What is adsorption?
Show answer & solution
Answer: (D) Accumulation of molecules from a fluid on the surface of a solid
The solid is the adsorbent and the species is the adsorbate.
Chemical Engineering · Mass Transfer
28 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is adsorption?
Answer: (D) Accumulation of molecules from a fluid on the surface of a solid
The solid is the adsorbent and the species is the adsorbate.
What is the difference between physical adsorption and chemisorption?
Answer: (A) Physical adsorption involves weak van der Waals forces; chemisorption involves chemical bonding
Chemisorption is usually a monolayer.
What does the Langmuir isotherm assume?
Answer: (D) Monolayer adsorption on a uniform surface with no interaction between adsorbed molecules
q = qmKp/(1 + Kp).
Which isotherm describes multilayer adsorption and is used to measure surface area?
Answer: (B) BET isotherm
Nitrogen adsorption at 77 K is used.
What is the Freundlich isotherm?
Answer: (C) An empirical relation q = K C^(1/n) for heterogeneous surfaces
It is widely used for liquid-phase adsorption.
How does adsorption capacity generally change with temperature for physical adsorption?
Answer: (A) It decreases as temperature increases
Adsorption is exothermic.
Which adsorbent is widely used to remove colour and organic impurities from liquids?
Answer: (B) Activated carbon
It has very high surface area, about 500–1,500 m²/g.
Which adsorbent is commonly used as a desiccant for drying gases?
Answer: (C) Silica gel or activated alumina
Molecular sieves give very low dew points.
What are molecular sieves?
Answer: (D) Crystalline zeolites with uniform pores that adsorb molecules by size
Type 3A is used for ethanol dehydration.
What is the breakthrough curve in fixed-bed adsorption?
Answer: (D) A plot of outlet concentration against time as the bed becomes saturated
The bed is regenerated at the breakpoint.
What is pressure swing adsorption (PSA)?
Answer: (A) Separation of gases by adsorbing at high pressure and regenerating at low pressure
It is used for oxygen generators and hydrogen purification.
What is temperature swing adsorption?
Answer: (C) Regenerating an adsorbent by heating it to drive off the adsorbate
It is used for gas dehydration.
What is ion exchange?
Answer: (B) Reversible exchange of ions between a solid resin and a solution
It is used to soften and demineralise boiler feed water.
What does a cation exchange resin in hydrogen form remove from water?
Answer: (C) Cations such as calcium, magnesium and sodium, releasing H⁺
Anion resins remove chloride and sulphate.
What is reverse osmosis?
Answer: (D) Applying pressure above osmotic pressure to force solvent through a semipermeable membrane, leaving solutes behind
It is used for desalination and drinking water plants.
What is the main difference between ultrafiltration and reverse osmosis?
Answer: (B) Ultrafiltration removes macromolecules and colloids at lower pressure; RO removes dissolved salts
Microfiltration removes larger particles still.
What is concentration polarisation in membrane processes?
Answer: (A) Build-up of rejected solute near the membrane surface, reducing flux
Higher cross-flow velocity reduces it.
What is the flux of a membrane?
Answer: (B) The volume of permeate per unit membrane area per unit time
Common units are L/(m²·h).
What is the rejection of a membrane?
Answer: (A) The fraction of solute retained by the membrane
Rejection = 1 − Cpermeate/Cfeed.
What is electrodialysis?
Answer: (C) Removal of ions from water using ion-exchange membranes and an electric field
It is used for brackish water.
What is gas permeation through membranes used for?
Answer: (D) Separating gases such as hydrogen recovery and CO₂ removal from natural gas
Separation depends on solubility and diffusivity in the membrane.
What is pervaporation?
Answer: (C) Membrane separation where a liquid feed partly vaporises through the membrane under vacuum
It is used to dehydrate ethanol and solvents.
What is regeneration of activated carbon?
Answer: (B) Removing adsorbed substances, often by steam or thermal treatment, to restore capacity
Thermal reactivation is done in kilns.
What is the mass transfer zone in a fixed-bed adsorber?
Answer: (D) The region of the bed where adsorption is actively taking place
A short zone indicates efficient use of the bed.
What is the main use of activated carbon in water treatment plants?
Answer: (B) Removing taste, odour, colour and organic micropollutants
Granular or powdered carbon is used.
What is the purpose of a pre-treatment step before reverse osmosis?
Answer: (A) To remove suspended solids, chlorine and scaling ions that foul or damage membranes
Antiscalants and cartridge filters are common.
What is the approximate osmotic pressure of seawater?
Answer: (C) About 25 to 28 bar
Seawater RO operates at about 55–70 bar.
What is the recovery of an RO system?
Answer: (C) The fraction of feed water that becomes permeate
Higher recovery concentrates the brine and raises scaling risk.