What is a theodolite?
Show answer & solution
Answer: (D) An instrument for measuring horizontal and vertical angles
The theodolite is the basic instrument for traversing and setting out.
Mining Engineering · Mine Surveying
35 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a theodolite?
Answer: (D) An instrument for measuring horizontal and vertical angles
The theodolite is the basic instrument for traversing and setting out.
What is a transit theodolite?
Answer: (C) A theodolite whose telescope can be rotated through 180° in the vertical plane
Transiting allows face left and face right observations.
Why are angles observed on both face left and face right of a theodolite?
Answer: (A) To eliminate instrumental errors such as collimation and trunnion axis errors
The mean of both faces cancels most instrumental errors.
What is a traverse in surveying?
Answer: (D) A series of connected survey lines whose lengths and directions are measured
Traverses are the main control method underground.
What is a closed traverse?
Answer: (C) A traverse that returns to its starting point or ends on another point of known position
Closed traverses can be checked for misclosure.
Why are underground traverses often open, and how are they checked?
Answer: (B) Roadways may not form loops, so they are checked by repeating the traverse or by gyro azimuths
Open traverses have no built-in check, so independent checks are essential.
What is the sum of the interior angles of a closed traverse with n sides?
Answer: (A) (2n − 4) × 90°
For a triangle this gives 180°.
What is the sum of the interior angles of a closed six-sided traverse?
Answer: (B) 720°
(2 × 6 − 4) × 90° = 720°.
How is the latitude of a survey line of length L and bearing θ calculated?
Answer: (D) L cos θ
Latitude is the north–south component of the line.
How is the departure of a survey line of length L and bearing θ calculated?
Answer: (A) L sin θ
Departure is the east–west component of the line.
What is the linear misclosure of a closed traverse?
Answer: (C) √(ΣL² + ΣD²), where ΣL and ΣD are the sums of latitudes and departures
In a perfect closed traverse both sums are zero.
Which rule distributes traverse misclosure in proportion to line lengths, assuming angles and distances are equally precise?
Answer: (D) Bowditch (compass) rule
Bowditch's rule is the most common traverse adjustment.
When is the transit rule preferred for traverse adjustment?
Answer: (C) When angles are measured more precisely than distances
The transit rule distributes errors in proportion to latitudes and departures.
How is the relative precision of a traverse expressed?
Answer: (B) As 1 in (total traverse length divided by linear misclosure)
For example, a precision of 1 in 10,000.
What are the latitude and departure of a line 100 m long with a whole circle bearing of 60°?
Answer: (A) Latitude 50.0 m and departure 86.6 m
100 cos 60° = 50; 100 sin 60° = 86.6.
What are the latitude and departure of a line 50 m long with a whole circle bearing of 180°?
Answer: (C) Latitude −50 m and departure 0
The line runs due south.
What is the repetition method of measuring a horizontal angle?
Answer: (B) Measuring the same angle several times on the horizontal circle and dividing the total by the number of repetitions
Repetition reduces reading and graduation errors.
What is the reiteration method of measuring horizontal angles?
Answer: (A) Measuring several angles at one station in succession and closing on the starting point
It is used when many directions are observed from one station.
What is the purpose of an optical plummet on a theodolite?
Answer: (D) To centre the instrument accurately over a station mark
It is more accurate than a plumb bob, especially in wind.
What is the standard tacheometric formula for horizontal distance with a horizontal sight?
Answer: (B) D = Ks + C
K is usually 100 and C is usually zero for modern instruments.
What is the horizontal distance if the staff intercept is 1.25 m with K = 100 and C = 0?
Answer: (C) 125 m
D = 100 × 1.25 = 125 m.
What is the main advantage of traversing with a total station?
Answer: (D) Angles and distances are measured and recorded electronically with high accuracy
Data can be downloaded directly into mine planning software.
What are independent (total) coordinates?
Answer: (A) Coordinates of points referred to a common origin
They are obtained by adding consecutive coordinates from the origin.
Which method calculates the area of a closed traverse from the coordinates of its stations?
Answer: (D) Coordinate (cross-multiplication) method
Area = half the absolute value of Σ(XiYi+1 − Xi+1Yi).
What does a positive departure indicate?
Answer: (B) The line runs towards the east
Departures are positive east and negative west.
What does a positive latitude indicate?
Answer: (A) The line runs towards the north
Latitudes are positive north and negative south.
What is a deflection angle in traversing?
Answer: (C) The angle between the extension of the previous line and the next line
Deflection angles are marked right (R) or left (L).
How is angular misclosure usually distributed in a closed traverse?
Answer: (C) Equally among all measured angles
Each angle is assumed to have equal error.
What is the zenith angle?
Answer: (D) The vertical angle measured from the vertical upward direction
Zenith angle = 90° − vertical angle of elevation.
Which north is normally used as the reference direction on mine plans?
Answer: (B) Grid north or true north, not magnetic north
Magnetic north changes with time and is affected by local attraction.
Which angles are measured directly at each station of a closed traverse with a theodolite?
Answer: (A) Included (interior) angles between adjacent lines
Bearings are then calculated from a starting bearing and the included angles.
What is the main source of error when centring a theodolite with a plumb bob in windy conditions?
Answer: (D) Swinging of the plumb bob
An optical or laser plummet avoids this problem.
What is the trunnion axis of a theodolite?
Answer: (A) The horizontal axis about which the telescope rotates
The trunnion axis should be perpendicular to the vertical axis.
How many independent coordinates define the position of a point on a plan?
Answer: (B) Two (easting and northing)
Height is a third coordinate.
Which instrument error is NOT eliminated by observing on both faces of a theodolite?
Answer: (D) Error from the vertical axis not being truly vertical
Careful levelling of the instrument is needed to control vertical axis error.