What is a refrigerant?
Show answer & solution
Answer: (C) A working fluid that absorbs heat at low temperature and rejects it at higher temperature in a refrigeration system
It usually changes phase during the cycle.
Mechanical Engineering · Refrigeration & Air Conditioning
33 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a refrigerant?
Answer: (C) A working fluid that absorbs heat at low temperature and rejects it at higher temperature in a refrigeration system
It usually changes phase during the cycle.
Which of the following is a desirable property of a refrigerant?
Answer: (A) High latent heat of vaporisation
High latent heat gives a large refrigerating effect per kilogram.
Which of the following is an undesirable property of a refrigerant?
Answer: (B) Being a good electrical conductor
In hermetic compressors, the refrigerant contacts the motor windings.
What should be the vapour pressure of a refrigerant at evaporator temperature?
Answer: (A) Slightly higher than atmospheric pressure, so air does not leak into the system
Leaks then go outwards and are easier to detect.
What type of refrigerant should be used for low operating temperatures?
Answer: (D) A refrigerant with a low boiling point
It must evaporate at the low evaporator pressure.
What is the normal boiling point of ammonia at atmospheric pressure?
Answer: (B) About −33 °C
It is widely used in industrial refrigeration.
What are the main properties of ammonia (R-717) as a refrigerant?
Answer: (C) High latent heat and good efficiency, but it is toxic and mildly flammable
It is used in ice plants and cold stores.
Which metal must not be used in ammonia refrigeration systems?
Answer: (D) Copper and its alloys
Ammonia attacks copper in the presence of moisture.
What are CFC refrigerants such as R-12 known for?
Answer: (C) Being non-toxic and non-flammable, but damaging the ozone layer
They have been phased out under the Montreal Protocol.
Which international agreement phased out ozone-depleting refrigerants such as CFCs?
Answer: (A) Montreal Protocol (1987)
Pakistan is a party to the Montreal Protocol.
Which refrigerant replaced R-12 in many domestic refrigerators and car air conditioners?
Answer: (B) R-134a
R-134a does not deplete ozone but has a high global warming potential.
What is R-600a?
Answer: (A) Isobutane, a natural hydrocarbon refrigerant used in many modern domestic refrigerators
It has very low global warming potential but is flammable.
What is R-22?
Answer: (B) An HCFC refrigerant formerly common in air conditioners, now being phased out
It has some ozone depletion potential.
Which refrigerants are widely used in modern inverter split air conditioners?
Answer: (D) R-410A and R-32
They have zero ozone depletion potential.
What does the Kigali Amendment to the Montreal Protocol aim to do?
Answer: (C) Phase down HFC refrigerants with high global warming potential
It was agreed in 2016.
What does ODP stand for in refrigerant selection?
Answer: (C) Ozone depletion potential
R-11 is used as the reference with ODP = 1.
What does GWP stand for in refrigerant selection?
Answer: (D) Global warming potential
It is measured relative to carbon dioxide.
Which refrigerant operates at very high pressures, with a condensing pressure of tens of bar?
Answer: (A) Carbon dioxide (R-744)
It is a natural refrigerant with very low GWP.
Which refrigerant is commonly used in lithium bromide absorption systems?
Answer: (B) Water
Lithium bromide is the absorbent.
How are Freon (halocarbon) leaks traditionally detected?
Answer: (D) With a halide torch, whose flame turns green in the presence of the refrigerant
Electronic leak detectors are now common.
How are ammonia leaks commonly detected?
Answer: (B) By its sharp smell and by burning sulphur sticks, which produce white fumes
Ammonia is easily smelled at low concentrations.
Why is moisture harmful in a Freon refrigeration system?
Answer: (A) It can freeze at the expansion valve and cause corrosion and acids
Driers remove moisture.
What are the safety classifications of refrigerants based on?
Answer: (C) Toxicity and flammability
Classes such as A1 are non-toxic and non-flammable.
What is the main advantage of natural refrigerants such as ammonia, CO₂ and hydrocarbons?
Answer: (D) Very low or zero global warming and ozone depletion potential
Their use is growing under environmental regulations.
Which refrigerant has the lowest boiling point among water, ammonia and R-134a?
Answer: (C) Ammonia
Ammonia boils at −33 °C, R-134a at about −26 °C and water at 100 °C.
What does the "R" number of a refrigerant such as R-134a indicate?
Answer: (A) An ASHRAE designation that identifies its chemical composition
The numbering system follows standard rules.
What is an azeotropic refrigerant mixture?
Answer: (C) A mixture that behaves like a single substance, boiling at constant temperature
R-502 is an azeotropic mixture.
What is temperature glide?
Answer: (B) The change in boiling temperature of a zeotropic refrigerant mixture during evaporation at constant pressure
R-407C has a noticeable glide.
Why must refrigerants be compatible with lubricating oils?
Answer: (C) Oil circulates with the refrigerant and must mix or return to the compressor properly
POE oils are used with HFC refrigerants.
Why are hydrocarbon refrigerants such as R-290 (propane) used with care?
Answer: (D) They are flammable
Charge sizes are limited for safety.
Why is water not used as a refrigerant in domestic refrigerators?
Answer: (A) It freezes at 0 °C and has very low vapour pressure at low temperatures
Water is used only in absorption and steam-jet systems above 0 °C.
What is a critical temperature of a refrigerant?
Answer: (B) The temperature above which it cannot be liquefied by pressure alone
The condensing temperature must be below the critical temperature.
What colour flame does a halide leak detector produce when it detects halocarbon refrigerant?
Answer: (D) Green
The flame is normally blue without refrigerant.