Which shaft conveyance carries ore and dumps it automatically at the surface?
Show answer & solution
Answer: (D) Skip
Skips are loaded at the shaft bottom and discharge into surface bins.
Mining Engineering · Underground Mining Methods
37 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which shaft conveyance carries ore and dumps it automatically at the surface?
Answer: (D) Skip
Skips are loaded at the shaft bottom and discharge into surface bins.
Which shaft conveyance carries people, materials and equipment?
Answer: (A) Cage
Cages have decks and gates for safe transport.
What is a kibble?
Answer: (A) A large bucket used to hoist rock and men during shaft sinking
Kibbles hang freely on the rope during sinking.
Which hoist winds the rope onto and off a drum?
Answer: (B) Drum winder
Drum winders may be single drum, double drum or Blair multi-rope.
Which hoist drives the ropes by friction over a wheel instead of storing them on a drum?
Answer: (D) Koepe (friction) winder
Koepe winders are often mounted in tower headframes.
What is the main advantage of a Koepe (friction) winder?
Answer: (C) A smaller drive and several ropes for heavy loads in deep shafts
Multiple ropes share the load and reduce rope size.
What is the purpose of the tail rope in a Koepe winder?
Answer: (B) To balance the weight of the hoisting ropes
Tail ropes hang below the conveyances and keep the system balanced.
For which shafts is the Blair multi-rope drum hoist mainly used?
Answer: (A) Very deep shafts
Two ropes share the load, allowing great depths.
What is an overwind in mine hoisting?
Answer: (D) A conveyance travelling beyond its normal stopping position
Overwinds can crash conveyances into the headframe.
What protects against overwind in mine hoisting?
Answer: (C) Overwind limit switches and arresting devices
Regulations require automatic overwind protection on winders.
What are safety catches on a cage?
Answer: (D) Devices that grip the guides if the rope breaks
Safety catches stop a falling cage.
Which rope construction resists rotation in single-rope hoisting?
Answer: (A) Non-rotating (multi-strand) rope
Inner and outer strands laid in opposite directions balance torque.
What is Lang's lay in wire ropes?
Answer: (C) Wires and strands laid in the same direction
Lang's lay gives better wear resistance but tends to untwist.
What is ordinary (regular) lay in wire ropes?
Answer: (B) Wires laid in the opposite direction to the strands
Ordinary lay is more stable and less likely to untwist.
What is the purpose of shaft guides?
Answer: (C) To keep the conveyance aligned as it travels in the shaft
Guides may be steel rails, timber or ropes.
Which haulage system uses rails with battery or trolley-wire locomotives?
Answer: (D) Rail (track) haulage
Rail haulage is efficient for long, flat main levels.
Why are ordinary diesel locomotives restricted in underground coal mines?
Answer: (A) Their exhaust and hot surfaces can ignite methane, so only approved flameproof types are allowed
Diesel equipment in gassy mines must be specially approved.
What is the main use of belt conveyors in underground coal mines?
Answer: (B) Continuous haulage of coal from the face to the shaft or surface
Belts carry large tonnages with low labour.
What is rope haulage?
Answer: (D) Mine tubs hauled by a wire rope driven by a stationary engine
Rope haulage is common on inclines.
What is endless rope haulage?
Answer: (B) A continuous rope loop moving in one direction with tubs clipped on
Tubs are attached to the moving rope and detached at stations.
What does LHD stand for in underground mining?
Answer: (C) Load-haul-dump
LHDs are the main loading machines in trackless metal mines.
What is trackless mining?
Answer: (A) Mining with rubber-tyred mobile equipment instead of rail systems
Trackless equipment includes jumbos, LHDs, trucks and bolters.
What is a scraper (slusher) in underground stopes?
Answer: (D) A bucket pulled by a winch to drag broken ore to an ore pass
Scrapers are used in narrow, flat stopes.
What is a chute at the bottom of an ore pass?
Answer: (B) A gate that controls the flow of ore into cars or conveyors
Chutes regulate loading from ore passes.
How is coal commonly transported up the inclined drifts of small coal mines in Balochistan?
Answer: (A) In tubs (trolleys) hauled by winches on rails
Small inclined mines commonly use winches with tubs on narrow-gauge track.
What is man-riding in mines?
Answer: (C) Transporting people in approved conveyances
Man-riding must use approved cars, cages or chairlifts.
What is the loading pocket at a shaft bottom?
Answer: (B) A bin from which a measured load of ore is fed into the skip
Measuring flasks ensure skips are loaded correctly.
Why is ore often crushed underground before skip hoisting?
Answer: (D) To reduce rock size for skips, chutes and conveyors
Underground jaw crushers prevent blockages in loading pockets.
Why are standard signal codes used in mine shafts?
Answer: (C) To prevent misunderstanding between the onsetter, banksman and winding engineman
Standard signals are required by mine regulations.
Which safety device stops a belt conveyor if the belt runs off its line?
Answer: (A) Belt sway (misalignment) switch
Sway switches prevent damage and fires from belt rubbing.
Why is fire-resistant belting required in underground coal mines?
Answer: (D) To prevent conveyor belt fires
Belt fires produce toxic smoke and have caused major disasters.
What is a pull-cord along a conveyor?
Answer: (A) An emergency stop switch that can be operated anywhere along the belt
Pull-cords allow anyone to stop the belt quickly.
What is the advantage of battery locomotives in gassy mines?
Answer: (B) They produce no exhaust and can be made flameproof
Battery locomotives are used where trolley wires are unsafe.
Who operates the winding engine of a mine shaft?
Answer: (C) Winding engineman
The banksman works at the surface landing and the onsetter at underground stations.
Why must a mine winder have at least two independent brakes?
Answer: (B) So that one can stop and hold the load if the other fails
Brake redundancy is a basic winding safety requirement.
What is the function of a skip loading station's measuring flask?
Answer: (C) To deliver a fixed, measured load into each skip
Accurate skip loads prevent overloading and spillage.
Which conveyance carries men in an inclined shaft or drift on rails?
Answer: (C) Man-riding car
Man-riding cars must have safety brakes and approved couplings.