state output in amplitude and phase for sinusoidal inputs of varying frequency
It is obtained by setting s = jω.
Electrical Engineering · Control Systems
24 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the frequency response of a system?
Answer: (D) Its steady-state output in amplitude and phase for sinusoidal inputs of varying frequency
It is obtained by setting s = jω.
What does a Bode plot show?
Answer: (B) Magnitude in decibels and phase angle against the logarithm of frequency
It is drawn using straight-line asymptotes.
What is the slope of the magnitude plot of a simple pole above its corner frequency?
Answer: (C) −20 dB per decade
It is also about −6 dB per octave.
What is the slope contributed by a simple zero above its corner frequency?
Answer: (D) +20 dB per decade
Zeros add phase lead up to +90°.
What is the magnitude slope and phase of a pure integrator 1/s?
Answer: (C) −20 dB per decade and −90° at all frequencies
It crosses 0 dB at ω = 1 rad/s.
What is the corner (break) frequency of the factor 1/(1 + sT)?
Answer: (B) 1/T
The actual magnitude there is 3 dB below the asymptote.
What is the gain crossover frequency?
Answer: (A) The frequency at which the open-loop magnitude is 0 dB
Phase margin is measured here.
What is the phase crossover frequency?
Answer: (D) The frequency at which the open-loop phase is −180°
Gain margin is measured here.
What is the resonant peak Mr of a closed-loop frequency response related to?
Answer: (C) The damping ratio, with smaller damping giving a higher peak
A high resonant peak means large overshoot.
What is the bandwidth of a closed-loop system?
Answer: (A) The frequency range over which the magnitude stays within 3 dB of its low-frequency value
Larger bandwidth means faster response.
What is a polar (Nyquist) plot?
Answer: (B) A plot of G(jω) in the complex plane as frequency varies
It is used with the Nyquist stability criterion.
What is a Nichols chart used for?
Answer: (A) Relating open-loop magnitude and phase to closed-loop frequency response
It is useful for designing compensators.
What is one decade in frequency?
Answer: (C) A tenfold change in frequency
An octave is a doubling.
What slope corresponds to 20 dB per decade in dB per octave?
Answer: (B) About 6 dB per octave
20 log₁₀(2) ≈ 6 dB.
What is the high-frequency phase of a system with three poles and no zeros?
Answer: (A) −270°
Each pole contributes −90° at high frequency.
What is the magnitude in dB of a constant gain K = 10 on a Bode plot?
Answer: (C) 20 dB
20 log₁₀(10) = 20 dB.
What is the phase angle contributed by a simple pole at its corner frequency?
Answer: (C) −45°
The phase changes from 0° to −90° around the corner.
What is the actual magnitude of a simple pole factor at its corner frequency compared with the asymptote?
Answer: (A) 3 dB lower
The asymptotic error is largest at the corner.
What is the slope of a double pole above its corner frequency?
Answer: (B) −40 dB per decade
Each pole adds −20 dB per decade.
What is the relationship between bandwidth and speed of response?
Answer: (D) A larger bandwidth gives a faster response
Rise time is roughly inversely proportional to bandwidth.
Who introduced the logarithmic frequency plots widely used in control design?
Answer: (D) H. W. Bode
Bode plots are easy to sketch with asymptotes.
What is the main advantage of using Bode plots for system design?
Answer: (B) Effects of cascaded elements add directly on a logarithmic scale
Gain and phase margins are read easily.
What does a resonant peak in the closed-loop frequency response indicate in the time domain?
Answer: (C) Overshoot and oscillation in the step response
A high peak means low damping.
What does an M-circle on a Nyquist plot represent?
Answer: (A) A locus of constant closed-loop magnitude
M and N circles relate open-loop and closed-loop responses.