What is an explosive in mining terms?
Show answer & solution
Answer: (D) A substance that undergoes a very rapid chemical reaction producing a large volume of hot gas
The sudden gas expansion and shock break and move rock.
Mining Engineering · Explosives & Blasting
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is an explosive in mining terms?
Answer: (D) A substance that undergoes a very rapid chemical reaction producing a large volume of hot gas
The sudden gas expansion and shock break and move rock.
Which explosive deflagrates (burns rapidly) rather than detonates?
Answer: (B) Black powder
Black powder is a low explosive with a reaction speed below the speed of sound.
What is detonation?
Answer: (C) A reaction front travelling through the explosive faster than the speed of sound, supported by a shock wave
Detonation velocities in commercial explosives range from about 2,000 to 7,000 m/s.
Which class of explosive is very sensitive and is used in small amounts inside detonators?
Answer: (A) Primary explosives
Primary explosives such as lead azide detonate readily from heat or flame.
Which explosive is commonly used as the base charge in detonators?
Answer: (C) PETN
The primary charge initiates the PETN base charge, which initiates the primer.
Which explosive forms the core of detonating cord?
Answer: (B) PETN
Detonating cord has a PETN core inside a plastic and textile covering.
What is ANFO?
Answer: (A) A mixture of ammonium nitrate and fuel oil
ANFO is the most widely used bulk blasting agent.
What is the approximate oxygen-balanced composition of ANFO by weight?
Answer: (C) 94% ammonium nitrate and 6% fuel oil
At about 94:6 ANFO gives maximum energy and minimum toxic fumes.
What is the main limitation of ANFO?
Answer: (D) Poor water resistance
Water dissolves ammonium nitrate and ANFO fails in wet holes.
What is a blasting agent?
Answer: (B) A fuel–oxidiser mixture that is not cap-sensitive and needs a primer to detonate
ANFO and many bulk emulsions are blasting agents.
How is ANFO normally initiated in a blast hole?
Answer: (A) With a primer or booster
ANFO is insensitive to a single detonator and needs a strong primer.
What is an emulsion explosive?
Answer: (D) A water-in-oil emulsion of oxidiser solution droplets dispersed in fuel
Emulsions are sensitised with gas bubbles or microballoons.
What is the main advantage of emulsion explosives over ANFO?
Answer: (A) Excellent water resistance and higher energy density
Emulsions can be pumped into water-filled holes.
What is heavy ANFO?
Answer: (B) A blend of emulsion and ANFO
Heavy ANFO combines higher density and some water resistance with ANFO's low cost.
What is a slurry (water gel) explosive?
Answer: (D) Oxidiser and fuel held in a thickened water gel
Water gels were developed as safer substitutes for dynamite.
On which ingredient was traditional dynamite based?
Answer: (C) Nitroglycerine absorbed in an absorbent material
Absorbing nitroglycerine made it much safer to handle.
Who invented dynamite?
Answer: (D) Alfred Nobel
Nobel patented dynamite in 1867.
What is a disadvantage of nitroglycerine-based explosives?
Answer: (B) They cause headaches and can become dangerous through exudation or freezing
NG explosives have largely been replaced by emulsions.
What is a permitted (permissible) explosive?
Answer: (A) An explosive approved for use in gassy coal mines after tests show it will not ignite methane or coal dust
Permitted explosives have a cool, short flame.
Which additive is used in permitted explosives to cool the flame?
Answer: (C) Sodium chloride (common salt)
Salt acts as a flame coolant and reduces the risk of firedamp ignition.
Why is aluminium powder added to some explosives?
Answer: (C) To increase the heat and energy released
Aluminised explosives give extra energy for hard rock.
What is a cast booster commonly made of?
Answer: (A) Pentolite (PETN and TNT)
Cast boosters give high detonation pressure for initiating blasting agents.
What is a primer in blasting?
Answer: (B) A cartridge or booster fitted with a detonator that initiates the main charge
The primer is placed in the charge column, usually near the bottom.
How are bulk explosives commonly delivered into large surface blast holes?
Answer: (D) By mobile manufacturing trucks that auger or pump the product into the holes
Bulk trucks mix and load ANFO and emulsions at the hole.
What is the main advantage of bulk loading over cartridges?
Answer: (A) The explosive fills the hole completely and loading is faster
Full coupling improves energy transfer to the rock.
Where are packaged (cartridged) explosives mainly used?
Answer: (C) In small-diameter holes, wet holes and as primers
Cartridges are convenient for underground and small quarry blasting.
What are the ingredients of black powder?
Answer: (B) Potassium nitrate, charcoal and sulphur
Black powder is used in safety fuse and for gentle splitting of stone.
Which company at Wah, Pakistan, manufactures commercial explosives and detonators?
Answer: (D) Wah Nobel
Wah Nobel supplies commercial explosives to mines and quarries in Pakistan.
Which law regulates the manufacture, possession, use and transport of explosives in Pakistan?
Answer: (A) Explosives Act, 1884
The Explosives Act 1884 and Explosives Rules govern explosives in Pakistan.
What type of ammonium nitrate is preferred for making ANFO?
Answer: (D) Porous low-density prills
Porous prills absorb fuel oil evenly.
What is the effect of too much fuel oil in ANFO?
Answer: (B) Negative oxygen balance, producing carbon monoxide
Excess fuel leaves carbon that forms CO.
What is the effect of too little fuel oil in ANFO?
Answer: (C) Positive oxygen balance, producing nitrogen oxides
Excess oxygen forms NOx, seen as orange fumes.
Which explosive charges are generally used for pre-splitting in smaller holes?
Answer: (C) Small-diameter, decoupled charges
Decoupling reduces hole pressure so only a single crack forms.
Which nitroglycerine explosive has the best water resistance?
Answer: (A) Blasting gelatine
Gelatinised explosives resist water well.
What is a secondary explosive?
Answer: (B) An explosive that is relatively insensitive and needs a detonator to initiate it
PETN, TNT and RDX are secondary explosives.
What is the main purpose of sensitising an emulsion with gas bubbles or microballoons?
Answer: (D) To provide hot spots that allow the emulsion to detonate reliably
Without sensitisers an emulsion cannot detonate.
Which type of explosive is generally the cheapest per unit of energy?
Answer: (C) ANFO
Low cost makes ANFO the most widely used explosive in dry holes.
Which explosive is typically used to make detonating cord-based pre-split charges or trunklines and is very stable in storage?
Answer: (D) PETN
PETN is a stable, powerful secondary explosive.