Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Mine Ventilation & Environment: Ventilation Systems

Mining Engineering · Mine Ventilation & Environment

37 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What causes natural ventilation in mines?

  1. Water flowing in the mine
  2. Rock bursts
  3. Difference in air density between downcast and upcast shafts, mainly due to temperature
  4. The rotation of the earth
Show answer & solution

Answer: (C) Difference in air density between downcast and upcast shafts, mainly due to temperature

Warm, light air rises in the upcast and cool air sinks in the downcast.

Question 2

What is a downcast shaft?

  1. A shaft through which fresh air enters the mine
  2. A shaft used for water only
  3. A shaft through which return air leaves
  4. A blind shaft
Show answer & solution

Answer: (A) A shaft through which fresh air enters the mine

Downcast shafts carry intake air.

Question 3

What is an upcast shaft?

  1. A shaft without ventilation
  2. An escape shaft only
  3. A shaft through which fresh air enters
  4. A shaft through which return air leaves the mine
Show answer & solution

Answer: (D) A shaft through which return air leaves the mine

The main exhaust fan is usually at the upcast shaft.

Question 4

What is a forcing (blowing) ventilation system?

  1. Fans run alternately
  2. The fan draws air out of the mine
  3. The main fan pushes air into the mine, raising the pressure above atmospheric
  4. No fan is used
Show answer & solution

Answer: (C) The main fan pushes air into the mine, raising the pressure above atmospheric

Forcing systems are common in metal mines.

Question 5

What is an exhausting ventilation system?

  1. The fan pushes air in
  2. Two fans push air in together
  3. No fan is used
  4. The main fan draws air out of the mine, keeping the workings below atmospheric pressure
Show answer & solution

Answer: (D) The main fan draws air out of the mine, keeping the workings below atmospheric pressure

Exhausting systems are common in gassy coal mines.

Question 6

Why are exhausting systems often preferred in gassy coal mines?

  1. If the fan stops, mine pressure rises and temporarily slows gas emission from the goaf
  2. They need no fan
  3. They keep intakes full of gas
  4. They prevent all leakage
Show answer & solution

Answer: (A) If the fan stops, mine pressure rises and temporarily slows gas emission from the goaf

Air locks are needed at the upcast for hoisting.

Question 7

In which ventilation layout are the downcast and upcast shafts at opposite ends of the mine property?

  1. Central ventilation
  2. Boundary ventilation
  3. Auxiliary ventilation
  4. Homotropal ventilation
Show answer & solution

Answer: (B) Boundary ventilation

Boundary systems reduce leakage between intake and return.

Question 8

In which ventilation layout are the downcast and upcast shafts close together near the centre of the property?

  1. Antitropal ventilation
  2. Central ventilation
  3. Descensional ventilation
  4. Boundary ventilation
Show answer & solution

Answer: (B) Central ventilation

Central systems need good separation of intake and return airways.

Question 9

What is ascensional ventilation?

  1. Air flows upward through the working faces
  2. Air flows horizontally only
  3. Air does not pass the faces
  4. Air flows downward through the faces
Show answer & solution

Answer: (A) Air flows upward through the working faces

Upward airflow helps remove methane and heat, which rise naturally.

Question 10

What is homotropal ventilation?

  1. Air and mineral flow in opposite directions
  2. Air flows only at night
  3. Air and mineral flow in the same direction along the airway
  4. There is no mineral flow
Show answer & solution

Answer: (C) Air and mineral flow in the same direction along the airway

Antitropal ventilation has air and coal moving in opposite directions.

Question 11

Which ventilation is used for blind headings that the main airflow cannot reach?

  1. No ventilation is needed
  2. Boundary ventilation
  3. Natural ventilation only
  4. Auxiliary ventilation with fans and ducts
Show answer & solution

Answer: (D) Auxiliary ventilation with fans and ducts

Auxiliary fans deliver air to the face through ducting.

Question 12

What is a forcing auxiliary ventilation system?

  1. Air reaches the face by diffusion only
  2. A fan blows fresh air through a duct to the face, and contaminated air returns along the heading
  3. The main fan is placed at the face
  4. A fan draws air from the face through a duct
Show answer & solution

Answer: (B) A fan blows fresh air through a duct to the face, and contaminated air returns along the heading

Forcing systems give a strong air jet at the face.

Question 13

What is an exhausting auxiliary ventilation system?

  1. A fan draws air from the face through a duct, and fresh air enters along the heading
  2. Air is supplied by compressed air lines only
  3. A fan blows air to the face
  4. Air is not used
Show answer & solution

Answer: (A) A fan draws air from the face through a duct, and fresh air enters along the heading

Exhaust systems keep dust and fumes out of the roadway.

Question 14

What is an overlap auxiliary system?

  1. A single forcing duct
  2. A natural ventilation system
  3. A combination of forcing and exhausting ducts used together at the face
  4. A single exhaust duct
Show answer & solution

Answer: (C) A combination of forcing and exhausting ducts used together at the face

Overlap systems give good face ventilation and dust capture.

Question 15

What is the purpose of a ventilation door underground?

  1. To control water
  2. To support the roof
  3. To store explosives
  4. To stop or control airflow while allowing passage of people and vehicles
Show answer & solution

Answer: (D) To stop or control airflow while allowing passage of people and vehicles

Doors are often fitted in pairs to form an air lock.

Question 16

What is an air lock in mine ventilation?

  1. A fan housing
  2. Two doors spaced apart so that one is always closed when people pass
  3. A sealed fire area
  4. A blocked airway
Show answer & solution

Answer: (B) Two doors spaced apart so that one is always closed when people pass

Air locks prevent short-circuiting of air.

Question 17

What is a regulator in mine ventilation?

  1. A pressure gauge
  2. A fan motor
  3. A gas detector
  4. An adjustable opening in a door or wall that adds resistance to reduce airflow in a split
Show answer & solution

Answer: (D) An adjustable opening in a door or wall that adds resistance to reduce airflow in a split

Regulators balance airflow between splits.

Question 18

What is a stopping in mine ventilation?

  1. A gas sensor
  2. A door used for haulage
  3. A permanent wall that blocks airflow through an unused connection
  4. A fan
Show answer & solution

Answer: (C) A permanent wall that blocks airflow through an unused connection

Stoppings separate intake and return airways.

Question 19

What is an air crossing (overcast)?

  1. A structure that lets one airway pass over another without the air mixing
  2. A regulator
  3. A door
  4. A fan
Show answer & solution

Answer: (A) A structure that lets one airway pass over another without the air mixing

Air crossings are used where intake and return airways cross.

Question 20

What is a booster fan?

  1. A fan for cooling motors only
  2. An auxiliary fan for a single heading
  3. An underground fan installed in series with the main fan to boost airflow in a district
  4. A spare surface fan
Show answer & solution

Answer: (C) An underground fan installed in series with the main fan to boost airflow in a district

Booster fans must be carefully planned to avoid recirculation.

Question 21

What is recirculation in mine ventilation?

  1. Return air re-entering the intake air of the same district
  2. Air leaving the upcast
  3. Air passing through regulators
  4. Fresh air entering from the surface
Show answer & solution

Answer: (A) Return air re-entering the intake air of the same district

Uncontrolled recirculation can build up gas and dust.

Question 22

What is ventilation leakage?

  1. Air through regulators
  2. Air passing through fans
  3. Air entering from the surface
  4. Air flowing from intake to return without passing through the working places
Show answer & solution

Answer: (D) Air flowing from intake to return without passing through the working places

Leakage through stoppings and doors wastes fan power.

Question 23

What is brattice cloth used for?

  1. Explosive storage
  2. Temporary partitions to direct air to the working face
  3. Roof support
  4. Dust masks
Show answer & solution

Answer: (B) Temporary partitions to direct air to the working face

Brattice divides a roadway into intake and return sides.

Question 24

What is the main advantage of splitting the air into several districts?

  1. Less total air is needed in all cases
  2. No fans are needed
  3. It increases leakage
  4. Each district gets fresh air, and contaminants from one district do not pass to another
Show answer & solution

Answer: (D) Each district gets fresh air, and contaminants from one district do not pass to another

Splitting also reduces mine resistance.

Question 25

Which instrument commonly measures air velocity in mine airways?

  1. Hygrometer
  2. Barometer
  3. Vane anemometer
  4. Methanometer
Show answer & solution

Answer: (C) Vane anemometer

The anemometer is traversed across the airway to get mean velocity.

Question 26

How is very low air velocity measured underground?

  1. By timing a cloud of smoke from a smoke tube over a known distance
  2. By a barometer
  3. By a methanometer
  4. By a vane anemometer only
Show answer & solution

Answer: (A) By timing a cloud of smoke from a smoke tube over a known distance

Smoke tubes also show air direction.

Question 27

How is air quantity calculated from velocity in an airway?

  1. Q = velocity ÷ area
  2. Q = mean velocity × cross-sectional area
  3. Q = velocity × length
  4. Q = area ÷ velocity
Show answer & solution

Answer: (B) Q = mean velocity × cross-sectional area

For example, 2 m/s × 12 m² = 24 m³/s.

Question 28

What is the air quantity in an airway of 12 m² cross-section with a mean air velocity of 2 m/s?

  1. 6 m³/s
  2. 14 m³/s
  3. 24 m³/s
  4. 48 m³/s
Show answer & solution

Answer: (C) 24 m³/s

Q = 2 × 12 = 24 m³/s.

Question 29

What is a ventilation survey?

  1. Measurement of airflow, pressure and air quality throughout the mine
  2. A blasting survey
  3. A wages survey
  4. A geological survey
Show answer & solution

Answer: (A) Measurement of airflow, pressure and air quality throughout the mine

Pressure–quantity surveys are used to calibrate network models.

Question 30

What is ventilation on demand?

  1. Running fans at full speed always
  2. Adjusting airflow to areas according to the equipment and people present
  3. Stopping fans at night
  4. Using natural ventilation only
Show answer & solution

Answer: (B) Adjusting airflow to areas according to the equipment and people present

It saves energy in large mechanised mines.

Question 31

What is controlled recirculation?

  1. Uncontrolled leakage
  2. Natural ventilation
  3. Air flow through stoppings
  4. Deliberately recirculating a planned portion of air with continuous monitoring
Show answer & solution

Answer: (D) Deliberately recirculating a planned portion of air with continuous monitoring

It is allowed only under strict monitoring and approval.

Question 32

What is a district in mine ventilation?

  1. A surface building
  2. A pumping station
  3. A section of the mine ventilated by its own split of air
  4. A ventilation fan only
Show answer & solution

Answer: (C) A section of the mine ventilated by its own split of air

Each district has its own intake and return airways.

Question 33

Why should intake and return airways be kept well separated?

  1. To reduce air quantity at faces
  2. To mix gases
  3. To increase leakage
  4. To prevent leakage and short-circuiting of air
Show answer & solution

Answer: (D) To prevent leakage and short-circuiting of air

Good separation delivers fresh air to the faces efficiently.

Question 34

What is the purpose of an air measuring station in a main airway?

  1. To store explosives
  2. To house the fan
  3. To provide a fixed, regular section for repeated airflow measurements
  4. To charge batteries
Show answer & solution

Answer: (C) To provide a fixed, regular section for repeated airflow measurements

Measuring stations give accurate and comparable readings.

Question 35

Why must auxiliary ventilation ducts be kept close to the face?

  1. To save duct length
  2. So that fresh air reaches the face and clears gas and fumes
  3. To heat the face
  4. To increase dust
Show answer & solution

Answer: (B) So that fresh air reaches the face and clears gas and fumes

The duct outlet must be within a specified distance of the face.

Question 36

What happens if a ventilation door is left open between intake and return?

  1. Air short-circuits and the working places beyond receive less air
  2. Methane decreases at the faces
  3. Nothing changes
  4. Airflow at the face increases
Show answer & solution

Answer: (A) Air short-circuits and the working places beyond receive less air

Doors must be self-closing and kept shut.

Question 37

What is a bleeder system in longwall coal mines?

  1. A system for draining water
  2. A first aid system
  3. A blasting circuit
  4. Airways that ventilate the goaf edge to carry methane away from the workings
Show answer & solution

Answer: (D) Airways that ventilate the goaf edge to carry methane away from the workings

Bleeders help prevent methane build-up near the face.

Practice these 37 questions interactively →