Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Mine Ventilation & Environment: Mine Fans

Mining Engineering · Mine Ventilation & Environment

38 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Which two main types of fan are used in mine ventilation?

  1. Ceiling and table fans
  2. Turbines and compressors only
  3. Centrifugal and axial flow fans
  4. Reciprocating and rotary pumps
Show answer & solution

Answer: (C) Centrifugal and axial flow fans

Both types are used as main and auxiliary fans.

Question 2

In an axial flow fan, in which direction does the air flow?

  1. Radially outward
  2. Downward through the motor
  3. Tangentially only
  4. Parallel to the fan shaft
Show answer & solution

Answer: (D) Parallel to the fan shaft

Axial fans are compact and suit high quantities.

Question 3

In a centrifugal fan, in which direction does the air leave the impeller?

  1. Radially outward
  2. Parallel to the shaft
  3. Back into the inlet
  4. Downward
Show answer & solution

Answer: (A) Radially outward

Air enters axially and is thrown outward by the impeller.

Question 4

What does a fan characteristic curve show?

  1. Gas content against time
  2. Fan pressure, power and efficiency against air quantity
  3. Rock strength against depth
  4. Fan cost against time
Show answer & solution

Answer: (B) Fan pressure, power and efficiency against air quantity

Manufacturers supply curves for each fan speed and blade setting.

Question 5

What determines the operating point of a mine fan?

  1. The motor voltage only
  2. The intersection of the fan characteristic curve and the mine resistance curve
  3. The fan's colour
  4. The depth of the mine only
Show answer & solution

Answer: (B) The intersection of the fan characteristic curve and the mine resistance curve

The fan delivers the quantity at which its pressure equals the mine pressure loss.

Question 6

According to the fan laws, how does air quantity vary with fan speed?

  1. With the square of speed
  2. With the cube of speed
  3. Inversely with speed
  4. Directly with speed
Show answer & solution

Answer: (D) Directly with speed

Q ∝ N for a given fan and air density.

Question 7

According to the fan laws, how does fan pressure vary with fan speed?

  1. With the square of speed
  2. Directly with speed
  3. Inversely with speed
  4. With the cube of speed
Show answer & solution

Answer: (A) With the square of speed

P ∝ N².

Question 8

According to the fan laws, how does fan power vary with fan speed?

  1. Directly with speed
  2. With the square of speed
  3. With the cube of speed
  4. Inversely with speed
Show answer & solution

Answer: (C) With the cube of speed

Power ∝ N³, so a small speed increase needs much more power.

Question 9

If the speed of a mine fan is doubled, by what factor does its power increase?

  1. 2
  2. 4
  3. 8
  4. 16
Show answer & solution

Answer: (C) 8

Power ∝ N³; 2³ = 8.

Question 10

If fan speed increases by 10%, by about what percentage does the air quantity increase?

  1. 5%
  2. 10%
  3. 21%
  4. 33%
Show answer & solution

Answer: (B) 10%

Quantity varies directly with speed.

Question 11

How is air power of a fan calculated?

  1. Air quantity ÷ speed
  2. Fan pressure ÷ air quantity
  3. Motor voltage × current only
  4. Fan pressure × air quantity
Show answer & solution

Answer: (D) Fan pressure × air quantity

Air power (W) = P (Pa) × Q (m³/s).

Question 12

How is fan efficiency defined?

  1. Air power output divided by shaft power input
  2. Pressure divided by quantity
  3. Quantity divided by speed
  4. Shaft power divided by air power
Show answer & solution

Answer: (A) Air power output divided by shaft power input

Modern fans reach efficiencies of 80–90%.

Question 13

What is the air power of a fan delivering 50 m³/s at a pressure of 2,000 Pa?

  1. 25 kW
  2. 40 kW
  3. 100 kW
  4. 1,000 kW
Show answer & solution

Answer: (C) 100 kW

50 × 2000 = 100,000 W = 100 kW.

Question 14

What happens to pressure and quantity when two identical fans operate in series?

  1. Neither changes
  2. Pressures add at the same quantity
  3. Quantities add at the same pressure
  4. Both halve
Show answer & solution

Answer: (B) Pressures add at the same quantity

Series fans suit high-resistance mines.

Question 15

What happens when two identical fans operate in parallel?

  1. Both double exactly
  2. Both halve
  3. Pressures add at the same quantity
  4. Quantities add at the same pressure
Show answer & solution

Answer: (D) Quantities add at the same pressure

Parallel fans suit low-resistance mines needing large airflow.

Question 16

What is stall in an axial flow fan?

  1. Unstable operation when air separates from the blades at high resistance
  2. Fan stopping because of power failure
  3. Fan running at design point
  4. Fan running backwards
Show answer & solution

Answer: (A) Unstable operation when air separates from the blades at high resistance

Fans must operate away from the stall region of the curve.

Question 17

How is the duty of a modern axial main fan commonly adjusted without changing speed?

  1. By changing the motor colour
  2. By adding water
  3. By changing the blade pitch angle
  4. By painting the blades
Show answer & solution

Answer: (C) By changing the blade pitch angle

Adjustable or variable-pitch blades change pressure and quantity.

Question 18

Which centrifugal fan blade shape is most efficient and has a non-overloading power characteristic?

  1. Radial blades
  2. Backward-curved (backward-inclined) blades
  3. Flat paddle blades
  4. Forward-curved blades
Show answer & solution

Answer: (B) Backward-curved (backward-inclined) blades

Backward-curved fans are widely used as main fans.

Question 19

What is the function of an evasé on a main fan outlet?

  1. To recover velocity pressure by gradually slowing the air
  2. To heat the air
  3. To filter dust
  4. To reverse the fan
Show answer & solution

Answer: (A) To recover velocity pressure by gradually slowing the air

The diverging outlet converts kinetic energy to static pressure.

Question 20

What is the purpose of explosion doors on a main fan drift?

  1. To let people in
  2. To control water
  3. To store tools
  4. To relieve the pressure of a mine explosion and protect the fan
Show answer & solution

Answer: (D) To relieve the pressure of a mine explosion and protect the fan

The doors blow open and then close to restore ventilation.

Question 21

Why must main fans be able to reverse airflow?

  1. To clean the blades
  2. To control smoke and fumes during some mine fires and emergencies
  3. To increase production
  4. To reduce noise
Show answer & solution

Answer: (B) To control smoke and fumes during some mine fires and emergencies

Reversal must follow an approved emergency plan.

Question 22

Why is an automatic alarm fitted to main mine fans?

  1. To start the conveyor
  2. To record rainfall
  3. To measure wages
  4. To warn immediately if the fan stops or its pressure falls
Show answer & solution

Answer: (D) To warn immediately if the fan stops or its pressure falls

Fan stoppage requires withdrawal of workers under regulations.

Question 23

What is fan static pressure?

  1. Fan total pressure minus velocity pressure at the outlet
  2. Pressure in the motor
  3. Velocity pressure only
  4. Atmospheric pressure
Show answer & solution

Answer: (A) Fan total pressure minus velocity pressure at the outlet

Static pressure overcomes mine resistance.

Question 24

What is fan total pressure?

  1. Static pressure only
  2. Velocity pressure only
  3. The sum of fan static pressure and velocity pressure
  4. Atmospheric pressure plus static pressure
Show answer & solution

Answer: (C) The sum of fan static pressure and velocity pressure

Total pressure is the total energy given to the air by the fan.

Question 25

What is the main advantage of variable speed drives on mine fans?

  1. They make fans heavier
  2. They need no electricity
  3. They stop fans completely
  4. Airflow can be matched to demand, saving energy
Show answer & solution

Answer: (D) Airflow can be matched to demand, saving energy

Power falls with the cube of speed.

Question 26

Why are main fans usually installed on the surface rather than underground?

  1. They are safe from underground fires and explosions and easy to maintain
  2. They are cheaper underground
  3. Regulations forbid surface fans
  4. They work better in dust
Show answer & solution

Answer: (A) They are safe from underground fires and explosions and easy to maintain

Surface fans can be inspected and repaired easily.

Question 27

Why is a standby main fan often installed?

  1. To reduce noise
  2. To double airflow permanently
  3. To keep the mine ventilated if the working fan fails
  4. To heat the mine
Show answer & solution

Answer: (C) To keep the mine ventilated if the working fan fails

Continuity of ventilation is critical for safety.

Question 28

How does fan diameter affect air quantity for geometrically similar fans at the same speed?

  1. Quantity varies with the square of diameter
  2. Quantity varies with the cube of diameter
  3. Diameter has no effect
  4. Quantity varies with diameter
Show answer & solution

Answer: (B) Quantity varies with the cube of diameter

Q ∝ D³ at constant speed.

Question 29

How does fan diameter affect fan pressure for similar fans at the same speed?

  1. Pressure varies with the cube of diameter
  2. Pressure varies directly with diameter
  3. Diameter has no effect
  4. Pressure varies with the square of diameter
Show answer & solution

Answer: (D) Pressure varies with the square of diameter

P ∝ D² at constant speed and density.

Question 30

What is an auxiliary fan?

  1. A fan to cool motors
  2. A small fan with ducting to ventilate a blind heading
  3. A fan for the lamp room
  4. The main surface fan
Show answer & solution

Answer: (B) A small fan with ducting to ventilate a blind heading

Auxiliary fans must be placed in the fresh air stream.

Question 31

Where must an auxiliary fan be located to avoid recirculation?

  1. At the face
  2. Inside the blind heading
  3. In the intake air, a sufficient distance outby the heading entrance
  4. In the return airway beyond the heading
Show answer & solution

Answer: (C) In the intake air, a sufficient distance outby the heading entrance

Placing the fan in the return would recirculate contaminated air.

Question 32

Which type of fan is commonly used with flexible ducting for auxiliary ventilation?

  1. Axial flow fan
  2. Vacuum pump
  3. Large centrifugal main fan
  4. Ceiling fan
Show answer & solution

Answer: (A) Axial flow fan

Axial fans fit in line with the duct.

Question 33

How does air density affect fan pressure at a fixed speed and quantity?

  1. Pressure varies with the cube of density
  2. Density has no effect
  3. Pressure varies directly with air density
  4. Pressure varies inversely with density
Show answer & solution

Answer: (C) Pressure varies directly with air density

Fans develop less pressure in thin, hot air.

Question 34

What is the fan law relationship for power and diameter of similar fans at the same speed?

  1. Power varies with the fifth power of diameter
  2. Power varies with diameter
  3. Power varies with the square of diameter
  4. Power is unaffected by diameter
Show answer & solution

Answer: (A) Power varies with the fifth power of diameter

Power ∝ D⁵ at constant speed and density.

Question 35

What is the mine fan surge or hunting problem?

  1. A broken belt drive
  2. Steady flow at the design point
  3. A fan running backward
  4. Unstable fluctuating flow when a fan works near its stall region
Show answer & solution

Answer: (D) Unstable fluctuating flow when a fan works near its stall region

Selecting the correct blade angle avoids unstable operation.

Question 36

What is the main disadvantage of forward-curved centrifugal fans as main mine fans?

  1. Their power rises steeply with quantity and they can overload the motor
  2. They are too efficient
  3. They make no noise
  4. They cannot be reversed
Show answer & solution

Answer: (A) Their power rises steeply with quantity and they can overload the motor

Backward-curved fans are preferred for main ventilation.

Question 37

How is a mine fan's performance checked after installation?

  1. By listening only
  2. By measuring its pressure, airflow and power to find the actual operating point
  3. By counting blades
  4. By measuring its colour
Show answer & solution

Answer: (B) By measuring its pressure, airflow and power to find the actual operating point

Fan tests confirm efficiency and duty.

Question 38

Why must flexible ventilation ducting be kept free of holes and kinks?

  1. They increase airflow
  2. They improve dust control
  3. They have no effect
  4. Leaks and bends reduce the air reaching the face
Show answer & solution

Answer: (D) Leaks and bends reduce the air reaching the face

Duct leakage can waste a large share of fan output.

Practice these 38 questions interactively →