Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Refrigeration & Air Conditioning: Refrigeration Equipment

Mechanical Engineering · Refrigeration & Air Conditioning

39 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the function of the compressor in a refrigeration system?

  1. To store liquid
  2. To expand the refrigerant
  3. To raise the pressure and temperature of refrigerant vapour so that it can condense at ambient temperature
  4. To cool the refrigerant
Show answer & solution

Answer: (C) To raise the pressure and temperature of refrigerant vapour so that it can condense at ambient temperature

It is driven by an electric motor.

Question 2

What type of compressor is used in most domestic refrigerators?

  1. Hermetically sealed reciprocating compressor
  2. Centrifugal compressor
  3. Screw compressor
  4. Axial compressor
Show answer & solution

Answer: (A) Hermetically sealed reciprocating compressor

Many newer models use rotary or inverter compressors.

Question 3

What is a hermetic compressor?

  1. A compressor driven by a belt
  2. A compressor without a motor
  3. A compressor open to air
  4. A compressor and motor sealed together in a welded casing
Show answer & solution

Answer: (D) A compressor and motor sealed together in a welded casing

It prevents refrigerant leakage through shaft seals.

Question 4

Which type of compressor is common in room and split air conditioners?

  1. Axial compressor
  2. Rotary or scroll compressor
  3. Centrifugal compressor
  4. Steam jet compressor
Show answer & solution

Answer: (B) Rotary or scroll compressor

They are compact and quiet.

Question 5

Which type of compressor is used in large central chiller plants?

  1. Small reciprocating compressors only
  2. Centrifugal or screw compressors
  3. Axial fans
  4. Hand pumps
Show answer & solution

Answer: (B) Centrifugal or screw compressors

Centrifugal compressors handle large volumes of vapour.

Question 6

What is an inverter compressor?

  1. A compressor whose speed is varied electronically to match cooling demand
  2. A compressor with fixed speed only
  3. A compressor without a motor
  4. A compressor that runs backwards
Show answer & solution

Answer: (A) A compressor whose speed is varied electronically to match cooling demand

It saves energy compared with on–off control.

Question 7

What is the function of the condenser?

  1. To compress vapour
  2. To absorb heat from the cooled space
  3. To expand the refrigerant
  4. To reject heat from the refrigerant to the surroundings so that the vapour condenses into liquid
Show answer & solution

Answer: (D) To reject heat from the refrigerant to the surroundings so that the vapour condenses into liquid

Condensers may be air-cooled, water-cooled or evaporative.

Question 8

Where are the condenser tubes of a domestic refrigerator usually located?

  1. Under the shelves
  2. Inside the freezer
  3. At the back of the refrigerator
  4. In the door
Show answer & solution

Answer: (C) At the back of the refrigerator

They should have free air flow around them.

Question 9

What is an evaporative condenser?

  1. An air-cooled condenser
  2. A condenser in which water sprayed over the coils evaporates to remove heat
  3. A refrigerant evaporator
  4. A cooling tower without coils
Show answer & solution

Answer: (B) A condenser in which water sprayed over the coils evaporates to remove heat

It combines a condenser and cooling tower.

Question 10

What is the function of the evaporator?

  1. To reject heat
  2. To compress the refrigerant
  3. To store refrigerant
  4. To absorb heat from the space or substance being cooled as the refrigerant evaporates
Show answer & solution

Answer: (D) To absorb heat from the space or substance being cooled as the refrigerant evaporates

It produces the refrigerating effect.

Question 11

What is the effect of frost formation on an evaporator?

  1. It reduces heat transfer and cooling capacity
  2. It has no effect
  3. It improves heat transfer
  4. It increases COP
Show answer & solution

Answer: (A) It reduces heat transfer and cooling capacity

Frost acts as an insulating layer, so defrosting is needed.

Question 12

How does the refrigerating effect of a dry expansion evaporator compare with a flooded evaporator?

  1. It is zero
  2. It is more
  3. It is less
  4. It is the same
Show answer & solution

Answer: (C) It is less

A flooded evaporator keeps its surface fully wetted with liquid.

Question 13

What is the purpose of a suction accumulator in a flooded system?

  1. To heat vapour
  2. To store oil
  3. To collect liquid refrigerant and prevent it from reaching the compressor
  4. To increase pressure
Show answer & solution

Answer: (C) To collect liquid refrigerant and prevent it from reaching the compressor

Liquid entering a compressor can cause damage.

Question 14

What is the function of the expansion device?

  1. To reduce refrigerant pressure and control its flow into the evaporator
  2. To store refrigerant
  3. To compress vapour
  4. To condense vapour
Show answer & solution

Answer: (A) To reduce refrigerant pressure and control its flow into the evaporator

It separates the high- and low-pressure sides.

Question 15

Which expansion device is used in domestic refrigerators?

  1. Automatic expansion valve
  2. Capillary tube
  3. Thermostatic expansion valve
  4. Float valve
Show answer & solution

Answer: (B) Capillary tube

It is a long, narrow tube with no moving parts.

Question 16

What is a thermostatic expansion valve (TEV)?

  1. A capillary tube
  2. A safety valve
  3. A valve with fixed opening
  4. A valve that controls refrigerant flow to keep a constant superheat at the evaporator outlet
Show answer & solution

Answer: (D) A valve that controls refrigerant flow to keep a constant superheat at the evaporator outlet

A sensing bulb on the suction line controls it.

Question 17

What is the purpose of a liquid receiver in a refrigeration system?

  1. To store liquid refrigerant between the condenser and the expansion device
  2. To evaporate liquid
  3. To remove oil
  4. To compress vapour
Show answer & solution

Answer: (A) To store liquid refrigerant between the condenser and the expansion device

It allows for changes in refrigerant charge.

Question 18

What is a drier (filter-drier) used for?

  1. To compress refrigerant
  2. To condense refrigerant
  3. To remove moisture and dirt from the refrigerant
  4. To heat refrigerant
Show answer & solution

Answer: (C) To remove moisture and dirt from the refrigerant

It usually contains silica gel or molecular sieves.

Question 19

What is an oil separator used for?

  1. To remove air
  2. To separate water from refrigerant
  3. To store refrigerant
  4. To separate lubricating oil from compressed refrigerant vapour and return it to the compressor
Show answer & solution

Answer: (D) To separate lubricating oil from compressed refrigerant vapour and return it to the compressor

Oil in the evaporator reduces heat transfer.

Question 20

What is the function of a thermostat in a refrigerator?

  1. To control refrigerant flow
  2. To switch the compressor on and off to maintain the set temperature
  3. To measure pressure
  4. To defrost the freezer
Show answer & solution

Answer: (B) To switch the compressor on and off to maintain the set temperature

Inverter units vary compressor speed instead.

Question 21

What is the purpose of a high-pressure cut-out switch?

  1. To stop the compressor if discharge pressure becomes dangerously high
  2. To control temperature
  3. To defrost the evaporator
  4. To start the compressor
Show answer & solution

Answer: (A) To stop the compressor if discharge pressure becomes dangerously high

It protects the system from damage.

Question 22

Why must cold storage cabinets with a large temperature and vapour pressure difference from the atmosphere have a vapour seal?

  1. To increase cooling
  2. To prevent moisture from entering and condensing or freezing in the insulation
  3. To reduce weight
  4. To let air in
Show answer & solution

Answer: (B) To prevent moisture from entering and condensing or freezing in the insulation

Wet insulation loses its effectiveness.

Question 23

Where is the initial refrigerant charge usually added in an ammonia system?

  1. Directly into the compressor cylinder
  2. Into the oil separator
  3. On the high-pressure side near the receiver
  4. At the evaporator outlet only
Show answer & solution

Answer: (C) On the high-pressure side near the receiver

Charging is done as liquid in the liquid line.

Question 24

What is the function of the condenser fan in an air-cooled condenser?

  1. To circulate water
  2. To blow ambient air over the condenser coils to remove heat
  3. To compress refrigerant
  4. To cool the evaporator
Show answer & solution

Answer: (B) To blow ambient air over the condenser coils to remove heat

Dirty condenser coils reduce efficiency.

Question 25

What is a water-cooled condenser?

  1. An evaporator
  2. A cooling tower without coils
  3. A condenser in which cooling water flows through tubes to condense the refrigerant
  4. A condenser cooled by air only
Show answer & solution

Answer: (C) A condenser in which cooling water flows through tubes to condense the refrigerant

It is used in large plants with cooling towers.

Question 26

Why should the condenser of a split air conditioner be installed in a shaded, well-ventilated place?

  1. To make it look attractive
  2. To reduce noise only
  3. To heat it
  4. Lower ambient temperature around the condenser improves efficiency and capacity
Show answer & solution

Answer: (D) Lower ambient temperature around the condenser improves efficiency and capacity

High condenser temperatures reduce COP.

Question 27

What is a flooded evaporator?

  1. A dry expansion coil
  2. An evaporator flooded with water
  3. An evaporator kept full of liquid refrigerant, with vapour separated in a surge drum
  4. An evaporator with only vapour
Show answer & solution

Answer: (C) An evaporator kept full of liquid refrigerant, with vapour separated in a surge drum

It gives high heat transfer rates.

Question 28

What is a dry expansion evaporator?

  1. A cooling tower
  2. An evaporator in which all liquid refrigerant evaporates before leaving, controlled by an expansion valve
  3. A condenser
  4. An evaporator full of liquid
Show answer & solution

Answer: (B) An evaporator in which all liquid refrigerant evaporates before leaving, controlled by an expansion valve

It is common in air conditioning coils.

Question 29

What is defrosting?

  1. Adding frost to coils
  2. Charging refrigerant
  3. Cooling the condenser
  4. Removing frost from evaporator coils, by stopping the compressor, electric heaters or hot gas
Show answer & solution

Answer: (D) Removing frost from evaporator coils, by stopping the compressor, electric heaters or hot gas

Frost-free refrigerators defrost automatically.

Question 30

What is hot gas defrosting?

  1. Sending hot discharge gas from the compressor through the evaporator to melt frost
  2. Switching off the refrigerator
  3. Using electric heaters
  4. Using warm water only
Show answer & solution

Answer: (A) Sending hot discharge gas from the compressor through the evaporator to melt frost

It is common in commercial systems.

Question 31

What is the main advantage of a capillary tube as an expansion device?

  1. It is simple and cheap, with no moving parts
  2. It adjusts perfectly to all loads
  3. It can be used with any charge quantity
  4. It works best in large plants
Show answer & solution

Answer: (A) It is simple and cheap, with no moving parts

It is suitable for small hermetic systems with a critical charge.

Question 32

What is an automatic (constant pressure) expansion valve?

  1. A thermostatic valve
  2. A valve that maintains constant evaporator pressure regardless of load
  3. A capillary tube
  4. A float valve
Show answer & solution

Answer: (B) A valve that maintains constant evaporator pressure regardless of load

It suits systems with steady loads.

Question 33

What is a float valve used for in refrigeration?

  1. Removing oil
  2. Controlling superheat
  3. Measuring pressure
  4. Controlling refrigerant level in a flooded evaporator
Show answer & solution

Answer: (D) Controlling refrigerant level in a flooded evaporator

Low-side float valves keep the evaporator full.

Question 34

What is an electronic expansion valve?

  1. A capillary tube
  2. A manual valve only
  3. A valve controlled electronically by sensors to adjust refrigerant flow precisely
  4. A float valve
Show answer & solution

Answer: (C) A valve controlled electronically by sensors to adjust refrigerant flow precisely

It is used in modern inverter systems.

Question 35

What is the function of a sight glass in a liquid line?

  1. To remove moisture
  2. To show whether the refrigerant line is full of liquid and whether moisture is present
  3. To control flow
  4. To measure pressure
Show answer & solution

Answer: (B) To show whether the refrigerant line is full of liquid and whether moisture is present

Bubbles may indicate shortage of refrigerant.

Question 36

What is the function of a solenoid valve in a refrigeration system?

  1. To open or close refrigerant flow electrically
  2. To measure temperature
  3. To condense refrigerant
  4. To expand refrigerant continuously
Show answer & solution

Answer: (A) To open or close refrigerant flow electrically

It is used in pump-down control.

Question 37

What is the purpose of a crankcase heater on a compressor?

  1. To increase pressure
  2. To heat the room
  3. To cool the oil
  4. To prevent refrigerant from dissolving in and diluting the oil when the compressor is off
Show answer & solution

Answer: (D) To prevent refrigerant from dissolving in and diluting the oil when the compressor is off

It protects the compressor at start-up.

Question 38

What is volumetric efficiency of a refrigeration compressor?

  1. The ratio of pressures
  2. The ratio of power output to input
  3. The ratio of actual volume of vapour drawn in to the swept volume
  4. The ratio of refrigerating effect to work
Show answer & solution

Answer: (C) The ratio of actual volume of vapour drawn in to the swept volume

Clearance and high pressure ratios reduce it.

Question 39

What is a scroll compressor?

  1. A reciprocating compressor
  2. A centrifugal compressor
  3. A screw compressor with two rotors
  4. A compressor using two interleaved spiral scrolls, one fixed and one orbiting, to compress gas
Show answer & solution

Answer: (D) A compressor using two interleaved spiral scrolls, one fixed and one orbiting, to compress gas

It is quiet and efficient.

Practice these 39 questions interactively →