Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Mass Transfer: Drying

Chemical Engineering · Mass Transfer

28 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is drying?

  1. Separation of gases
  2. Removal of solvent by distillation
  3. Concentration of solutions by boiling
  4. Removal of relatively small amounts of moisture from a solid, usually by thermal means
Show answer & solution

Answer: (D) Removal of relatively small amounts of moisture from a solid, usually by thermal means

Evaporation removes larger amounts of water from liquids.

Question 2

What is equilibrium moisture content?

  1. The moisture content of a solid in equilibrium with air of given humidity and temperature
  2. The total moisture
  3. The moisture at the start of drying
  4. The free moisture
Show answer & solution

Answer: (A) The moisture content of a solid in equilibrium with air of given humidity and temperature

It cannot be removed by air at those conditions.

Question 3

What is free moisture?

  1. The total moisture
  2. The moisture in excess of the equilibrium moisture content, removable under given conditions
  3. The water of crystallisation
  4. The bound moisture
Show answer & solution

Answer: (B) The moisture in excess of the equilibrium moisture content, removable under given conditions

Free moisture = X − X*.

Question 4

What is bound moisture?

  1. Moisture on the surface only
  2. Moisture in the air
  3. Moisture exerting a vapour pressure lower than pure water at the same temperature
  4. Moisture exerting the same vapour pressure as pure water
Show answer & solution

Answer: (C) Moisture exerting a vapour pressure lower than pure water at the same temperature

It is held in fine capillaries or by adsorption.

Question 5

What is the constant-rate period of drying?

  1. The stage where the surface stays saturated and drying rate is controlled by external heat and mass transfer
  2. The stage where rate falls with moisture
  3. The stage with no drying
  4. The stage at equilibrium
Show answer & solution

Answer: (A) The stage where the surface stays saturated and drying rate is controlled by external heat and mass transfer

The surface temperature equals the wet bulb temperature.

Question 6

What is the surface temperature of a solid during the constant-rate drying period with convective air drying?

  1. The boiling point
  2. Approximately the wet bulb temperature of the air
  3. The dry bulb temperature
  4. The dew point
Show answer & solution

Answer: (B) Approximately the wet bulb temperature of the air

Heat supply balances evaporation as at a wet bulb.

Question 7

What is the critical moisture content?

  1. The equilibrium moisture
  2. Zero moisture
  3. The initial moisture
  4. The moisture content at which the constant-rate period ends and the falling-rate period begins
Show answer & solution

Answer: (D) The moisture content at which the constant-rate period ends and the falling-rate period begins

It depends on drying rate and material thickness.

Question 8

What controls the drying rate in the falling-rate period?

  1. External air velocity only
  2. Air humidity only
  3. Internal movement of moisture by diffusion or capillary flow
  4. Radiation only
Show answer & solution

Answer: (C) Internal movement of moisture by diffusion or capillary flow

Rate falls as the surface dries out.

Question 9

How is drying time in the constant-rate period found?

  1. By Fick's second law only
  2. By the critical radius
  3. By dividing free moisture removed by the constant drying rate per unit area, times dry solid per area
  4. By the falling-rate equation only
Show answer & solution

Answer: (C) By dividing free moisture removed by the constant drying rate per unit area, times dry solid per area

t = (Ls/A)(X₁ − Xc)/Rc.

Question 10

What is a rotary dryer?

  1. A stationary tray dryer
  2. A spray dryer
  3. A freeze dryer
  4. A slightly inclined rotating cylinder in which solids are lifted by flights through hot gas
Show answer & solution

Answer: (D) A slightly inclined rotating cylinder in which solids are lifted by flights through hot gas

It is used for minerals, fertilisers and sugar.

Question 11

What is a spray dryer used for?

  1. Producing dry powder by atomising a solution or slurry into hot gas
  2. Drying wood
  3. Drying sheets
  4. Drying large lumps
Show answer & solution

Answer: (A) Producing dry powder by atomising a solution or slurry into hot gas

Milk powder and detergent powder are spray dried.

Question 12

What is the main advantage of freeze drying?

  1. It is the cheapest method
  2. It preserves heat-sensitive products by sublimation of ice under vacuum
  3. It needs no vacuum
  4. It works at high temperature
Show answer & solution

Answer: (B) It preserves heat-sensitive products by sublimation of ice under vacuum

It is used for pharmaceuticals, coffee and food.

Question 13

What is a fluidised bed dryer?

  1. A dryer with trays
  2. A belt conveyor
  3. A dryer in which hot gas fluidises the particles, giving rapid uniform drying
  4. A rotating drum only
Show answer & solution

Answer: (C) A dryer in which hot gas fluidises the particles, giving rapid uniform drying

It suits granular materials such as fertilisers and pharmaceuticals.

Question 14

What is a drum dryer used for?

  1. Drying gases
  2. Drying large rocks
  3. Drying in vacuum only
  4. Drying solutions or slurries as thin films on heated rotating drums
Show answer & solution

Answer: (D) Drying solutions or slurries as thin films on heated rotating drums

Products are scraped off as flakes.

Question 15

What is a tray dryer?

  1. A spray dryer
  2. A batch dryer where material on trays is dried by circulating hot air
  3. A continuous rotary dryer
  4. A fluid bed dryer
Show answer & solution

Answer: (B) A batch dryer where material on trays is dried by circulating hot air

It is simple and used for small batches.

Question 16

What is moisture content on a dry basis?

  1. Mass of water per unit mass of bone-dry solid
  2. Mass of water per unit mass of wet solid
  3. Mass of solid per unit mass of water
  4. Volume of water per volume
Show answer & solution

Answer: (A) Mass of water per unit mass of bone-dry solid

Dry-basis values can exceed 100%.

Question 17

What is the dry-basis moisture content of a solid containing 20% water on a wet basis?

  1. 0.167 kg/kg dry solid
  2. 0.2 kg/kg dry solid
  3. 0.25 kg/kg dry solid
  4. 0.8 kg/kg dry solid
Show answer & solution

Answer: (C) 0.25 kg/kg dry solid

X = 0.2/0.8.

Question 18

Why is recirculation of exhaust air used in some dryers?

  1. To reduce efficiency
  2. To raise dust emissions
  3. To cool the product
  4. To improve thermal efficiency and control humidity of the drying air
Show answer & solution

Answer: (D) To improve thermal efficiency and control humidity of the drying air

Too much recirculation slows drying.

Question 19

What is case hardening in drying?

  1. Formation of a hard dry surface layer that slows further internal drying
  2. Dust formation
  3. Uniform drying
  4. Overheating the dryer
Show answer & solution

Answer: (A) Formation of a hard dry surface layer that slows further internal drying

It occurs when surface drying is too rapid.

Question 20

What is the effect of increasing air velocity on drying rate in the constant-rate period?

  1. It has no effect
  2. It increases the rate
  3. It stops drying
  4. It decreases the rate
Show answer & solution

Answer: (B) It increases the rate

Higher velocity raises the heat and mass transfer coefficients.

Question 21

Which dryer is commonly used for drying grain such as rice and wheat in Pakistan?

  1. Continuous flow column or batch bin dryer with heated air
  2. Drum dryer
  3. Freeze dryer
  4. Spray dryer
Show answer & solution

Answer: (A) Continuous flow column or batch bin dryer with heated air

Proper drying prevents fungal growth and aflatoxin.

Question 22

What is sun drying?

  1. Freeze drying
  2. Vacuum drying
  3. Microwave drying
  4. Drying of products such as dates, apricots and chillies by direct solar radiation and air
Show answer & solution

Answer: (D) Drying of products such as dates, apricots and chillies by direct solar radiation and air

Solar dryers improve hygiene and speed.

Question 23

What does a drying rate curve plot?

  1. Humidity against temperature
  2. Pressure against time
  3. Drying rate against moisture content
  4. Temperature against time only
Show answer & solution

Answer: (C) Drying rate against moisture content

It shows the constant and falling-rate periods.

Question 24

What does a vacuum dryer allow?

  1. Drying at very high temperature only
  2. Drying of gases
  3. Drying at low temperature, suitable for heat-sensitive materials and solvent recovery
  4. Drying with no heat
Show answer & solution

Answer: (C) Drying at low temperature, suitable for heat-sensitive materials and solvent recovery

Lower pressure lowers the boiling point of moisture.

Question 25

What is a pneumatic (flash) dryer?

  1. A tray dryer
  2. A dryer in which wet particles are carried in a hot gas stream for very short contact time
  3. A freeze dryer
  4. A rotating drum
Show answer & solution

Answer: (B) A dryer in which wet particles are carried in a hot gas stream for very short contact time

It suits fine materials with surface moisture.

Question 26

Which dryer is commonly used for milk powder production?

  1. Belt conveyor
  2. Tray dryer only
  3. Spray dryer
  4. Rotary kiln
Show answer & solution

Answer: (C) Spray dryer

Atomisers or nozzles produce fine droplets.

Question 27

How does increasing air temperature affect drying rate in the constant-rate period?

  1. It decreases the rate
  2. It stops drying
  3. It has no effect
  4. It increases the rate by raising the temperature difference to the wet bulb
Show answer & solution

Answer: (D) It increases the rate by raising the temperature difference to the wet bulb

Product heat sensitivity limits temperature.

Question 28

What is the purpose of flights inside a rotary dryer?

  1. To lift and shower solids through the hot gas stream
  2. To heat the gas
  3. To support the drum
  4. To crush the solids
Show answer & solution

Answer: (A) To lift and shower solids through the hot gas stream

They increase gas–solid contact.

Practice these 28 questions interactively →