Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Control Systems: Time Response

Electrical Engineering · Control Systems

27 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the time constant of a first-order system?

  1. The time for the step response to reach 63.2% of its final value
  2. The settling time
  3. The time to reach 50%
  4. The time to reach 100%
Show answer & solution

Answer: (A) The time for the step response to reach 63.2% of its final value

For G = 1/(1 + sτ), the time constant is τ.

Question 2

What is the standard form of a second-order system transfer function?

  1. 1/(s² + ωn²) only
  2. ωn²/(s² + 2ζωns + ωn²)
  3. ζ/(s² + ωn)
  4. ωn/(s + ζ)
Show answer & solution

Answer: (B) ωn²/(s² + 2ζωns + ωn²)

ωn is natural frequency and ζ damping ratio.

Question 3

How does a second-order system respond to a step when its damping ratio is between 0 and 1?

  1. With sustained oscillations
  2. Overdamped with no overshoot
  3. Critically damped
  4. Underdamped, with decaying oscillations
Show answer & solution

Answer: (D) Underdamped, with decaying oscillations

Most practical control systems are designed to be underdamped.

Question 4

What is the step response of a second-order system with damping ratio ζ = 1?

  1. Underdamped
  2. Critically damped, the fastest response without overshoot
  3. Undamped oscillation
  4. Overdamped
Show answer & solution

Answer: (B) Critically damped, the fastest response without overshoot

The poles are real and equal.

Question 5

What is the step response of a second-order system with damping ratio ζ = 0?

  1. Undamped sustained oscillation
  2. Exponential rise
  3. Overdamped
  4. Critically damped
Show answer & solution

Answer: (A) Undamped sustained oscillation

Poles lie on the imaginary axis.

Question 6

What is the formula for the peak overshoot of a second-order underdamped system?

  1. Mp = π/ωd
  2. Mp = 1/ζ
  3. Mp = e^(−πζ/√(1 − ζ²))
  4. Mp = ζωn
Show answer & solution

Answer: (C) Mp = e^(−πζ/√(1 − ζ²))

Overshoot depends only on damping ratio.

Question 7

What is the approximate percentage overshoot of a second-order system with ζ = 0.5?

  1. About 5%
  2. About 16%
  3. About 30%
  4. About 50%
Show answer & solution

Answer: (B) About 16%

Mp = e^(−π × 0.5/0.866) ≈ 0.163.

Question 8

What is the approximate 2% settling time of a second-order underdamped system?

  1. ζωn
  2. 1/ωn
  3. π/ωd
  4. 4/(ζωn)
Show answer & solution

Answer: (D) 4/(ζωn)

For a 5% criterion it is about 3/(ζωn).

Question 9

What is the damped natural frequency of a system with ωn = 10 rad/s and ζ = 0.6?

  1. 6 rad/s
  2. 8 rad/s
  3. 10 rad/s
  4. 16 rad/s
Show answer & solution

Answer: (B) 8 rad/s

ωd = ωn√(1 − ζ²) = 10 × 0.8.

Question 10

What is the peak time of an underdamped second-order system?

  1. 1/ζ
  2. 4/(ζωn)
  3. π/ωd
  4. 2π/ωn
Show answer & solution

Answer: (C) π/ωd

It is the time to reach the first peak.

Question 11

What is the steady-state error of a type-0 unity feedback system to a unit step input with position error constant Kp?

  1. Infinite
  2. Zero
  3. 1/Kp
  4. 1/(1 + Kp)
Show answer & solution

Answer: (D) 1/(1 + Kp)

Kp = lim s→0 of G(s).

Question 12

What is the steady-state error of a type-0 system with Kp = 9 to a unit step input?

  1. 0
  2. 0.1
  3. 0.9
  4. 1/9
Show answer & solution

Answer: (B) 0.1

ess = 1/(1 + 9).

Question 13

What is the steady-state error of a type-1 system to a unit step input?

  1. Zero
  2. 1/(1 + Kp) with Kp finite
  3. Infinite
  4. 1/Kv
Show answer & solution

Answer: (A) Zero

The integrator eliminates step error.

Question 14

What is the steady-state error of a type-1 system to a unit ramp input?

  1. 1/Kv
  2. Infinite
  3. 1/(1 + Kp)
  4. Zero
Show answer & solution

Answer: (A) 1/Kv

Kv = lim s→0 of sG(s).

Question 15

What is the steady-state error of a type-0 system to a unit ramp input?

  1. 1/Ka
  2. 1/Kv
  3. Zero
  4. Infinite
Show answer & solution

Answer: (D) Infinite

Higher-type systems are needed to follow ramps.

Question 16

Which standard test signal is the derivative of a unit step?

  1. Sinusoid
  2. Unit ramp
  3. Unit impulse
  4. Unit parabola
Show answer & solution

Answer: (C) Unit impulse

The impulse response is the derivative of the step response.

Question 17

What are dominant poles?

  1. Poles far into the left half-plane
  2. Zeros near the origin
  3. Poles in the right half-plane
  4. Closed-loop poles closest to the imaginary axis that mainly determine the transient response
Show answer & solution

Answer: (D) Closed-loop poles closest to the imaginary axis that mainly determine the transient response

Far-away poles decay quickly.

Question 18

What is the rise time of a step response?

  1. The time to the first peak
  2. The settling time
  3. The time for the output to rise from 10% to 90% (or 0 to 100%) of its final value
  4. The time constant only
Show answer & solution

Answer: (C) The time for the output to rise from 10% to 90% (or 0 to 100%) of its final value

Rise time indicates speed of response.

Question 19

How does increasing the damping ratio affect overshoot?

  1. Overshoot decreases
  2. Overshoot is unchanged
  3. Overshoot becomes infinite
  4. Overshoot increases
Show answer & solution

Answer: (A) Overshoot decreases

ζ of about 0.4–0.8 is a common design range.

Question 20

What is the response of a first-order system to a unit step after one time constant?

  1. About 36.8%
  2. About 50%
  3. About 63.2% of the final value
  4. About 100%
Show answer & solution

Answer: (C) About 63.2% of the final value

After 5τ it is above 99%.

Question 21

What does the acceleration error constant Ka relate to?

  1. Steady-state error for a parabolic input
  2. Step error
  3. Impulse error
  4. Ramp error
Show answer & solution

Answer: (A) Steady-state error for a parabolic input

Ka = lim s→0 of s²G(s).

Question 22

Which system type has zero steady-state error to both step and ramp inputs?

  1. Type 1
  2. Type −1
  3. Type 0
  4. Type 2
Show answer & solution

Answer: (D) Type 2

Type 2 systems have two integrators.

Question 23

What is the effect of increasing the forward gain of a type-0 system on its steady-state step error?

  1. It has no effect
  2. The steady-state error decreases
  3. The steady-state error increases
  4. It becomes infinite
Show answer & solution

Answer: (B) The steady-state error decreases

ess = 1/(1 + Kp).

Question 24

What is the velocity error constant Kv of G(s) = 10/(s(s + 2))?

  1. 2
  2. 5
  3. 10
  4. 20
Show answer & solution

Answer: (B) 5

Kv = lim s→0 sG(s) = 10/2.

Question 25

What is the steady-state error of G(s) = 10/(s(s + 2)) with unity feedback to a unit ramp input?

  1. 0
  2. 0.2
  3. 0.5
  4. 5
Show answer & solution

Answer: (B) 0.2

ess = 1/Kv = 1/5.

Question 26

What is the natural frequency of a system with characteristic equation s² + 4s + 16 = 0?

  1. 2 rad/s
  2. 4 rad/s
  3. 8 rad/s
  4. 16 rad/s
Show answer & solution

Answer: (B) 4 rad/s

ωn² = 16.

Question 27

What is the damping ratio of a system with characteristic equation s² + 4s + 16 = 0?

  1. 0.25
  2. 0.5
  3. 1
  4. 2
Show answer & solution

Answer: (B) 0.5

2ζωn = 4, so ζ = 4/8.

Practice these 27 questions interactively →