What is the condition for stability of a linear time-invariant system?
Show answer & solution
Answer: (B) All closed-loop poles lie in the left half of the s-plane
Left half-plane poles give decaying responses.
Electrical Engineering · Control Systems
25 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the condition for stability of a linear time-invariant system?
Answer: (B) All closed-loop poles lie in the left half of the s-plane
Left half-plane poles give decaying responses.
What does BIBO stability mean?
Answer: (B) Every bounded input produces a bounded output
BIBO stability requires all poles in the left half-plane.
What does the Routh–Hurwitz criterion determine?
Answer: (C) The number of characteristic equation roots in the right half of the s-plane
It works without solving the equation.
What does the number of sign changes in the first column of the Routh array indicate?
Answer: (D) The number of roots in the right half of the s-plane
No sign changes means stable (if no zero rows).
What is a necessary (but not sufficient) condition for stability of a characteristic polynomial?
Answer: (A) All coefficients are present and have the same sign
Further Routh analysis is needed for third and higher order.
For what range of K is the system with characteristic equation s³ + 2s² + 3s + K = 0 stable?
Answer: (C) 0 < K < 6
The s¹ row element (6 − K)/2 must be positive and K > 0.
What is marginal stability?
Answer: (B) A condition with non-repeated poles on the imaginary axis, giving sustained oscillations
Small parameter changes can make the system unstable.
What is done when a zero appears in the first column of a Routh array but the rest of the row is non-zero?
Answer: (D) It is replaced by a small positive number ε
The limit as ε → 0 is then examined.
What does a complete row of zeros in a Routh array indicate?
Answer: (A) Symmetrical roots, such as imaginary-axis pairs, found from an auxiliary equation
The auxiliary polynomial gives the symmetric roots.
What does the Nyquist criterion relate?
Answer: (D) Encirclements of the −1 point by the open-loop plot to closed-loop right half-plane poles
Z = N + P is the Nyquist relation.
What is the gain margin of a control system?
Answer: (B) The factor by which gain can be increased before the system becomes unstable
It is measured at the phase crossover frequency.
What is the phase margin of a control system?
Answer: (A) The additional phase lag needed at gain crossover to bring the system to instability
A positive phase margin indicates stability for minimum-phase systems.
What phase margin is generally considered good for a control system?
Answer: (C) About 30° to 60°
Larger margins give better damping but slower response.
What does a negative gain margin (in dB) indicate for a minimum-phase system?
Answer: (B) The closed-loop system is unstable
Gain must be reduced to restore stability.
What is the effect of adding a pure time delay to a feedback loop?
Answer: (C) It adds phase lag and reduces phase margin, tending towards instability
Delays are common in process control.
What is absolute stability?
Answer: (D) Whether a system is stable or unstable
Relative stability measures margins from instability.
What is relative stability?
Answer: (A) A measure of how close a stable system is to instability, for example by its gain and phase margins
Better relative stability means less oscillation.
In which part of the s-plane do poles produce growing oscillations?
Answer: (A) Complex poles in the right half-plane
Positive real parts give growing responses.
What is the Routh array first column for the polynomial s² + 3s + 2?
Answer: (B) 1, 3, 2 with no sign change, so the system is stable
The roots are −1 and −2.
How many right half-plane roots does s³ − s² + s + 1 have if its Routh first column is 1, −1, 2, 1?
Answer: (D) Two
There are two sign changes: 1 to −1 and −1 to 2.
What does a pole at the origin of a closed-loop system indicate?
Answer: (A) A marginally stable integrating response
A single pole at zero gives a constant or ramp-like response.
What does Z = N + P mean in the Nyquist criterion?
Answer: (A) Closed-loop RHP poles equal clockwise encirclements of −1 plus open-loop RHP poles
For stability Z must be zero.
What is the gain margin in dB if the open-loop magnitude at phase crossover is 0.5?
Answer: (C) About 6 dB
GM = 20 log(1/0.5) ≈ 6 dB.
What happens to the stability of most control systems as loop gain increases without limit?
Answer: (B) They tend to become less stable and may become unstable
Root locus and Bode plots show this trend.
What does the Hurwitz criterion use to test stability?
Answer: (D) Determinants formed from the characteristic equation coefficients
All Hurwitz determinants must be positive.