What is a split air conditioner?
Show answer & solution
Answer: (B) A system with the compressor and condenser outdoors and the evaporator and fan indoors, connected by refrigerant pipes
It is quieter indoors than a window unit.
Mechanical Engineering · Refrigeration & Air Conditioning
26 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a split air conditioner?
Answer: (B) A system with the compressor and condenser outdoors and the evaporator and fan indoors, connected by refrigerant pipes
It is quieter indoors than a window unit.
What is a central air conditioning system?
Answer: (D) A system that cools air or water at a central plant and distributes it to many rooms through ducts or pipes
Large buildings and hospitals use central systems.
What is a chiller?
Answer: (D) A machine that cools water for circulation to air handling units in a central air conditioning system
Chillers may be vapour compression or absorption type.
What is an air handling unit (AHU)?
Answer: (B) A unit containing fans, filters, coils and dampers that conditions and circulates air through ducts
It receives chilled water from the chiller.
What is a fan coil unit?
Answer: (C) A small room unit with a fan and coil supplied with chilled or hot water
It is used in hotels and offices.
Why is fresh outside air supplied in air conditioning systems?
Answer: (A) To maintain indoor air quality by diluting carbon dioxide and odours
It adds to the cooling load.
What is year-round (all-season) air conditioning?
Answer: (B) A system that provides cooling with dehumidification in summer and heating with humidification in winter
Reversible heat pumps can provide both.
What is industrial air conditioning used for?
Answer: (C) Maintaining conditions needed for processes or products, such as in textile mills and pharmaceutical plants
Textile mills in Pakistan control humidity to reduce yarn breakage.
What is a cooling load of 1.5 tonnes approximately equal to in kW?
Answer: (C) About 5.3 kW
1 tonne ≈ 3.5 kW.
What is the function of air filters in air conditioning systems?
Answer: (A) To remove dust and particles from the air
Clean filters also protect coils.
What is the purpose of insulating air conditioning ducts?
Answer: (D) To reduce heat gain and prevent condensation on duct surfaces
Uninsulated cold ducts sweat in humid weather.
What is the enthalpy of moist air?
Answer: (C) The sum of the enthalpies of dry air and the water vapour it contains
It is read from the psychrometric chart in kJ/kg of dry air.
What process line on a psychrometric chart represents constant wet-bulb temperature?
Answer: (A) Adiabatic saturation (evaporative cooling)
Wet-bulb lines are almost parallel to enthalpy lines.
What happens to the dew point of air during sensible cooling above the dew point?
Answer: (D) It stays the same
Moisture content does not change.
What is chemical dehumidification?
Answer: (D) Removing moisture from air using desiccants such as silica gel
It is used where very dry air is needed.
What is the main reason air conditioners drip water outside?
Answer: (B) Moisture from room air condenses on the cold evaporator coil and is drained away
This is the dehumidification effect of cooling.
What is reheating in summer air conditioning?
Answer: (A) Heating air after cooling and dehumidification to bring it to a comfortable supply temperature and humidity
It is used where latent loads are high.
What is adiabatic mixing of two air streams?
Answer: (C) Mixing air streams without heat transfer, so the mixture's state lies on the straight line joining them on the psychrometric chart
Fresh air is often mixed with return air.
What is infiltration in cooling load calculations?
Answer: (B) Leakage of outside air into a building through cracks and openings
It adds both sensible and latent heat.
What is the main difference between comfort and industrial air conditioning?
Answer: (C) Comfort AC serves people, while industrial AC maintains conditions needed for processes or products
Hospitals and clean rooms have special requirements.
What is a VRF (variable refrigerant flow) system?
Answer: (D) A multi-split system in which one outdoor unit serves many indoor units with variable refrigerant flow
It is used in offices and apartments.
What is a cooling tower used for in a central air conditioning plant?
Answer: (A) Rejecting heat from the condenser water of water-cooled chillers
It works by evaporative cooling.
What is the "ton" rating of a split air conditioner commonly used in homes in Pakistan?
Answer: (B) About 1 to 2 tonnes
A 1.5-tonne unit is common for a medium room.
What is the purpose of a thermostat in an air conditioning system?
Answer: (A) To maintain the set room temperature by controlling the system
Smart thermostats can also save energy.
Why should air conditioner filters be cleaned regularly?
Answer: (D) Dirty filters reduce air flow, cooling capacity and efficiency
Blocked filters can also cause coil icing.
What is the main purpose of ventilation?
Answer: (C) Replacing stale indoor air with fresh outdoor air
Ventilation controls odours, moisture and carbon dioxide.