Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.
Question 1
What is the main difference between vapour absorption and vapour compression systems?
- Compression systems use heat only
- An absorption system uses heat energy and a pump, instead of a mechanical compressor, to raise refrigerant pressure
- They are the same
- Absorption systems use a bigger compressor
Show answer & solution
Answer: (B) An absorption system uses heat energy and a pump, instead of a mechanical compressor, to raise refrigerant pressure
Absorption systems can use waste heat or steam.
Question 2
Which refrigerant–absorbent pair is used in the common ammonia absorption system?
- Ammonia as refrigerant and water as absorbent
- Water as refrigerant and ammonia as absorbent
- Air and water
- Lithium bromide as refrigerant
Show answer & solution
Answer: (A) Ammonia as refrigerant and water as absorbent
The mixture is called aqua ammonia.
Question 3
Which refrigerant–absorbent pair is used in lithium bromide absorption systems?
- Ammonia and water
- Air and lithium
- Water as refrigerant and lithium bromide as absorbent
- Lithium bromide as refrigerant and water as absorbent
Show answer & solution
Answer: (C) Water as refrigerant and lithium bromide as absorbent
They are used for large air conditioning plants above 0 °C.
Question 4
Which components replace the compressor in a vapour absorption system?
- Expansion valve only
- Absorber, pump and generator
- Turbine and boiler
- Condenser and evaporator
Show answer & solution
Answer: (B) Absorber, pump and generator
The generator drives refrigerant vapour out of the strong solution by heating.
Question 5
In an ammonia absorption plant, which components need cooling water?
- Condenser, absorber and rectifier
- Evaporator only
- Generator only
- Expansion valve only
Show answer & solution
Answer: (A) Condenser, absorber and rectifier
Absorption of ammonia in water releases heat.
Question 6
In which component of an ammonia absorption plant is heat of solution released?
- The generator
- The evaporator
- The expansion valve
- The absorber, where ammonia vapour dissolves in water
Show answer & solution
Answer: (D) The absorber, where ammonia vapour dissolves in water
The absorber must be cooled.
Question 7
What is the purpose of the rectifier (analyser) in an ammonia absorption system?
- To heat the solution
- To remove water vapour from ammonia vapour leaving the generator
- To cool the evaporator
- To pump liquid
Show answer & solution
Answer: (B) To remove water vapour from ammonia vapour leaving the generator
Water vapour would freeze or reduce performance in the evaporator.
Question 8
In the heat exchanger of an ammonia absorption system, in which direction does heat flow?
- From the evaporator to the condenser
- From the condenser to the generator
- From the strong solution to the weak solution
- From the hot weak solution returning to the absorber to the strong solution going to the generator
Show answer & solution
Answer: (D) From the hot weak solution returning to the absorber to the strong solution going to the generator
This reduces the heat needed in the generator.
Question 9
How does the COP of a vapour absorption system compare with a vapour compression system?
- It is generally lower
- It is always greater than 10
- It is generally higher
- It is always equal
Show answer & solution
Answer: (A) It is generally lower
However, absorption systems can use cheap waste heat.
Question 10
What is an important advantage of the absorption refrigeration system?
- Very high COP
- No need for heat
- Quiet operation with few moving parts
- Very small size
Show answer & solution
Answer: (C) Quiet operation with few moving parts
Question 11
What is the Electrolux refrigerator?
- A vapour compression refrigerator
- A thermoelectric refrigerator
- An air cycle refrigerator
- A three-fluid absorption refrigerator using ammonia, water and hydrogen that needs no pump
Show answer & solution
Answer: (D) A three-fluid absorption refrigerator using ammonia, water and hydrogen that needs no pump
Hydrogen equalises total pressure so no pump is needed.
Question 12
What is steam jet refrigeration?
- A system using a high-velocity steam jet to create a vacuum that evaporates water to produce cooling
- A vapour compression system
- An air cycle system
- An absorption system using ammonia
Show answer & solution
Answer: (A) A system using a high-velocity steam jet to create a vacuum that evaporates water to produce cooling
It uses water as the refrigerant.
Question 13
What is thermoelectric refrigeration based on?
- The Joule–Thomson effect
- The Seebeck effect only
- The Peltier effect, in which current through a junction of dissimilar materials absorbs heat
- Evaporation of water
Show answer & solution
Answer: (C) The Peltier effect, in which current through a junction of dissimilar materials absorbs heat
It is used in small portable coolers.
Question 14
What is the Joule–Thomson effect used for in refrigeration?
- Measuring pressure
- Cooling gases by throttling for liquefaction
- Compressing liquids
- Heating gases
Show answer & solution
Answer: (B) Cooling gases by throttling for liquefaction
The Linde process uses it to liquefy air.
Question 15
- Air conditioning
- Food freezing at −18 °C
- Heating systems
- The study and production of very low temperatures, generally below about −150 °C
Show answer & solution
Answer: (D) The study and production of very low temperatures, generally below about −150 °C
Liquid nitrogen boils at −196 °C.
Question 16
- Liquid nitrogen
- Solid carbon dioxide, which sublimes at about −78.5 °C
- Solid ammonia
- Frozen water
Show answer & solution
Answer: (B) Solid carbon dioxide, which sublimes at about −78.5 °C
It is used for transporting frozen goods.
Question 17
What is evaporative cooling?
- Cooling by ice only
- Cooling by vapour compression
- Cooling air by evaporating water into it
- Cooling by absorption
Show answer & solution
Answer: (C) Cooling air by evaporating water into it
Desert coolers in Pakistan use this method and work best in dry heat.
Question 18
Why do desert (evaporative) coolers work poorly during humid monsoon weather?
- Humid air cannot absorb much more water vapour, so little evaporation and cooling occurs
- Water freezes
- They need more electricity
- The fan stops
Show answer & solution
Answer: (A) Humid air cannot absorb much more water vapour, so little evaporation and cooling occurs
They work best in hot, dry conditions.
Question 19
What is the function of the generator in a vapour absorption system?
- To cool the solution
- To condense vapour
- To heat the strong solution and drive off refrigerant vapour
- To expand the refrigerant
Show answer & solution
Answer: (C) To heat the strong solution and drive off refrigerant vapour
Heat may come from steam, gas or waste heat.
Question 20
What is the function of the absorber in an absorption system?
- To absorb low-pressure refrigerant vapour from the evaporator into the weak solution
- To expand liquid
- To heat the solution
- To condense refrigerant
Show answer & solution
Answer: (A) To absorb low-pressure refrigerant vapour from the evaporator into the weak solution
Cooling water removes the heat of absorption.
Question 21
What is the function of the pump in an absorption system?
- To expand the refrigerant
- To compress vapour
- To raise the pressure of the strong solution from the absorber to the generator
- To circulate cooling water only
Show answer & solution
Answer: (C) To raise the pressure of the strong solution from the absorber to the generator
Pumping liquid needs much less work than compressing vapour.
Question 22
What is the main limitation of lithium bromide–water absorption systems?
- They are highly toxic
- They cannot cool below about 0 °C because water is the refrigerant
- They need very high pressure
- They cannot use heat
Show answer & solution
Answer: (B) They cannot cool below about 0 °C because water is the refrigerant
They are used for chilled water in air conditioning.
Question 23
What problem can occur in lithium bromide absorption systems if the solution becomes too concentrated?
- Freezing of ammonia
- Explosion
- Loss of vacuum always
- Crystallisation of lithium bromide
Show answer & solution
Answer: (D) Crystallisation of lithium bromide
Controls keep the solution concentration in a safe range.
Question 24
What is a vapour absorption chiller fired by waste heat used for?
- Producing electricity
- Heating water only
- Compressing gas
- Producing chilled water using exhaust heat from engines or turbines
Show answer & solution
Answer: (D) Producing chilled water using exhaust heat from engines or turbines
It is used in trigeneration plants.
Question 25
What is the main source of energy in a vapour compression system?
- Heat from steam
- Mechanical work, usually from an electric motor
- Gas flame only
- Solar heat only
Show answer & solution
Answer: (B) Mechanical work, usually from an electric motor
Absorption systems use mainly heat energy.
Question 26
What is the Linde process used for?
- Liquefaction of air by repeated compression, cooling and throttling
- Ice making
- Air conditioning
- Steam generation
Show answer & solution
Answer: (A) Liquefaction of air by repeated compression, cooling and throttling
It relies on the Joule–Thomson effect.
Question 27
At what temperature does liquid nitrogen boil at atmospheric pressure?
- About −196 °C
- About −78 °C
- About −33 °C
- About 0 °C
Show answer & solution
Answer: (A) About −196 °C
It is used for freezing biological samples.
Question 28
What is solar-powered refrigeration?
- Refrigeration by wind only
- Refrigeration using coal
- Refrigeration using solar heat for absorption systems or solar electricity for compression systems
- Refrigeration with no energy input
Show answer & solution
Answer: (C) Refrigeration using solar heat for absorption systems or solar electricity for compression systems
It is useful for vaccine storage in remote areas.