Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Mass Transfer: Diffusion and Coefficients

Chemical Engineering · Mass Transfer

29 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What does Fick's first law of diffusion state?

  1. The flux is proportional to pressure squared
  2. The flux is independent of concentration
  3. The flux is proportional to temperature difference
  4. The molar flux of a species is proportional to the negative of its concentration gradient
Show answer & solution

Answer: (D) The molar flux of a species is proportional to the negative of its concentration gradient

J_A = −D_AB (dC_A/dz).

Question 2

What is the SI unit of molecular diffusivity?

  1. mol/m³
  2. m²/s
  3. kg/(m²·s)
  4. m/s
Show answer & solution

Answer: (B) m²/s

Kinematic viscosity and thermal diffusivity have the same unit.

Question 3

What is the typical order of magnitude of diffusivity in gases at atmospheric pressure?

  1. About 10⁻¹ m²/s
  2. About 10⁻¹⁴ m²/s
  3. About 10⁻⁵ m²/s
  4. About 10⁻⁹ m²/s
Show answer & solution

Answer: (C) About 10⁻⁵ m²/s

Liquid diffusivities are about 10⁻⁹ m²/s.

Question 4

What is the typical order of magnitude of diffusivity in liquids?

  1. About 1 m²/s
  2. About 10⁻² m²/s
  3. About 10⁻⁵ m²/s
  4. About 10⁻⁹ m²/s
Show answer & solution

Answer: (D) About 10⁻⁹ m²/s

Diffusion in solids is slower still.

Question 5

How does gas-phase diffusivity vary with pressure at constant temperature?

  1. It is inversely proportional to pressure
  2. It is directly proportional to pressure
  3. It is independent of pressure
  4. It varies with pressure squared
Show answer & solution

Answer: (A) It is inversely proportional to pressure

D_AB ∝ T^1.75/P by the Fuller correlation.

Question 6

How does gas-phase diffusivity vary with temperature according to kinetic theory?

  1. In proportion to T⁴
  2. Inversely with temperature
  3. In proportion to T^1.5 (about T^1.75 in empirical correlations)
  4. Independently of temperature
Show answer & solution

Answer: (C) In proportion to T^1.5 (about T^1.75 in empirical correlations)

Higher molecular speeds increase diffusion.

Question 7

Which equation is used to estimate diffusivities of solutes in dilute liquid solutions?

  1. Antoine equation
  2. Wilke–Chang equation
  3. Ergun equation
  4. Dittus–Boelter equation
Show answer & solution

Answer: (B) Wilke–Chang equation

It includes solvent viscosity and solute molar volume.

Question 8

What does the Stokes–Einstein equation relate?

  1. The diffusivity of large spherical molecules to temperature and solvent viscosity
  2. Heat flux to temperature gradient
  3. Vapour pressure to temperature
  4. Drag to velocity in gases
Show answer & solution

Answer: (A) The diffusivity of large spherical molecules to temperature and solvent viscosity

D = kT/(6πμr).

Question 9

What is equimolar counter-diffusion?

  1. Diffusion in which equal moles of A and B move in opposite directions
  2. Diffusion of one species only
  3. Diffusion with no concentration gradient
  4. Diffusion of A through stagnant B
Show answer & solution

Answer: (A) Diffusion in which equal moles of A and B move in opposite directions

It approximates distillation of components with similar latent heats.

Question 10

Which situation is an example of diffusion of A through stagnant (non-diffusing) B?

  1. Equimolar distillation
  2. Evaporation of water into still air in a tube
  3. Heat conduction
  4. Mixing of two gases at equal rates
Show answer & solution

Answer: (B) Evaporation of water into still air in a tube

Absorption of a gas into a liquid with insoluble carrier gas is another example.

Question 11

What is the log mean partial pressure of B used for?

  1. Calculating heat transfer
  2. Calculating pump head
  3. Calculating flux of A diffusing through stagnant B
  4. Calculating vapour pressure
Show answer & solution

Answer: (C) Calculating flux of A diffusing through stagnant B

N_A = D P (pA1 − pA2)/(RT z pBlm).

Question 12

What is the Schmidt number?

  1. ρVL/μ
  2. hL/k
  3. kL/D
  4. μ/(ρD), the ratio of momentum diffusivity to mass diffusivity
Show answer & solution

Answer: (D) μ/(ρD), the ratio of momentum diffusivity to mass diffusivity

It is the mass-transfer analogue of the Prandtl number.

Question 13

What is the Sherwood number?

  1. hL/k
  2. μ/(ρD)
  3. kL/D, the ratio of convective mass transfer to molecular diffusion
  4. ρVL/μ
Show answer & solution

Answer: (C) kL/D, the ratio of convective mass transfer to molecular diffusion

It is the mass-transfer analogue of the Nusselt number.

Question 14

What is the Lewis number?

  1. The ratio of thermal diffusivity to mass diffusivity
  2. The ratio of momentum to heat diffusivity
  3. The ratio of Sh to Nu
  4. The ratio of Re to Pr
Show answer & solution

Answer: (A) The ratio of thermal diffusivity to mass diffusivity

Le = Sc/Pr; for air–water vapour it is close to 1.

Question 15

What does the Chilton–Colburn analogy relate?

  1. Boiling and condensation
  2. Heat, mass and momentum transfer: jH = jD = f/2
  3. Vapour pressure and boiling point
  4. Radiation and conduction
Show answer & solution

Answer: (B) Heat, mass and momentum transfer: jH = jD = f/2

jD = Sh/(Re Sc^(1/3)).

Question 16

What is the two-film theory of mass transfer?

  1. Mass transfer occurs only by turbulence
  2. Only the liquid film has resistance always
  3. There is no interface resistance
  4. Resistance to transfer is confined to thin stagnant films on each side of the interface, with equilibrium at the interface
Show answer & solution

Answer: (D) Resistance to transfer is confined to thin stagnant films on each side of the interface, with equilibrium at the interface

Proposed by Whitman.

Question 17

According to the film theory, how does the mass transfer coefficient depend on diffusivity?

  1. In proportion to √D
  2. In proportion to D²
  3. Independently of D
  4. In proportion to D
Show answer & solution

Answer: (D) In proportion to D

k = D/δ.

Question 18

According to the penetration theory, how does the mass transfer coefficient depend on diffusivity?

  1. In proportion to √D
  2. In proportion to D
  3. In proportion to D²
  4. Independently of D
Show answer & solution

Answer: (A) In proportion to √D

Higbie's theory assumes short contact times.

Question 19

Who proposed the surface renewal theory of mass transfer?

  1. Higbie
  2. Danckwerts
  3. Whitman
  4. Fick
Show answer & solution

Answer: (B) Danckwerts

Surface elements are replaced randomly by fresh fluid.

Question 20

When is a gas absorption process said to be gas-film controlled?

  1. When the solute is sparingly soluble
  2. When both films have zero resistance
  3. When the solute is highly soluble in the liquid
  4. When the liquid is stagnant
Show answer & solution

Answer: (C) When the solute is highly soluble in the liquid

Ammonia absorption in water is gas-film controlled.

Question 21

When is a gas absorption process said to be liquid-film controlled?

  1. When the gas film is thick
  2. When the solute is highly soluble
  3. When the gas is pure
  4. When the solute is sparingly soluble in the liquid
Show answer & solution

Answer: (D) When the solute is sparingly soluble in the liquid

O₂ or CO₂ absorption in water is liquid-film controlled.

Question 22

How are the overall gas-phase coefficient KG and the individual coefficients related?

  1. 1/KG = kL/kG
  2. KG = kG + kL
  3. 1/KG = 1/kG + H/kL, where H is Henry's constant
  4. KG = kG × kL
Show answer & solution

Answer: (C) 1/KG = 1/kG + H/kL, where H is Henry's constant

The resistances add like series resistances.

Question 23

What is Knudsen diffusion?

  1. Diffusion in narrow pores where molecules collide more with pore walls than with each other
  2. Diffusion in solids only
  3. Diffusion at high pressure
  4. Diffusion in liquids
Show answer & solution

Answer: (A) Diffusion in narrow pores where molecules collide more with pore walls than with each other

It is important in catalyst pores and at low pressure.

Question 24

What does Fick's second law describe?

  1. Steady-state diffusion
  2. Unsteady-state diffusion, with concentration changing in time
  3. Heat conduction
  4. Flow in pipes
Show answer & solution

Answer: (B) Unsteady-state diffusion, with concentration changing in time

∂C/∂t = D ∂²C/∂z².

Question 25

What is the mass transfer driving force?

  1. The flow rate
  2. The total pressure
  3. The difference between actual concentration and equilibrium concentration
  4. The temperature only
Show answer & solution

Answer: (C) The difference between actual concentration and equilibrium concentration

No net transfer occurs at equilibrium.

Question 26

How does diffusivity in solids vary with temperature?

  1. It increases exponentially (Arrhenius type)
  2. It decreases with temperature
  3. It is constant
  4. It becomes zero
Show answer & solution

Answer: (A) It increases exponentially (Arrhenius type)

D = D₀ exp(−E/RT).

Question 27

What is the unit of the mass transfer coefficient kc?

  1. m²/s
  2. m/s
  3. mol/m³
  4. Pa
Show answer & solution

Answer: (B) m/s

Flux = kc ΔC.

Question 28

What is the mass transfer analogue of Fourier's law?

  1. Fick's law
  2. Newton's law of viscosity
  3. Darcy's law
  4. Stefan–Boltzmann law
Show answer & solution

Answer: (A) Fick's law

Flux is proportional to concentration gradient in both.

Question 29

What is molar flux N_A?

  1. The velocity of A only
  2. The concentration of A
  3. The mass of A
  4. The moles of A transferred per unit area per unit time relative to fixed coordinates
Show answer & solution

Answer: (D) The moles of A transferred per unit area per unit time relative to fixed coordinates

J_A is the flux relative to the molar average velocity.

Practice these 29 questions interactively →