What is crystallisation?
Show answer & solution
Answer: (B) Formation of solid particles from a solution, melt or vapour
It gives a pure product in a convenient form.
Chemical Engineering · Mass Transfer
26 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is crystallisation?
Answer: (B) Formation of solid particles from a solution, melt or vapour
It gives a pure product in a convenient form.
What is the driving force for crystallisation?
Answer: (D) Supersaturation
Supersaturation can be expressed as concentration difference or ratio.
How can supersaturation be created?
Answer: (B) By cooling, evaporating solvent, adding an anti-solvent or chemical reaction
The method depends on the solubility curve.
Which method is used when solubility of a substance changes little with temperature, such as common salt?
Answer: (A) Evaporative crystallisation
NaCl solubility is almost independent of temperature.
What is the metastable zone in crystallisation?
Answer: (C) A supersaturated region where existing crystals grow but spontaneous nucleation is unlikely
Industrial crystallisers operate within it.
What is primary nucleation?
Answer: (B) Formation of new crystals without existing crystals of the solute present
It can be homogeneous or heterogeneous.
What is secondary nucleation?
Answer: (C) Formation of new nuclei due to existing crystals, for example by collision
It dominates in industrial crystallisers.
What is the ΔL law (McCabe's law) of crystal growth?
Answer: (A) Geometrically similar crystals of the same material grow at the same linear rate regardless of size
It simplifies crystal size distribution calculations.
What is seeding in crystallisation?
Answer: (D) Adding small crystals to a supersaturated solution to control nucleation and size
Seeding is common in sugar boiling.
What is an MSMPR crystalliser?
Answer: (B) A mixed-suspension, mixed-product-removal crystalliser used for size distribution analysis
Its population balance gives nucleation and growth rates.
Which crystalliser type is common for large-scale production of salts?
Answer: (D) Forced-circulation evaporative crystalliser
Draft-tube baffle crystallisers give larger crystals.
What is the yield of a cooling crystalliser mainly determined by?
Answer: (C) The difference between solubility at the initial and final temperatures
Mass balance with solubility data gives the yield.
What is mother liquor?
Answer: (A) The solution remaining after crystals have been separated
It is often recycled to improve yield.
What is caking of crystals?
Answer: (C) Crystals sticking together on storage due to moisture and pressure
Uniform size, dry storage and anti-caking agents reduce it.
What is the habit of a crystal?
Answer: (A) Its external shape, which depends on relative growth rates of faces
Impurities and solvent can change habit.
What is the effect of rapid cooling on crystal size?
Answer: (B) It generally gives many small crystals
High supersaturation favours nucleation over growth.
What is massecuite in sugar production?
Answer: (D) A mixture of sugar crystals and molasses discharged from vacuum pans
Centrifuges separate the crystals.
What is final molasses in sugar manufacture?
Answer: (C) The residual syrup from which no more sugar can be economically crystallised
In Pakistan final molasses is used by distilleries to make ethanol.
What is melt crystallisation?
Answer: (B) Purification by partial freezing of a molten mixture without solvent
It is used for p-xylene and naphthalene.
What is the purpose of washing crystals after centrifuging?
Answer: (A) To remove adhering mother liquor and impurities
Washing reduces yield slightly by dissolution.
What is the solubility curve used for in crystallisation?
Answer: (B) To show the equilibrium concentration of solute against temperature
Supersolubility curves mark the metastable limit.
What is a Swenson–Walker crystalliser?
Answer: (D) A continuous cooling trough crystalliser with a slow-moving spiral agitator
It is an early continuous cooling crystalliser.
What is the crystal size distribution (CSD)?
Answer: (B) The distribution of crystal sizes in a product
CSD affects filtration, washing and product quality.
What is Ostwald ripening?
Answer: (C) Growth of large crystals at the expense of small ones, which dissolve due to higher solubility
Small crystals have higher solubility (Gibbs–Thomson effect).
How does an anti-solvent produce crystals?
Answer: (A) It lowers the solubility of the solute in the mixed solvent
Called drowning-out crystallisation.
What is the purpose of a draft tube in a crystalliser?
Answer: (D) To circulate the suspension and control supersaturation and crystal size
Draft-tube baffle (DTB) crystallisers give coarse crystals.