What is the instantaneous centre of a link?
Show answer & solution
Answer: (C) The point about which a link can be considered to rotate at a given instant
Its velocity is zero at that instant relative to the reference link.
Mechanical Engineering · Theory of Machines
29 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the instantaneous centre of a link?
Answer: (C) The point about which a link can be considered to rotate at a given instant
Its velocity is zero at that instant relative to the reference link.
How many instantaneous centres does a mechanism with n links have?
Answer: (D) n(n − 1)/2
A four-bar mechanism has six instantaneous centres.
How many links and instantaneous centres does a reciprocating engine (slider crank) mechanism have?
Answer: (B) 4 links and 6 instantaneous centres
6 = 4 × 3 ÷ 2.
What does Kennedy's (three-centres-in-line) theorem state?
Answer: (A) The three instantaneous centres of three bodies in plane motion relative to each other lie on a straight line
It is used to locate secondary instantaneous centres.
In which direction is the velocity of point A relative to point O on a rigid link OA?
Answer: (A) Perpendicular to OA
A rigid link cannot change length.
What does a line joining two points on a velocity polygon represent?
Answer: (D) The velocity of one point relative to the other
Velocity polygons are drawn to scale.
What are the two components of acceleration of a point on a rotating link?
Answer: (C) Centripetal (radial) and tangential components
Centripetal = ω²r and tangential = αr.
How is angular acceleration of a link found from its acceleration diagram?
Answer: (B) Tangential component of acceleration divided by the link length
α = a_t/r.
What is the Coriolis component of acceleration?
Answer: (C) 2ωv, which arises when a point slides along a link that is itself rotating
ω is the angular velocity of the link and v the sliding velocity.
In which mechanism is the Coriolis component of acceleration encountered?
Answer: (D) Crank and slotted lever quick return mechanism of a shaper
It exists where a slider moves along a rotating link.
In which direction does the Coriolis component act?
Answer: (A) Perpendicular to the sliding surface, obtained by rotating the sliding velocity 90° in the direction of link rotation
It leads the sliding velocity vector by 90°.
What is Klein's construction used for?
Answer: (B) Finding velocity and acceleration of slider crank parts graphically
It uses a quadrilateral similar to the mechanism diagram.
When can Klein's construction be used?
Answer: (B) When the crank rotates at uniform angular velocity
It works for any crank position.
What are the velocity and acceleration of the piston of a slider crank at the dead centre?
Answer: (D) Velocity is zero, and acceleration is maximum (ω²r(1 + 1/n) at inner dead centre)
n is the ratio of connecting rod length to crank radius.
What is the approximate acceleration of the piston of a slider crank mechanism?
Answer: (C) ω²r(cos θ + cos 2θ/n)
The cos 2θ/n term is the secondary component.
In simple harmonic motion, what is acceleration proportional to?
Answer: (A) Displacement from the mean position
a = −ω²x.
In simple harmonic motion, how does the velocity vector relate to the displacement vector?
Answer: (D) It leads by 90°
Acceleration leads displacement by 180°.
What is the bifilar suspension method used to find?
Answer: (C) The moment of inertia of a body
The body hangs from two parallel wires and oscillates.
When are two systems dynamically equivalent?
Answer: (B) When they have the same mass, the same centre of gravity and the same moment of inertia about the centre of gravity
A connecting rod can be replaced by two point masses this way.
In which direction does an inertia force act?
Answer: (A) Opposite to the direction of acceleration
D'Alembert's principle uses inertia forces.
How does the frequency of a simple pendulum on the Moon compare with that on Earth, taking g on the Moon as one-sixth?
Answer: (D) Its frequency is about 2.45 times lower
f ∝ √g, and √6 ≈ 2.45.
What is the velocity of a point on a crank of radius 0.1 m rotating at 300 rpm?
Answer: (B) About 3.14 m/s
v = ωr = (2π × 300/60) × 0.1 = 3.14 m/s.
What is the centripetal acceleration of a point at radius r on a link rotating at angular velocity ω?
Answer: (C) ω²r, directed towards the centre of rotation
It is also called radial or normal acceleration.
A flywheel accelerates uniformly from rest to 1000 rpm in 6 seconds. About how many revolutions does it make?
Answer: (B) 50
Average speed 500 rpm for 0.1 minute gives 50 revolutions.
What is the angular velocity of a link in terms of the relative velocity of its two ends?
Answer: (A) The relative velocity divided by the length of the link
ω = v_BA/AB.
Where is the instantaneous centre of the coupler of a four-bar mechanism located?
Answer: (C) At the intersection of the extended crank and follower links
This is found using Kennedy's theorem.
Where is the instantaneous centre of a slider relative to the fixed frame?
Answer: (D) At infinity, perpendicular to the line of sliding
A pure translation is rotation about a point at infinity.
What is the effect of a longer connecting rod on the motion of the piston in a slider crank mechanism?
Answer: (A) The motion becomes closer to simple harmonic motion
As n → ∞, the secondary term disappears.
What is the time ratio of a quick return mechanism?
Answer: (D) The ratio of time of cutting stroke to time of return stroke
It is always greater than 1 for quick return mechanisms.