What property difference does distillation use to separate liquid mixtures?
Show answer & solution
Answer: (C) Difference in volatility (vapour pressure)
Components with higher volatility concentrate in the vapour.
Chemical Engineering · Mass Transfer
41 questions, each with the answer and a worked solution.
Practice interactively and track your score →What property difference does distillation use to separate liquid mixtures?
Answer: (C) Difference in volatility (vapour pressure)
Components with higher volatility concentrate in the vapour.
What is relative volatility?
Answer: (B) The ratio of the volatility of one component to that of another, (yA/xA)/(yB/xB)
For ideal systems α = PA°/PB°.
What happens to separation by distillation when relative volatility is 1?
Answer: (C) Separation by ordinary distillation is impossible
Azeotropes have α = 1.
What is the equilibrium relation for constant relative volatility?
Answer: (D) y = αx/(1 + (α − 1)x)
It gives the y–x equilibrium curve.
What does the Rayleigh equation describe?
Answer: (A) Simple batch (differential) distillation
ln(F/W) = ∫ dx/(y − x).
What is flash (equilibrium) distillation?
Answer: (B) Partial vaporisation of a feed so that vapour and liquid leave in equilibrium
It is a single-stage process.
What is the McCabe–Thiele method?
Answer: (B) A graphical method for finding the number of ideal stages in binary distillation
It assumes constant molar overflow.
What is the key assumption of the McCabe–Thiele method?
Answer: (D) Constant molar overflow, from equal molar latent heats of the components
This makes operating lines straight.
What is the slope of the rectifying section operating line?
Answer: (C) R/(R + 1), where R is the reflux ratio
The intercept is xD/(R + 1).
What is the slope of the rectifying operating line when the reflux ratio is 3?
Answer: (B) 0.75
R/(R + 1) = 3/4.
What is the y-intercept of the rectifying operating line with xD = 0.95 and R = 4?
Answer: (A) 0.19
xD/(R + 1) = 0.95/5.
What is the q-line in McCabe–Thiele construction?
Answer: (C) A line describing feed condition, with slope q/(q − 1)
It passes through x = xF on the diagonal.
What is the value of q for a saturated liquid feed?
Answer: (D) 1
The q-line is then vertical.
What is the value of q for saturated vapour feed?
Answer: (A) 0
The q-line is then horizontal.
What is the value of q for subcooled liquid feed?
Answer: (B) Greater than 1
Extra vapour condenses to heat the feed to its boiling point.
What happens at total reflux?
Answer: (D) The minimum number of stages is required and no product is withdrawn
Operating lines coincide with the diagonal.
Which equation gives the minimum number of stages at total reflux?
Answer: (A) Fenske equation
Nmin = ln[(xD/(1 − xD))((1 − xW)/xW)]/ln α.
Which equation gives the minimum reflux ratio for multicomponent systems?
Answer: (C) Underwood equation
For binary systems it can be found graphically from the pinch.
What happens at minimum reflux ratio?
Answer: (B) An infinite number of stages is needed because a pinch forms
Optimum reflux is typically 1.2–1.5 times minimum.
Which correlation relates the number of stages to reflux ratio between minimum and total reflux?
Answer: (D) Gilliland correlation
It is used for shortcut design.
What is the optimum reflux ratio?
Answer: (C) The ratio that minimises total annual cost of column plus utilities
Higher reflux raises energy cost but reduces stages.
What is Murphree tray efficiency?
Answer: (A) The ratio of actual change in vapour composition across a tray to the change if vapour left in equilibrium
Overall efficiency = ideal stages/actual trays.
What is the overall column efficiency if 12 ideal stages need 20 actual trays?
Answer: (C) 60%
12/20 × 100.
What is weeping on a sieve tray?
Answer: (A) Liquid leaking through tray holes at low vapour rates
It reduces tray efficiency.
What is entrainment in tray columns?
Answer: (D) Liquid droplets carried by rising vapour to the tray above
Excess entrainment leads to flooding.
What is the function of the downcomer on a tray?
Answer: (B) To carry liquid from one tray to the one below
Downcomer backup can cause flooding.
Which tray type is the simplest and cheapest?
Answer: (A) Sieve tray
Valve trays have a wider turndown.
What is steam distillation used for?
Answer: (B) Separating heat-sensitive, water-immiscible high-boiling compounds at lower temperature
Essential oils are recovered this way.
Why does steam distillation lower the distillation temperature?
Answer: (D) The mixture boils when the sum of vapour pressures of water and the organic equals total pressure
Immiscible liquids each exert full vapour pressure.
What is vacuum distillation used for?
Answer: (C) Separating high-boiling or heat-sensitive materials at reduced temperature
Refinery vacuum units process atmospheric residue.
What is azeotropic distillation?
Answer: (D) Adding an entrainer that forms a new azeotrope to break an existing azeotrope
Benzene or cyclohexane was used to dehydrate ethanol.
What is extractive distillation?
Answer: (A) Adding a high-boiling solvent that changes relative volatilities of the components
Ethylene glycol can be used for ethanol dehydration.
How is fuel-grade anhydrous ethanol produced from molasses-based 95% ethanol in Pakistani distilleries?
Answer: (B) By breaking the azeotrope, commonly with molecular sieve dehydration
Ordinary distillation stops at the azeotrope.
What is the stripping section of a distillation column?
Answer: (C) The section below the feed point
It removes volatile components from the liquid.
What is the reflux ratio?
Answer: (C) The ratio of liquid returned to the column to distillate withdrawn
R = L/D.
What is a partial reboiler counted as in stage calculations?
Answer: (A) One equilibrium stage
A partial condenser also counts as a stage.
What does the Ponchon–Savarit method account for that McCabe–Thiele does not?
Answer: (D) Enthalpy effects using enthalpy–concentration diagrams
It does not assume constant molar overflow.
What are the light key and heavy key in multicomponent distillation?
Answer: (B) The two components whose separation is specified, one mostly in distillate and one mostly in bottoms
Shortcut methods use the keys.
What is the bubble point of a liquid mixture?
Answer: (B) The temperature at which the first vapour bubble forms on heating at constant pressure
Σ Ki xi = 1 at the bubble point.
What is the dew point of a vapour mixture?
Answer: (D) The temperature at which the first drop of liquid forms on cooling at constant pressure
Σ yi/Ki = 1 at the dew point.
What is the purpose of the reflux drum?
Answer: (A) To collect condensed overhead liquid and supply reflux and distillate
It also separates water in some columns.