Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Theory of Machines: Mechanisms (Set 2)

Mechanical Engineering · Theory of Machines

26 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What happens to the relative motion between links if a different link of the chain is fixed?

  1. It doubles
  2. It changes completely
  3. It stops
  4. It remains the same
Show answer & solution

Answer: (D) It remains the same

However, the absolute motions change, giving a different mechanism.

Question 2

What is an inversion of a mechanism?

  1. A different mechanism obtained by fixing a different link of the same kinematic chain
  2. Reversing the direction of rotation
  3. Turning the mechanism upside down
  4. Removing one link
Show answer & solution

Answer: (A) A different mechanism obtained by fixing a different link of the same kinematic chain

A chain with L links can have L inversions.

Question 3

What is the degree of freedom of a mechanism?

  1. The number of independent inputs needed to define the position of all links
  2. The number of links
  3. The number of joints
  4. The number of fixed links
Show answer & solution

Answer: (A) The number of independent inputs needed to define the position of all links

A mechanism with one degree of freedom is constrained.

Question 4

What is Grübler's (Kutzbach) criterion for plane mechanisms?

  1. F = 2n − 3j
  2. F = n − j
  3. F = 3n + 2j
  4. F = 3(n − 1) − 2j − h
Show answer & solution

Answer: (D) F = 3(n − 1) − 2j − h

n = links, j = lower pairs (binary joints), h = higher pairs.

Question 5

A mechanism has six links, seven binary joints and no higher pairs. What can be said about it?

  1. It has two degrees of freedom
  2. It is kinematically sound with one degree of freedom
  3. It is a structure
  4. It is impossible
Show answer & solution

Answer: (B) It is kinematically sound with one degree of freedom

F = 3(6 − 1) − 2 × 7 = 1.

Question 6

What does Grashof's law state for a four-bar chain?

  1. No link can rotate
  2. The longest link always rotates
  3. If the sum of the shortest and longest links is less than the sum of the other two, at least one link can rotate fully
  4. All links rotate fully
Show answer & solution

Answer: (C) If the sum of the shortest and longest links is less than the sum of the other two, at least one link can rotate fully

s + l ≤ p + q is the Grashof condition.

Question 7

Which mechanisms are inversions of the four-bar chain?

  1. Elliptical trammel and Scotch yoke
  2. Whitworth quick return and oscillating cylinder engine
  3. Beam engine, coupling rod of a locomotive and Watt's indicator mechanism
  4. Oldham coupling and Scotch yoke
Show answer & solution

Answer: (C) Beam engine, coupling rod of a locomotive and Watt's indicator mechanism

The beam engine is a crank–rocker mechanism.

Question 8

What is the coupling rod of a locomotive an example of?

  1. Double crank mechanism (inversion of four-bar chain)
  2. Double slider crank
  3. Single slider crank
  4. Crank and slotted lever
Show answer & solution

Answer: (A) Double crank mechanism (inversion of four-bar chain)

Opposite links are equal, forming a parallelogram.

Question 9

What shape do the links of a four-bar linkage always form if opposite links are equal?

  1. Pentagon
  2. Parallelogram
  3. Triangle
  4. Trapezium
Show answer & solution

Answer: (B) Parallelogram

This is the parallel-crank four-bar mechanism.

Question 10

How many turning and sliding pairs does a single slider crank chain have?

  1. Two turning and two sliding pairs
  2. One turning and three sliding pairs
  3. Four turning pairs
  4. Three turning pairs and one sliding pair
Show answer & solution

Answer: (D) Three turning pairs and one sliding pair

It is used in reciprocating engines.

Question 11

Which mechanisms are inversions of the single slider crank chain?

  1. Beam engine and coupling rod
  2. Elliptical trammel and Oldham coupling
  3. Whitworth quick return, crank and slotted lever, oscillating cylinder engine, rotary engine and hand pump
  4. Pantograph only
Show answer & solution

Answer: (C) Whitworth quick return, crank and slotted lever, oscillating cylinder engine, rotary engine and hand pump

The reciprocating engine is the basic form.

Question 12

What converts the reciprocating motion of a piston into rotary motion of a crankshaft?

  1. Slider crank mechanism
  2. Four-bar chain
  3. Gear train
  4. Cam and follower
Show answer & solution

Answer: (A) Slider crank mechanism

The connecting rod joins the piston to the crank.

Question 13

Which mechanisms are inversions of the double slider crank chain?

  1. Oscillating cylinder engine
  2. Elliptical trammel, Scotch yoke and Oldham's coupling
  3. Whitworth quick return mechanism
  4. Beam engine and Watt's indicator
Show answer & solution

Answer: (B) Elliptical trammel, Scotch yoke and Oldham's coupling

It has two sliding pairs and two turning pairs.

Question 14

What curve does a point on the link of an elliptical trammel trace?

  1. A straight line
  2. A parabola
  3. A circle
  4. An ellipse
Show answer & solution

Answer: (D) An ellipse

The midpoint of the link traces a circle.

Question 15

Which mechanism gives a mathematically exact straight-line motion using eight links?

  1. Watt mechanism
  2. Grasshopper mechanism
  3. Peaucellier mechanism
  4. Tchebicheff mechanism
Show answer & solution

Answer: (C) Peaucellier mechanism

Hart's mechanism uses six links.

Question 16

How many links does Hart's exact straight-line mechanism have?

  1. Six
  2. Twelve
  3. Eight
  4. Four
Show answer & solution

Answer: (A) Six

It is simpler than the Peaucellier mechanism.

Question 17

What type of linkage is an approximate straight-line mechanism such as Watt's?

  1. Six-bar linkage
  2. Four-bar linkage
  3. Three-bar linkage
  4. Eight-bar linkage
Show answer & solution

Answer: (B) Four-bar linkage

Watt's mechanism was used in the Richard indicator.

Question 18

What is a pantograph?

  1. A gear train
  2. A straight-line mechanism with eight links
  3. A cam mechanism
  4. A four-link mechanism with lower pairs used to copy drawings at an enlarged or reduced scale
Show answer & solution

Answer: (D) A four-link mechanism with lower pairs used to copy drawings at an enlarged or reduced scale

It is also used on electric trains to collect current.

Question 19

Which steering mechanism has only turning pairs?

  1. Davis steering gear
  2. Ackermann steering gear
  3. Oldham coupling
  4. Scotch yoke
Show answer & solution

Answer: (B) Ackermann steering gear

The Davis gear has sliding pairs.

Question 20

Why is the Ackermann steering gear preferred to the Davis gear in vehicles?

  1. It uses turning pairs, which wear less than sliding pairs
  2. It is cheaper to make only
  3. It has more parts
  4. It is mathematically exact
Show answer & solution

Answer: (A) It uses turning pairs, which wear less than sliding pairs

The Davis gear is theoretically correct in all positions.

Question 21

What is the condition for correct steering of a four-wheeled vehicle?

  1. φ = θ always
  2. cot φ + cot θ = b
  3. cot φ − cot θ = c/b, where c is pivot distance and b is wheelbase
  4. tan φ = tan θ
Show answer & solution

Answer: (C) cot φ − cot θ = c/b, where c is pivot distance and b is wheelbase

All wheels then roll about a common centre.

Question 22

Which mechanism is used in a shaper to give a slow cutting stroke and fast return stroke?

  1. Cam and follower
  2. Elliptical trammel
  3. Four-bar double crank
  4. Crank and slotted lever (quick return) mechanism
Show answer & solution

Answer: (D) Crank and slotted lever (quick return) mechanism

The Whitworth mechanism is another quick return mechanism.

Question 23

What is a machine?

  1. A structure with no moving parts
  2. A mechanism or combination of mechanisms that transmits and modifies available energy to do useful work
  3. A single link
  4. A rigid frame
Show answer & solution

Answer: (B) A mechanism or combination of mechanisms that transmits and modifies available energy to do useful work

A lathe and an IC engine are machines.

Question 24

What is the Scott-Russell mechanism made of?

  1. Higher pairs only
  2. Sliding and turning pairs
  3. Only sliding pairs
  4. Only turning pairs
Show answer & solution

Answer: (B) Sliding and turning pairs

It generates an exact straight line.

Question 25

What is a binary link?

  1. A link with four joints
  2. A link with no joints
  3. A link with two joints (pairs)
  4. A link with three joints
Show answer & solution

Answer: (C) A link with two joints (pairs)

Ternary links have three joints.

Question 26

Why is a typewriter key mechanism called a mechanism rather than a machine?

  1. It transmits motion rather than doing significant useful work
  2. It has no fixed link
  3. It has no links
  4. It is a structure
Show answer & solution

Answer: (A) It transmits motion rather than doing significant useful work

A clock is also a mechanism.

Practice these 26 questions interactively →