What is a beam?
Show answer & solution
Answer: (A) A structural member that carries loads mainly by bending
Beams are classified by their supports.
Mechanical Engineering · Strength of Materials
37 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a beam?
Answer: (A) A structural member that carries loads mainly by bending
Beams are classified by their supports.
What is a cantilever beam?
Answer: (D) A beam fixed at one end and free at the other
Balconies and aircraft wings act like cantilevers.
What is a simply supported beam?
Answer: (C) A beam resting on supports at its two ends that allow rotation
The supports provide only vertical reactions.
What is an overhanging beam?
Answer: (D) A beam that extends beyond one or both of its supports
It may have points of contraflexure.
What is a continuous beam?
Answer: (A) A beam with more than two supports
It is statically indeterminate.
What is shear force at a section of a beam?
Answer: (C) The algebraic sum of all vertical forces on either side of the section
It tends to shear the beam across the section.
What is bending moment at a section of a beam?
Answer: (B) The algebraic sum of the moments of all forces on either side of the section about that section
It causes the beam to bend.
What is the relationship between shear force (F) and bending moment (M) along a beam?
Answer: (A) F = dM/dx
Bending moment is maximum where shear force is zero or changes sign.
Where is the bending moment maximum in a beam?
Answer: (C) Where the shear force is zero or changes sign
This is used to locate the critical section.
What is the maximum bending moment in a cantilever of length L carrying a point load W at its free end?
Answer: (D) WL at the fixed end
The bending moment is zero at the free end.
What is the maximum bending moment in a cantilever of length L carrying a uniformly distributed load w per unit length?
Answer: (B) wL²/2 at the fixed end
The shear force diagram is a sloping straight line.
Where does a cantilever carrying an increasing end load fail first?
Answer: (B) At the fixed support
Bending moment is greatest at the fixed end.
What is the maximum bending moment in a simply supported beam of span L carrying a central point load W?
Answer: (C) WL/4 at the centre
Each support reaction is W/2.
What is the maximum bending moment in a simply supported beam of span L carrying a uniformly distributed load w per unit length?
Answer: (A) wL²/8 at mid-span
The bending moment diagram is a parabola.
What is the shape of the bending moment diagram for a simply supported beam carrying a uniformly distributed load?
Answer: (D) Parabola
The shear force diagram is a sloping straight line.
What is the shape of the bending moment diagram for a cantilever with a point load at the free end?
Answer: (A) Triangle (linear variation)
The shear force diagram is a rectangle.
What is a point of contraflexure?
Answer: (C) A point where the bending moment changes sign
It occurs in overhanging and fixed beams.
What does the theory of simple bending state?
Answer: (D) M/I = σ/y = E/R
M is bending moment, I is moment of inertia, y is distance from the neutral axis and R is radius of curvature.
What is the neutral axis of a beam?
Answer: (B) The line in the cross-section where bending stress is zero
In elastic bending, it passes through the centroid of the section.
How does bending stress vary across the depth of a beam?
Answer: (A) Linearly, from zero at the neutral axis to maximum at the extreme fibres
One side is in tension and the other in compression.
What is the section modulus of a beam?
Answer: (D) The ratio of moment of inertia to the distance of the extreme fibre from the neutral axis (Z = I/y_max)
Bending stress = M/Z.
What is the section modulus of a rectangular section of width b and depth d?
Answer: (C) bd²/6
Strength in bending increases with the square of depth.
What is the section modulus of a solid circular section of diameter d?
Answer: (A) πd³/32
For torsion, the polar section modulus is πd³/16.
How is the polar moment of inertia of a circular section related to its moment of inertia about a diameter?
Answer: (C) It is twice as large
J = Ixx + Iyy = 2I.
Why is a rectangular beam stronger when placed with its depth vertical?
Answer: (B) Section modulus bd²/6 is greater when the larger dimension is the depth
Floor joists are placed on edge for this reason.
Why are I-sections widely used as beams?
Answer: (C) Most of the material is placed far from the neutral axis, giving high strength-to-weight ratio
The flanges carry most of the bending stress.
Where is shear stress maximum in a beam of rectangular cross-section?
Answer: (A) At the neutral axis
Shear stress is zero at the extreme fibres.
What is the maximum shear stress in a rectangular beam section compared with the average shear stress?
Answer: (D) 1.5 times
For a solid circular section, it is 4/3 times the average.
What is the shear stress at the top and bottom extreme fibres of a beam?
Answer: (B) Zero
Bending stress is maximum at these fibres.
What is the shear force diagram of a simply supported beam carrying a central point load W?
Answer: (C) Two rectangles of magnitude W/2, changing sign at the centre
The bending moment diagram is a triangle with its peak at the centre.
What is the bending moment at the free end of a cantilever?
Answer: (D) Zero
There are no forces beyond the free end.
What is the bending moment at the supports of a simply supported beam?
Answer: (A) Zero
Simple supports cannot resist moments.
What are the reactions of a simply supported beam of span L carrying a uniformly distributed load w over the whole span?
Answer: (B) wL/2 at each support
The total load wL is shared equally.
What is a uniformly varying load?
Answer: (D) A load whose intensity changes linearly along the beam, such as water pressure on a wall
The total load equals the area of the load diagram.
What is the parallel axis theorem?
Answer: (B) I = I_G + Ah², where h is the distance between the axes
It transfers a moment of inertia from the centroidal axis to a parallel axis.
What is the perpendicular axis theorem?
Answer: (C) For a plane lamina, I_zz = I_xx + I_yy
It gives the polar moment of inertia of plane areas.
What is a beam of uniform strength?
Answer: (A) A beam whose section varies so that the maximum bending stress is the same at every section
Leaf springs approximate beams of uniform strength.