What is quarrying?
Show answer & solution
Answer: (B) Surface extraction of building stone, aggregate or industrial minerals
Quarries supply stone, limestone, marble and aggregate.
Mining Engineering · Surface Mining
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is quarrying?
Answer: (B) Surface extraction of building stone, aggregate or industrial minerals
Quarries supply stone, limestone, marble and aggregate.
What is dimension stone?
Answer: (A) Natural stone cut to specific sizes and shapes such as blocks and slabs
Marble, granite and limestone blocks are typical dimension stone.
Which method cuts stone blocks using a steel wire fitted with diamond beads?
Answer: (D) Diamond wire sawing
The looped wire is pulled through the rock to cut smooth faces.
Why is heavy blasting avoided in dimension stone quarries?
Answer: (A) It cracks and damages the blocks
Fractures from blasting reduce block size and value.
Which explosive-free method splits stone blocks using a row of holes and steel wedges?
Answer: (B) Plug and feather (wedge splitting)
Wedges driven between shims split the rock along the line of holes.
Which low-strength explosive is traditionally used in marble quarries to split blocks gently?
Answer: (D) Black powder (gunpowder)
Black powder deflagrates and pushes rather than shatters.
Which non-explosive agent breaks rock by expanding inside drilled holes?
Answer: (C) Expansive (soundless) demolition agent
The slurry hydrates and expands slowly, cracking rock without noise or flyrock.
What is line drilling?
Answer: (D) Drilling a row of closely spaced unloaded holes to form a break plane
Line drilling guides the break and protects the final face.
Which district of Balochistan is famous for its onyx (green marble) quarries?
Answer: (C) Chagai
Chagai onyx is among the best-known decorative stones of Pakistan.
Which area of Khyber Pakhtunkhwa is a major centre of marble quarrying?
Answer: (A) Buner
Buner and nearby districts produce large quantities of white marble.
Which rock is the main raw material for cement manufacture?
Answer: (B) Limestone
Limestone supplies the calcium oxide needed for clinker.
Which mineral is added to cement clinker to control setting time?
Answer: (C) Gypsum
About 3–5% gypsum is ground with clinker to prevent flash setting.
What is aggregate in quarrying?
Answer: (A) Crushed stone, sand and gravel used in concrete and roads
Aggregate forms most of the volume of concrete and road bases.
Which crusher is commonly used for primary crushing of quarry rock?
Answer: (B) Jaw crusher
Jaw crushers take large run-of-quarry feed.
Which crusher is commonly used for secondary crushing of aggregate?
Answer: (D) Cone crusher
Cone crushers reduce primary-crushed rock to aggregate sizes.
Which crusher produces well-shaped cubical aggregate by rock-on-rock impact?
Answer: (C) Vertical shaft impactor (VSI)
VSIs are used for manufactured sand and cubical chips.
What is screening in quarry operations?
Answer: (A) Separating crushed material into size fractions
Vibrating screens grade aggregate by size.
What is backbreak?
Answer: (D) Breakage of rock beyond the designed bench line
Backbreak weakens the next bench crest.
What is the main environmental concern from quarry crushing plants?
Answer: (B) Dust emission
Water sprays, enclosures and bag filters control crusher dust.
Why are benches used in large aggregate quarries?
Answer: (B) To give safe, stable working faces and efficient drilling and loading
Benching avoids dangerous high single faces.
What is a hydraulic rock splitter?
Answer: (A) A tool inserted into a drilled hole that splits rock by hydraulic wedge pressure
Splitters break rock where explosives are not allowed.
Which machine with a cutter chain on a long arm is used to cut soft stone such as marble and limestone directly from the face?
Answer: (C) Stone chain saw
Chain saws cut vertical and horizontal slots to free blocks.
Which machine cuts large stone blocks into slabs in a processing plant?
Answer: (D) Gang saw (frame saw)
Gang saws use many parallel blades to cut a block into slabs at once.
What is recovery ratio in dimension stone quarrying?
Answer: (A) Ratio of saleable blocks to total rock extracted
Recovery in many dimension stone quarries is under 30%.
Why is recovery often low in dimension stone quarries?
Answer: (D) Joints, fractures and colour variations make much of the rock unsuitable for blocks
Block size depends on natural joint spacing and stone uniformity.
What is scaling of a quarry face?
Answer: (B) Removing loose rock from the face
Scaling prevents rockfalls onto workers and equipment.
Which test measures the resistance of aggregate to abrasion in a rotating drum with steel balls?
Answer: (C) Los Angeles abrasion test
The LA abrasion value is the percentage passing a 1.7 mm sieve after the test.
Which test measures the resistance of aggregate to sudden blows?
Answer: (B) Aggregate impact value test
A hammer is dropped on the sample and the fines produced are measured.
What are fines in quarrying?
Answer: (C) Very small particles produced during blasting and crushing
Excess fines reduce product value and cause dust.
What is secondary breaking in quarries?
Answer: (D) Breaking oversize boulders after the primary blast
Oversize is broken by rock breakers or small charges.
Which equipment breaks oversize boulders without explosives?
Answer: (A) Hydraulic rock breaker (hammer)
Mounted on an excavator, the breaker shatters boulders by impact.
What is oversize in quarrying?
Answer: (B) Rock too large for the crusher opening or loading bucket
Poor fragmentation produces oversize and secondary breaking cost.
What is silica sand mainly used for?
Answer: (A) Glass making and foundry moulds
High-purity quartz sand is the main glass raw material.
What does run-of-quarry material mean?
Answer: (C) Unsorted rock as it comes from the blast
Run-of-quarry rock still needs crushing and screening.
What is quarry restoration?
Answer: (D) Rehabilitating the site after quarrying for a safe after-use
Restoration may create farmland, lakes, wildlife habitat or building land.
Which property makes a stone suitable for use as dimension stone?
Answer: (A) Uniform colour and texture with few fractures
Block-sized, sound and attractive stone commands high prices.
What is a quarry face survey mainly used for?
Answer: (C) Checking face position, bench geometry and burden before drilling
Laser profiling of the face prevents excessive or insufficient front-row burden.
Which industrial rock is quarried in large quantities near Daudkhel, Rohri and Wah to feed cement plants?
Answer: (C) Limestone
Pakistan's cement plants are sited close to large limestone quarries.