What is autocompression in deep mines?
Show answer & solution
Answer: (B) Heating of air as it descends a shaft because of increasing pressure
Air gains about 1 °C per 100 m of descent in a dry shaft.
Mining Engineering · Mine Ventilation & Environment
36 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is autocompression in deep mines?
Answer: (B) Heating of air as it descends a shaft because of increasing pressure
Air gains about 1 °C per 100 m of descent in a dry shaft.
By about how much does dry air temperature rise per 100 m of descent due to autocompression?
Answer: (B) About 1 °C
The dry adiabatic lapse rate is about 9.8 °C per km.
What is the typical geothermal gradient in the earth's crust?
Answer: (C) About 1 °C per 30 to 40 m of depth
The gradient varies with local geology.
What is virgin rock temperature?
Answer: (A) The natural temperature of rock before it is cooled by ventilation
It is the main source of strata heat in deep mines.
Which of these is a major source of heat in mechanised underground mines?
Answer: (D) Diesel and electric equipment
Machines turn nearly all their power into heat.
About how much heat does a diesel engine add to mine air compared with its rated output power?
Answer: (D) About three times its rated output
Diesel engines are only about one-third efficient.
Which temperature reading is most important for judging heat stress in humid mines?
Answer: (B) Wet bulb temperature
High wet bulb temperatures limit the body's ability to cool by sweating.
Which instrument measures both dry bulb and wet bulb temperatures?
Answer: (C) Whirling (sling) psychrometer
The difference between readings gives relative humidity.
What is relative humidity?
Answer: (A) The ratio of actual water vapour pressure to the saturation vapour pressure at the same temperature
Saturated air has 100% relative humidity.
What do the wet bulb and dry bulb readings show when air is saturated?
Answer: (D) They are equal
No evaporation can occur in saturated air.
What does the Kata thermometer measure?
Answer: (A) The cooling power of the air
It measures the time for the thermometer to cool between two marks.
What is effective temperature?
Answer: (B) An index combining temperature, humidity and air velocity to indicate thermal comfort
Effective temperature charts are used in mine heat assessment.
What is heat stroke?
Answer: (C) A dangerous condition in which body temperature rises because the body cannot lose heat
Heat stroke needs immediate first aid and medical help.
What is acclimatisation in hot mines?
Answer: (C) Gradual adjustment of workers to heat over several days
Acclimatised workers sweat more efficiently and tolerate heat better.
Which method cools air in very deep, hot mines?
Answer: (D) Refrigeration plants with bulk air coolers or chilled water
Deep gold mines in South Africa rely on large refrigeration systems.
What is the main reason why heat problems are greater in deep mines?
Answer: (B) Higher rock temperature and autocompression
Both strata heat and autocompression rise with depth.
What is the dew point of air?
Answer: (A) The temperature at which water vapour begins to condense
Cooling air below its dew point causes condensation.
How does the body mainly lose heat in hot, humid mine conditions?
Answer: (C) By evaporation of sweat
High humidity reduces sweat evaporation and cooling.
Why does increasing air velocity improve working conditions in hot mines?
Answer: (B) It increases convective and evaporative cooling of the body
Air movement improves cooling until air temperature exceeds skin temperature.
What is air cooling power?
Answer: (A) The rate at which air can remove heat from a standard human body, in W/m²
It combines temperature, humidity, velocity and radiant heat.
Why may intake air be heated in very cold climates?
Answer: (D) To prevent icing of shafts and equipment
Ice in shafts can damage equipment and fall dangerously.
What effect does hot water flowing in drains or from boreholes have on mine air?
Answer: (A) It adds heat and humidity
Covering drains and piping water reduces heat load.
How does oxidation of coal or sulphide ore affect mine climate?
Answer: (B) It produces heat and may lead to spontaneous combustion
Oxidation is a slow chemical heat source.
What is the main purpose of an air conditioning study in a deep mine?
Answer: (D) To estimate heat loads and design ventilation and cooling to keep safe working conditions
Climate modelling predicts temperatures at working places.
Which work practice reduces heat stress in hot working places?
Answer: (C) Work–rest cycles and drinking enough water
Hydration and rest breaks are basic heat stress controls.
What is spot cooling in mines?
Answer: (D) Cooling air locally at working places with small coolers
Spot coolers are used where heat is concentrated.
Why does the surface temperature in summer affect underground climate in shallow mines of Pakistan such as those in Balochistan?
Answer: (D) Hot intake air carries surface heat into the workings
Intake air temperature directly affects conditions in shallow mines.
What is the effect of evaporation of water in mine airways on air temperature and humidity?
Answer: (A) It lowers dry bulb temperature but raises humidity
Evaporation converts sensible heat into latent heat.
What is sensible heat?
Answer: (B) Heat that changes the dry bulb temperature of air
Latent heat changes humidity without changing dry bulb temperature.
What is latent heat in mine air?
Answer: (B) Heat carried by water vapour as a result of evaporation
Latent heat is released again when vapour condenses.
What is a psychrometric chart used for?
Answer: (A) Finding air properties such as humidity, enthalpy and dew point from temperatures
It is a basic tool for mine climate calculations.
Why are refrigeration plants for very deep mines often placed on the surface?
Answer: (C) Heat can be rejected easily to the atmosphere
Chilled water is then sent underground to coolers.
What is the main purpose of insulating chilled water pipes underground?
Answer: (D) To reduce heat gain before the water reaches the coolers
Insulation keeps the cooling capacity for working places.
How does wet rock surface in a roadway affect the mine climate?
Answer: (A) It raises humidity and wet bulb temperature
Evaporation from wet surfaces adds latent heat.
What is the reject heat of a refrigeration plant?
Answer: (B) The heat removed from the mine plus the compressor work, discharged by condensers
Cooling towers dissipate reject heat to the atmosphere.
Which personal protective approach is used for workers in extremely hot areas such as mine rescue in fires?
Answer: (D) Cooling vests or jackets
Cooling garments extend safe working time in heat.