Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Control Systems: Control Fundamentals

Electrical Engineering · Control Systems

24 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the main difference between open-loop and closed-loop control systems?

  1. They are identical
  2. A closed-loop system has no controller
  3. An open-loop system uses feedback
  4. A closed-loop system uses feedback of the output to correct errors; an open-loop system does not
Show answer & solution

Answer: (D) A closed-loop system uses feedback of the output to correct errors; an open-loop system does not

Feedback makes closed-loop systems more accurate.

Question 2

Which of these is an example of an open-loop control system?

  1. An autopilot
  2. A traffic light operating on fixed timers
  3. A voltage regulator with feedback
  4. An air conditioner with a thermostat
Show answer & solution

Answer: (B) A traffic light operating on fixed timers

The fixed-timer light does not measure traffic conditions.

Question 3

Which of these is an example of a closed-loop control system?

  1. A manually operated fan regulator
  2. A washing machine running on a fixed timer
  3. An electric iron with a thermostat
  4. A toaster with a fixed timer
Show answer & solution

Answer: (C) An electric iron with a thermostat

The thermostat senses temperature and switches the heater.

Question 4

What is the error signal in a feedback control system?

  1. The difference between the reference input and the feedback signal
  2. The sensor noise only
  3. The output signal
  4. The disturbance
Show answer & solution

Answer: (A) The difference between the reference input and the feedback signal

The controller acts on the error.

Question 5

How does negative feedback affect the overall gain of a system?

  1. It increases the gain
  2. It makes the gain infinite
  3. It reduces the gain
  4. It has no effect
Show answer & solution

Answer: (C) It reduces the gain

Reduced gain is traded for better accuracy and stability.

Question 6

How does negative feedback affect the sensitivity of a system to parameter variations?

  1. It has no effect
  2. It reduces sensitivity
  3. It increases sensitivity
  4. It makes the system unstable
Show answer & solution

Answer: (B) It reduces sensitivity

Sensitivity of the closed-loop system is reduced by 1/(1 + GH).

Question 7

What is the effect of negative feedback on the bandwidth of a system?

  1. It increases the bandwidth
  2. It makes bandwidth zero
  3. It has no effect
  4. It reduces the bandwidth
Show answer & solution

Answer: (A) It increases the bandwidth

Faster response accompanies wider bandwidth.

Question 8

What is a servomechanism?

  1. An open-loop timer
  2. A power amplifier
  3. A temperature regulator only
  4. A feedback control system in which the output is a mechanical position or its derivatives
Show answer & solution

Answer: (D) A feedback control system in which the output is a mechanical position or its derivatives

Servos are used in robots, antennas and machine tools.

Question 9

What is a regulator in control systems?

  1. A system with varying reference only
  2. A feedback system that keeps the output constant despite disturbances
  3. A sensor
  4. An open-loop system
Show answer & solution

Answer: (B) A feedback system that keeps the output constant despite disturbances

Voltage and speed regulators are examples.

Question 10

What is a disturbance in a control system?

  1. An unwanted input that affects the output
  2. The controller output
  3. The reference input
  4. The feedback signal
Show answer & solution

Answer: (A) An unwanted input that affects the output

Feedback reduces the effect of disturbances.

Question 11

What is the sensitivity of a closed-loop system with forward gain G and feedback H to changes in G?

  1. 1 + GH
  2. GH
  3. 1/(1 + GH)
  4. G/H
Show answer & solution

Answer: (C) 1/(1 + GH)

High loop gain makes the system insensitive to G.

Question 12

What is a linear time-invariant (LTI) system?

  1. A digital system only
  2. A system with varying parameters
  3. A non-linear system
  4. A system obeying superposition whose parameters do not change with time
Show answer & solution

Answer: (D) A system obeying superposition whose parameters do not change with time

Transfer function methods apply to LTI systems.

Question 13

What is the main disadvantage of feedback control?

  1. It always reduces accuracy
  2. It can cause instability if not designed properly
  3. It removes all errors without design
  4. It increases sensitivity
Show answer & solution

Answer: (B) It can cause instability if not designed properly

Oscillation can result from excessive gain or delay.

Question 14

Which component measures the output and provides feedback in a control system?

  1. Actuator
  2. Reference input
  3. Plant
  4. Sensor (transducer)
Show answer & solution

Answer: (D) Sensor (transducer)

Examples include thermocouples, tachogenerators and encoders.

Question 15

What is the plant in control system terminology?

  1. The controller
  2. The sensor
  3. The system or process being controlled
  4. The reference signal
Show answer & solution

Answer: (C) The system or process being controlled

For example, a motor, furnace or aircraft.

Question 16

What is an actuator in a control system?

  1. A device that applies the controller output to the plant
  2. A measuring device
  3. The reference input
  4. A display
Show answer & solution

Answer: (A) A device that applies the controller output to the plant

Valves, motors and relays are actuators.

Question 17

What does MIMO mean in control systems?

  1. Mechanical input mechanical output
  2. Minimum input maximum output
  3. Mixed input mixed output
  4. Multiple-input multiple-output
Show answer & solution

Answer: (D) Multiple-input multiple-output

Aircraft and power grids are MIMO systems.

Question 18

What is the effect of positive feedback on a system?

  1. It increases gain and tends to make the system unstable
  2. It reduces gain
  3. It improves stability
  4. It reduces sensitivity
Show answer & solution

Answer: (A) It increases gain and tends to make the system unstable

Positive feedback is used in oscillators and latches.

Question 19

Which type of control is used by a home water tank float switch that turns a pump on and off?

  1. PID control
  2. Proportional control
  3. On–off (two-position) control
  4. Derivative control
Show answer & solution

Answer: (C) On–off (two-position) control

On–off control is simple but causes cycling.

Question 20

What does the reference input of a control system represent?

  1. The sensor noise
  2. The desired value of the output
  3. The disturbance
  4. The actual output
Show answer & solution

Answer: (B) The desired value of the output

It is also called the set point.

Question 21

Which biological system is an example of closed-loop control?

  1. Human body temperature regulation
  2. A ball thrown in the air
  3. A clock pendulum without drive
  4. A falling stone
Show answer & solution

Answer: (A) Human body temperature regulation

The body senses temperature and adjusts sweating and shivering.

Question 22

What is the main purpose of a control system?

  1. To waste energy
  2. To increase noise
  3. To make a system output follow a desired reference despite disturbances
  4. To remove all sensors
Show answer & solution

Answer: (C) To make a system output follow a desired reference despite disturbances

Control is used in power plants, vehicles and industry.

Question 23

Which type of controller is used for automatic voltage regulation of generators?

  1. Fuse
  2. Manual switch
  3. Open-loop timer
  4. Closed-loop feedback controller acting on excitation
Show answer & solution

Answer: (D) Closed-loop feedback controller acting on excitation

The AVR compares terminal voltage with a reference.

Question 24

What is a sampled-data (digital) control system?

  1. A system in which signals are sampled and processed by a digital controller
  2. A system with no sampling
  3. An open-loop timer
  4. An analog-only system
Show answer & solution

Answer: (A) A system in which signals are sampled and processed by a digital controller

Microcontrollers and PLCs implement digital control.

Practice these 24 questions interactively →