What is Atkinson's equation for pressure loss in an airway?
Show answer & solution
Answer: (D) P = KCLV²/A
K is the friction factor, C perimeter, L length, V velocity and A area.
Mining Engineering · Mine Ventilation & Environment
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is Atkinson's equation for pressure loss in an airway?
Answer: (D) P = KCLV²/A
K is the friction factor, C perimeter, L length, V velocity and A area.
How is airway resistance R related to pressure and quantity?
Answer: (B) P = RQ²
This is the square law of mine ventilation.
How is airway resistance R defined in terms of airway dimensions?
Answer: (B) R = KCL/A³
Resistance falls rapidly as cross-sectional area increases.
What happens to the pressure drop in an airway if the air quantity is doubled?
Answer: (A) It increases four times
P = RQ²; doubling Q gives 2² = 4 times P.
In which SI unit is airway resistance expressed?
Answer: (D) N·s²/m⁸
N·s²/m⁸ is also called the gaul.
What is the friction factor K in Atkinson's equation?
Answer: (C) A coefficient depending on airway roughness, in kg/m³
Smooth concrete airways have lower K than rough, timbered ones.
How is the total resistance of airways in series calculated?
Answer: (B) R = R1 + R2 + R3 + …
Series resistances simply add.
How is the equivalent resistance of airways in parallel calculated?
Answer: (D) 1/√R = 1/√R1 + 1/√R2 + …
The square law gives this rule for parallel splits.
What is the equivalent resistance of two equal airways of resistance R in parallel?
Answer: (A) R/4
1/√Re = 2/√R gives Re = R/4.
What is the pressure drop in an airway of resistance 0.5 N·s²/m⁸ carrying 20 m³/s?
Answer: (C) 200 Pa
P = 0.5 × 20² = 200 Pa.
What are shock losses in mine ventilation?
Answer: (C) Pressure losses caused by bends, junctions, changes in area and obstructions
Shock losses are often expressed as an equivalent length of airway.
Which iterative method is commonly used to solve mine ventilation networks?
Answer: (A) Hardy Cross method
Computer programs use Hardy Cross or similar iterative methods.
What does Kirchhoff's first law state for a ventilation network?
Answer: (B) The sum of airflows at a junction is zero
Air entering a junction equals air leaving it.
What does Kirchhoff's second law state for a ventilation network?
Answer: (D) The algebraic sum of pressure drops around a closed loop is zero, allowing for fans and natural ventilation
It is the pressure balance used in network analysis.
What shape is the mine resistance (characteristic) curve on a pressure–quantity graph?
Answer: (C) A parabola through the origin
The curve follows P = RQ².
How does increasing the cross-sectional area of an airway affect its resistance?
Answer: (A) Resistance decreases greatly, roughly with the cube of area
Larger airways greatly reduce fan power for the same airflow.
How many pascals equal a pressure of 1 mm of water gauge?
Answer: (C) About 9.81 Pa
1 mm w.g. = 9.81 Pa.
What is velocity pressure in an airway?
Answer: (D) ½ρV², the kinetic energy of the air per unit volume
Velocity pressure is measured with a pitot-static tube.
What is the velocity pressure of air with a density of 1.2 kg/m³ moving at 10 m/s?
Answer: (C) 60 Pa
½ × 1.2 × 10² = 60 Pa.
What is the standard density of air used in ventilation calculations?
Answer: (C) 1.2 kg/m³
Actual density varies with pressure, temperature and humidity.
Which instrument measures velocity pressure when connected to a manometer?
Answer: (B) Pitot-static tube
The pitot tube senses total and static pressure.
How is natural ventilation pressure (NVP) calculated for a mine with shafts of depth H?
Answer: (D) NVP = gH(ρd − ρu), where ρd and ρu are mean air densities in the downcast and upcast
NVP depends on the density difference between the shafts.
Why is natural ventilation pressure often higher in winter in mines with cold surface air?
Answer: (A) The density difference between cold downcast air and warm upcast air is larger
NVP can assist or oppose the fan depending on season.
What is the air power needed to move 20 m³/s through an airway with a pressure drop of 200 Pa?
Answer: (B) 4 kW
200 × 20 = 4,000 W.
Why is a minimum air velocity specified in working places?
Answer: (B) To dilute and remove gas and dust and prevent methane layering
Too low velocity lets contaminants accumulate.
Why is a maximum air velocity specified in airways and working places?
Answer: (A) To limit dust raising, discomfort and pressure losses
Very high velocities lift dust and waste energy.
Which computer software is commonly used to model mine ventilation networks?
Answer: (D) Network simulation programs such as Ventsim
These programs solve the network for flows and pressures.
How is the resistance of a mine airway usually found in the field?
Answer: (D) By measuring the pressure drop and air quantity and using R = P/Q²
Pressure surveys give resistances for each branch.
What is the effect of placing an obstruction such as a parked vehicle in an airway?
Answer: (A) It adds shock loss and increases resistance
Obstructions reduce the effective area of the airway.
What happens to the fan power required if the mine resistance doubles at the same air quantity?
Answer: (B) It doubles
Power = RQ³; at constant Q power is proportional to R.
What is the cube law of mine ventilation?
Answer: (D) Power required is proportional to the cube of air quantity for a given resistance
Power = PQ = RQ³.
By how much does fan power increase if air quantity is increased by 50% in the same mine?
Answer: (C) About 3.4 times
1.5³ ≈ 3.4.
What is the purpose of smoothing or concrete-lining main airways?
Answer: (A) To reduce the friction factor and airway resistance
Lower K reduces pressure loss and fan power.
What is the effect of making an airway twice as long, with other factors unchanged?
Answer: (A) Its resistance doubles
R is proportional to airway length.
What does a ventilation pressure survey measure?
Answer: (C) Pressure drops between stations along the main airways
Combined with airflows, it gives the resistance of each branch.
Which instrument is used for pressure surveys using barometric readings?
Answer: (B) Precision barometer (altimeter)
Barometric surveys correct readings for elevation and air density.
Which survey method measures pressure differences directly by running a long tube between stations?
Answer: (B) Gauge and tube method
A manometer connected by tubing gives the frictional pressure drop.
What is the equivalent orifice of a mine?
Answer: (C) An imaginary opening that would pass the same air quantity at the same pressure as the mine
It is a simple measure of how easy a mine is to ventilate.